Ghodssi R., Lin P., MEMS Materials and Processes Handbook

Подождите немного. Документ загружается.

654 D.W. Burns

378. D. Paul, A. Pallandre, S. Miserere, J. Weber, J.-L. Viovy: Lamination-based rapid proto-

typing of microﬂuidic devices using ﬂexible thermoplastic substrates, Electrophoresis 28,

1115–1122 (2007)

379. R.C. Bening, T.J. McCarthy: Surface modiﬁcation of poly(tetraﬂuoroethylene-co-

hexaﬂuoropropylene), Macromolecules 23(10), 2648–2655 (1990)

380. X. Wang, J. Engel, C. Liu: Liquid crystal polymer (LCP) for MEMS: Processes and

applications, J. Micromech. Microeng. 13, 628–633 (2003)

381. T. Kamal, D.W. Hess: Photoresist removal using low molecular weight alcohols, J.

Electrochem. Soc. 147(7), 2749–2753 (2000)

382. K.S. Lee, G.B. Blanchet, F. Gao, Y.-L. Loo: Direct patterning of conductive water-soluble

polyanaline for thin-ﬁlm organic electronics, Appl. Phys. Lett. 86, 074102 (2005)

383. D.A. Peters, C.A. Deckert: Removal of photoresist ﬁlm residues from wafer surfaces, J.

Electrochem. Soc. 126(5), 883–886 (1979)

384. H. Takahashi: Plasma-less photoresist stripping, ECS Trans. 11(2), 189–195 (2007)

385. J.E. Spencer, R.A. Borel, A. Hoff: High rate photoresist stripping in an oxygen afterglow, J.

Electrochem. Soc. 133(9), 1922–1925 (1986)

386. S.Y.M. Chooi, P.-Y. Ee, V.K.T. Sih, M.-S. Zhou: Application of Ozonated Aqueous Solutions

to Photoresist Strip and Ash Residue Removal Following Plasma Polysilicon Etching,

Proceedings of the 6th International Symposium on Cleaning Technology in Semiconductor

Device Manufacturing, vol. 99–36, pp. 212–218 (Honolulu, HI, October 17–22, 1999)

387. S. Verhaverbeke, J. Zhao: Novel wet photoresist strip for wafer level packaging, ECS Trans.

11(2), 235–238 (2007)

388. A. Andreatta, Y. Cao, J.C. Chiang, A.J. Heeger: Electrically-conductive ﬁbers of polyaniline

spun from solutions in concentrated sulfuric acid, Synth. Metals 26, 383–389 (1988)

389. R.K. Paul, C.K.S. Pillai: Melt/solution processable conducting polyaniline with novel

sulfonic acid dopants and its thermoplastic blends, Synth. Metals 114, 27–35 (2000)

390. W.S. Beh, I.T. Kim, D. Qin, Y. Xia, G.M. Whitesides: Formation of patterned microstruc-

tures of conducting polymers by soft lithography, and applications in microelectronic device

fabrication, Adv. Mater. 11(12), 1038–1041 (1999)

391. Y. Cao, P. Smith, A.J. Heeger: Counter-ion induced processibility of conducting polyaniline

and of conducting polyblends of polyaniline in bulk polymers, Synth. Metals 48, 91–97

(1992)

392. J.W.L. Zhou, H.-Y. Chan, T.K.H. To, K.W.C. Lai, W.J. Li: Polymer MEMS actuators for

underwater micromanipulation, IEEE/ASME Trans. Mechatron. 9(2), 334–342 (2004)

393. D.K. Armani, C. Liu: Microfabrication Technology for Polycaprolactone, a Biodegradable

Polymer, 2000 IEEE Micro Electro Mechanical Systems, MEMS, pp. 294–299 (Miyazaki,

Japan, January 23–27, 2000)

394. C. Chu, M. Bachman, Y.-M. Chiang, F. Gonzales, G.P. Li: Characterizations of metallized

plastic MEMS, Mat. Res. Soc. Symp. Proc. 605, 97–102 (2000)

395. D.G. LeGrand, J.T. Bendler: Handbook of Polycarbonate Science and Technology, Chapter

15 (Marcel Decker, New York, NY, 2000)

396. J.N. Lee, C. Park, G.M. Whitesides: Solvent compatibility of poly(dimethlysiloxane)-based

microﬂuidic devices, Anal. Chem. 75, 6544–6554 (2003)

397. J. Garra, T. Long, J. Currie, T. Schneider, R. White, M. Paranjape: Dry etching of

polydimethylsiloxane for microﬂuidic systems, J. Vac. Sci. Technol. A 20(3), 975–982

(2002)

398. B.-H. Jo, L.M. Van Lerberghe, K.M. Motsegood, D.J. Beebe: Three-dimensional micro-

channel fabrication in polydimethylsiloxane (PDMS) elastomer, J. Microelectromech. Syst.

9(1), 76–81 (2000)

399. A. Plecis, Y. Chen: Fabrication of microﬂuidic devices based on glass-PDMS-glass technol-

ogy, Microelectron. Eng. 84, 1265–1269 (2007)

400. B. Xu, F. Aria, G.M. Whitesides: Making honeycomb microcomposites by soft lithography,

Adv. Mater. 11(6), 492–495 (1999)

8 MEMS Wet-Etch Processes and Procedures 655

401. T.P. Chou, G. Cao: Adhesion of sol-gel-derived organic-inorganic hybrid coatings on

polyester, J. Sol-Gel Sci. Technol. 27, 31–41 (2003)

402. D. Briggs, D.M. Brewis, M.B. Konieczo: X-ray photoelectron spectroscopy studies of

polymer surfaces, J. Mater. Sci. 11, 1270–1277 (1976)

403. J.R. Rasmussen, E.R. Stedronsky, G.M. Whitesides: Introduction, modiﬁcation, and char-

acterization of functional groups on the surface of low-density polyethylene ﬁlm, J. Am.

Chem. Soc. 99(14), 4736–4745 (1977)

404. J. Chen, S.K. Spear, J.G. Huddleston, R.D. Rogers: Polyethylene glycol and solutions of

polyethylene glycol as green reaction media, Green Chem. 7, 64–82 (2005)

405. J.J. Frantzen: Etching Polyester Film, U.S. Patent. No. 3,186,883 (1965)

406. Microsystems Technology Laboratories, MIT: Standard Operating Procedures Kapton Tape,

http://www.mtl.mit.edu/services/fabrication/sops/kapton_tape.html, accessed December 24,

2010

407. R.N. Leyden, W.E. Elias: Method for Selectively Forming Small Diameter Holes in

Polyimide/Kevlar Substrates, U.S. Patent No. 4,889,858

408. A. Bagolini, L. Pakula, T.L.M. Scholtes, H.T.M. Pham, P.J. French, P.M. Sarro: Polyimide

sacriﬁcial layer and novel materials for post-processing surface micromachining, J.

Micromech. Microeng. 12, 385–389 (2002)

409. Transene Company, Inc., Danvers, MA 01923: Kapton Polyimide Film Etchant, http://www.

transene.com/kapton.html, accessed December 24, 2010

410. T. Hattori (Ed.): Ultraclean Surface Processing of Silicon Wafers, Chapter 44 (Springer,

Berlin, 1998)

411. S.Y.M. Chooi, V.K.T. Sih, P.-Y. Ee, H.-S. Park: Post Nitride-STI Trench Etching

(Incorporating DUV Resist and BARC) Polymer Cleaning, Proceedings of the 6th

International Symposium on Cleaning Technology in Semiconductor Device Manufacturing,

vol. 99–36, pp. 219–226 (Honolulu, HI, October 17–22, 1999)

412. S.B. Fuller, E.J. Wilhelm, J.M. Jacobson: Ink-jet printed nanoparticle microelectromechani-

cal systems, J. Microelectromech. Syst. 11(1), 54–60 (2002)

413. M.T. Koesdjojo, C.R. Koch, V.T. Remcho: Technique for microfabrication of polymeric-

based microchips from an SU-8 master with temperature-assisted vaporized organic solvent

bonding, Anal. Chem. 81, 1652–1659 (2009)

414. T.R. Christenson: X-Ray – Based Fabrication, In M. Gad-El-Hak (Ed.): The MEMS

Handbook: MEMS Design and Fabrication, vol. 2, Chapter 5 (CRC/Taylor and Francis, Boca

Raton, FL, 2006)

415. J.-M. Cheng, D.-M. Wang, F.-C. Lin, J.-Y. Lai: Formation and gas ﬂux of asymmetric

PMMA membranes, J. Membr. Sci. 109, 93–107 (1996)

416. E. Meng, P.-Y. Li, Y.-C. Tai: Plasma removal of parylene C, J. Micromech. Microeng. 18,

1–13 (2008)

417. J.T.C. Yeh, K.R. Grebe: Patterning of poly-Para-Xylylenes by Reactive Ion Etching, J. Vac.

Sci. Technol. A, 1(2, 1983, 604-608

418. V.J. Armond, J.R. Atkinson: Chromic acid as an etchant for bulk polypropylene and its use to

study (i) nitric acid attack on polypropylene (ii) crackes in polypropylene induced by tensile

stress, J. Mater. Sci. 4, 509–517 (1969)

419. K.-W. Lee, T.J. McCarthy: Surface-selective hydroxylation of polypropylene,

Macromolecules 21(2), 309–313 (1988)

420. K. Sakaoku, A. Peterlin: Electron microscopy of drawn polypropylene, J. Polym. Sci. 9,

895–915 (1971)

421. C. Luo, A. Govindaraju, J. Garra, T. Schneider, R. White, J. Currie, M. Paranjape: Releasing

SU-8 structures using polystyrene as a sacriﬁcial material, Sens. Actuators A 114, 123–128

(2004)

422. R.-C. Ruaan, T. Chang, D.-M. Wang: Selection criteria for solvent and coagulation medium

in view of macrovoid formation in the wet phase inversion process, J. Polym. Sci. B 37,

1495–1502 (1999)

656 D.W. Burns

423. L.P. Lee, S.A. Berger, D. Liepmann, L. Pruitt: High aspect ratio polymer microstructures and

cantilevers for BioMEMS using low energy ion beam and photolithography, Sens. Actuators

A 71, 144–149 (1998)

424. C.A. Costello, T.J. McCarthy: Surface-selective introduction of speciﬁc functionalities onto

poly(tetraﬂuoroethylene), Macromolecules 20(11), 2819–2828 (1987)

425. C.A. Costello, T.J. McCarthy: Surface Modiﬁcation of Poly(tetraﬂuoroethylene) with

Benzoin Dianion, Macromolecules, 17(12), 2940–2942 (1984)

426. S.R. Kim: Surface modiﬁcation of poly(tetraﬂuoroethylene) ﬁlm by chemical etching,

plasma, and ion beam treatments, J. Appl. Polym. Sci. 77, 1913–1920 (2000)

427. E.M. Petrie (Ed.): Handbook of Adhesives and Sealants, 2nd edn., Chapter 28.5.6 (McGraw-

Hill, New York, NY, 2007)

428. J.M. Engel, J. Chen, D. Bullen, C. Liu: Polyurethane Rubber as a MEMS Material:

Characterization and Demonstration of an All-Polymer Two-Axis Artiﬁcial Hair Cell Flow

Sensor, 2005 IEEE Micro Electro Mechanical Systems, MEMS 279–282 (Miami, FL,

January 30 – February 3, 2005)

429. U.S. Aithal, T.M. Aminabhavi, R.H. Balundgi, S.S. Shukla: Interactions of Organic Solvents

with Polyurethane, Polymer Reviews, 30(1), 43–105 (1990)

430. C.E. Wilkes, J.W. Summers, C.A. Daniels (Eds.): PVC Handbook, Chapter 15 (Hanser,

Munich, 2005)

431. K.H. Lee, H.Y. Kim, Y.M. La, D.R. Lee, N.H. Sung: Inﬂuence of a mixing solvent with

tetrahydrofuran and N,N-dimethylformamide on electrospun poly(vinyl chloride) nonwoven

mats, J. Polym. Sci. B 40, 2259–2268 (2002)

432. Arkema, Inc., Philadelphia, PA: Kynar PVDF Chemical Resistance Chart, http://www.

arkema-inc.com/index.cfm?pag=719, accessed December 24, 2010

433. J.H. Heiss Jr, J.R. Wylie: Removal of RTV Silicon Rubber Encapsulants, U.S. Patent No.

4,089,704 (1978)

434. M. Agarwal, R.A. Gunasekaran, P. Coane, K. Varahramyan: Scum-free patterning of SU-8

resist for electroforming applications, J. Micromech. Microeng. 15, 130–135 (2005)

435. A. Pavolotsky, D. Meledin, C. Risacher, M. Pantaleev, V. Belitsky: Micromachining

approach in fabricating of THz waveguide components, Microelectron. J. 36, 683–686

(2005)

436. P.M. Dentinger, W.M. Clift, S.H. Goods: Removal of SU-8 photoresist for thick ﬁlm

applications, Microelectron. Eng. 61–62, 993–1000 (2002)

437. A. Jourdain, P. De Moor, S. Pamidighantam, H.A.C. Tilmans: Investigation of the

Hermeticity of BCB-Sealed Cavities for Housing (RF-)MEMS Devices, 2002 IEEE Micro

Electro Mechanical Systems, MEMS, pp. 677–680 (Las Vegas, NV, January 20–24, 2002)

438. Dow Chemical: Processing Procedures for Cyclotene 4000 Series Photo BCB Resins,

DS2100 Puddle Develop Process, http://www.dow.com/PublishedLiterature/dh_0055/

0901b80380055101.pdf?ﬁlepath=cyclotene/pdfs/noreg/618-00259.pdf&fromPage=

GetDoc, accessed December 24, 2010

439. R. Kondo, K. Suzuki, S. Sugiyama: Study on Fabrication of High Aspect Ratio

Electrostatic Micro Actuators Using LIGA Process, 1998 International Symposium on

Micromechatronics and Human Science, pp. 155–160 (Nagoya, Japan, November 25–28,

1998)

440. E. Bassous: Fabrication of novel three-dimensional microstructures by the anisotropic etch-

ing of (100) and (110) silicon, IEEE Trans. Electron Devices ED-25(10), 1178–1185

(1978)

441. K.E. Bean: Anisotropic etching of silicon, IEEE Trans. Electron Dev. ED-25(10), 1185–1193

(1978)

442. R.M. Finne, D.L. Klein: A water-amine-complexing agent system for etching s ilicon,

J. Electrochem. Soc. 114(9), 965–970 (1967)

443. D.L. Kendall: Vertical etching of silicon at very high aspect ratios, Ann. Rev. Mater. Sci. 9,

373–403 (1979)

8 MEMS Wet-Etch Processes and Procedures 657

444. G.T.A. Kovacs, N.I. Maluf, K.E. Petersen: Bulk micromachining of silicon, Proc. IEEE

86(8), 1536–1551 (1998)

445. D.B. Lee: Anisotropic etching of silicon, J. Appl. Phys. 40(11), 4569–4574 (1969)

446. K.E. Petersen: Silicon as a mechanical material, Proc. IEEE 70(5), 420–457 (1982)

447. H. Seidel, L. Csepregi, A. Heuberger, H. Baumgartel: Anisotropic etching of crystalline

silicon in alkaline solutions I. Orientation dependence and behavior of passivation layers,

J. Electrochem. Soc. 137(11), 3612–3626 (1990)

448. H. Seidel, L. Csepregi, A. Heuberger, H. Baumgartel: Anisotropic etching of crys-

talline silicon in alkaline solutions II. Inﬂuence of dopants, J. Electrochem. Soc. 137(11),

3626–3632 (1990)

449. S.A. Campbell, H. J. Lewerenz (Eds.): Semiconductor Micromachining, vol. 2, Chapters 1–2

(Wiley, Chichester, 1998)

450. M. Elwenspoek, H.V. Jansen: Silicon micromachining, Chapters 2, 3, 6 and 7 (Cambridge

University Press, Cambridge, 1998)

451. J.W. Gardner, V.K. Varadan, O. O. Awadelkarim: Microsensors, MEMS, and Smart Devices,

Chapters 5, 6 (Wiley, Chichester, 2001)

452. K.R. Williams: Silicon Wet Orientation-Dependent (Anisotropic) Etch Rates, In R. Hull

(Ed.): Properties of Crystalline Silicon, Chapter 16.2 (INSPEC, London, 1999)

453. M. Madou: Fundamentals of Microfabrication, Chapter 4 (CRC, Boca Raton, FL, 1998)

454. M. Madou: Fundamentals of Microfabrication: The Science of Miniaturization, 2nd edn,

Chapter 4 (CRC, Boca Raton, FL, 2002)

455. W. Menz, J. Mohr, O. Paul: Microsystem Technology, Chapter 6 (Wiley, Weinheim,

2001)

456. A. Reisman, M. Berkenblit, S.A. Chan, F.B. Kaufman, D.C. Green: The controlled etching

of silicon in catalyzed ethylenediamine-pyrocatechol-water solutions, J. Electrochem. Soc.

126(8), 1406–1415 (1979)

457. I. Zubel, M. Kramkowska: The effect of alcohol additives on etching characteristics in KOH

solutions, Sens. Actuators A, 101, 255–261 (2002)

458. M. Mehregany, S. D. Senturia: Anisotropic etching of silicon in hydrazine, Sens. Actuators

13, 375–390 (1988)

459. M.J. Declercq, L. Gerzberg, J.D. Meindl: Optimization of the hydrazine-water solution for

anisotropic etching of silicon in integrated circuit technology, J. Electrochem. Soc. 122(4),

545–552 (1975)

460. U. Schnakenberg, W. Benecke, B. Lochel: NH

OH-based etchants for silicon micromachin-

ing, Sens. Actuators A21–A23, 1031–1035 (1990)

461. U. Schnakenberg, W. Benecke, B. Lochel, P. Lange: NH

OH-based etchants for silicon

micromachining: Inﬂuence of additives and stability of passivation layers, Sens. Actuators

A25–A27, 1–7 (1991)

462. U. Schnakenberg, W. Benecke, P. Lange: TMAHW Etchants for Silicon Micromachining,

1991 International Conference on Solid-State Sensors and Actuators, Transducers ’91,

pp. 815–818 (San Francisco, CA, June 24–27, 1991)

463. J.T.L. Thong, W.K. Choi, C .W. Chong: TMAH etching of silicon and the interation of

etching parameters, Sens. Actuators A 63, 243–249 (1997)

464. M. Shikida, K. Sato, K. Tokoro, D. Uchikawa: Differences in anisotropic etching properties

of KOH and TMAH solutions, Sens. Actuators 80, 179–188 (2000)

465. O. Tabata, R. Asahi, H. Funabashi, K. Shimaoka, S. Sugiyama: Anisotropic etching of

silicon in TMAH solutions, Sens. Actuators A 34, 51–57 (1992)

466. I. Zubel, M. Kramkowska: The effect of isopropyl alcohol on etching rate and roughness

of (100) Si surface etched in KOH and TMAH solutions, Sens. Actuators A 93, 138–147

(2001)

467. E. Steinsland, T. Finstad, A. Hanneborg: Etch rates of (100), (111) and (110) single-crystal

silicon in TMAH measured in situ by laser reﬂectance interferometry, Sens. Actuators 86,

73–80 (2000)

658 D.W. Burns

468. A. Merlos, M. Acero, M.H. Bao, J. Bausells, J. Esteve: TMAH/IPA anisotropic etching

characteristics, Sens. Actuators A 37–38, 737–743 (1993)

469. P.M. Sarro, S. Brida, W.v.d. Vlist: Aluminum Passivation in Saturated TMAHW Solutions

for IC-Compatible Microstructures and Device Isolation, SPIE Proceedings, vol. 2879, pp.

242–250 (Austin, TX, September 23, 1996)

470. M. Sekimura: Anisotropic Etching of Surfactant-Added TMAH Solution, 1999 IEEE Micro

Electro Mechanical Systems, MEMS ’99, pp. 650–655 (Orlando, FL, January 17–21, 1999)

471. P.M. Sarro, D. Brida, W.v.d. Vlist, S. Brida: Effect of surfactant on surface quality

of silicon microstructures etched in saturated TMAHW solutions, Sens. Actuators 85,

340–345 (2000)

472. Transene Company, Inc., Danvers, MA 01923: Preferential Silicon Etchants, http://www.

transene.com/si.html, accessed December 24, 2010

473. C.A. Desmond, C.E. Hunt, S.N. Farrens: The effects of process-induced defects on the chem-

ical selectivity of highly doped boron etch stops in silicon, J. Electrochem. Soc. 141(1),

178–184 (1994)

474. N.F. Raley, Y. Sugiyama, T. Van Duzer: (100) silicon etch-rate dependence on boron con-

centration in ethylenediamine-pyrocatachol-water solutions, J. Electrochem. Soc. 131(1),

161–171 (1984)

475. E. Steinsland, M. Nese, A. Hanneborg, R.W. Bernstein, H. Sandmo, G. Kittilsland: Boron

etch-stop in TMAH solutions, Sens. Actuators A 54, 728–732 (1996)

476. J.T. Borenstein, N.D. Gerrish, M.T. Currie, E.A. Fitzgerald: A New Ultra-Hard Etch-Stop

Layer for High Precision Micromachining, 1999 IEEE Micro Electro Mechanical Systems,

MEMS ’99, pp. 205–210 (Orlando, FL, January 17–21, 1999)

477. W.P. Maszara: Silicon-on-insulator by wafer bonding: A review, J. Electrochem. Soc. 138(1),

341–347 (1991)

478. I.G. Stoev, R.A. Yankov, C. Jeynes: Formation of etch-stop structures utilizing ion-beam

synthesized buried oxide and nitride layers in silicon, Sens. Actuators 19, 183–197 (1989)

479. A. Soderbarg: Fabrication of BESOI-Materials Using Implanted Nitrogen as an Effective

Etch Stop Barrier, 1989 IEEE SOS/SOI Technology Conference, pp. 64–65 (Stateline, NV,

USA, October 3–5, 1989)

480. V. Lehmann, K. Mitani, D. Feijoo, U. Gosele: Implanted carbon: An effective etch-stop in

silicon, J. Electrochem. Soc. 138(5), L3–L4 (1991)

481. S.S. Wang, V.M. McNeil, M.A. Schmidt: An etch-stop utilizing selective etching of N-Type

silicon by pulsed potential anodization, J. Microelectromech. Syst. 1(4), 187–192 (1992)

482. J.W. Faust Jr, E.D. Palik: Study of the orientation dependent etching and initial anodization

of si in aqueous KOH, J. Electrochem. Soc. 130(6), 1413–1420 (1983)

483. T.N. Jackson, M.A. Tischler, K.D. Wise: An electrochemical p-n junction etch-stop for the

formation of silicon microstructures, IEEE Electron Device Lett. EDL-2(2), 44–45 (1981)

484. R.L. Meek: Electrochemically thinned N/N+ epitaxial silicon – Method and applications, J.

Electrochem. Soc. 118(7), 1240–1246 (1971)

485. H.J.A. van Dijk, J. de Jonge: Preparation of thin silicon crystals by electrochemical thinning

of epitaxially grown structures, J. Electrochem. Soc. 117(4), 554–554 (1970)

486. M.J.J. Theunissen, J.A. Appels, W.H.C.G. Verkuylen: Application of preferential electro-

chemical etching of silicon to semiconductor device technology, J. Electrochem. Soc. 117(7),

959–965 (1970)

487. C.J.M. Eijkel, J. Branebjerg, M. Elwenspoek, F.C.M. van de Pol: A new technology for

micromachining of silicon: Dopant selective HF anodic etching for the realization of

low-doped monocrystalline silicon structures, IEEE Electron Device Lett. 11(12), 588–589

(1990)

488. C.P. Wen, K.P. Weller: Preferential electrochemical etching of P+ silicon in an aqueous HF-

electrolyte, J. Electrochem. Soc. 119(4), 547–548 (1972)

489. Y. Linden, L. Tenerz, J. Tiren, B. Hok: Fabrication of three-dimensional silicon structures

by means of doping-selective etching (DSE), Sens. Actuators 16, 67–82 (1989)

8 MEMS Wet-Etch Processes and Procedures 659

490. B. Kloeck, S.D. Collins, N.F. De Rooij, R.L. Smith: Study of electrochemical etch-stop for

high-precision thickness control of silicon membranes, IEEE Trans. Electron Dev. 36(4),

663–669 (1989)

491. R.L. Smith, B. Kloeck, N. De Rooij, S.D. Collins: The potential dependence of silicon

anisotropic etching in KOH at 60C, J. Electroanal. Chem. 238, 103–113 (1987)

492. K.J. Ma, K. Najaﬁ: A New Capacitive Electro-Chemical Etch-Stop Technique, 1994 IEEE

Micro E lectro Mechanical Systems, MEMS ’94, pp. 158–163 (Oiso, Japan, January 25–28,

1994)

493. L. Smith, A. Soderbarg: Electrochemical etch stop obtained by accumulation of free carriers

without p-n junction, J. Electrochem. Soc. 140(1), 271–275 (1993)

494. M.K. Andrews, G.C. Turner: bipolar effects in the fabrication of silicon membranes by the

anodic etch stop, Sens. Actuators A 29, 49–57 (1991)

495. M. Hirata, K. Suzuki, H. Tanigawa: Silicon diaphragm pressure sensors fabricated by anodic

oxidation etch-stop, Sens. Actuators 13, 63–70 (1988)

496. M. Hirata, S. Suwazono, H. Tanigawa: Diaphragm thickness control in silicon pressure

sensors using an anodic oxidation etch-stop, J. Electrochem. Soc. 134(8), 2037–2041 (1987)

497. C.M.A. Ashruf, P.J. French, P.M.M.C. Bressers, P.M. Sarro, J.J. Kelly: A new contactless

electrochemical etch-stop based on a gold/silicon/TMAH galvanic cell, Sens. Actuators A

66, 284–291 (1998)

498. P.J. French, M. Nagao, M. Esashi: Electrochemical etch-stop in TMAH without externally

applied bias, Sens. Actuators A 56, 279–280 (1996)

499. C.M.A. Ashruf, P.J. French, P.M. Sarro, R. Kazinczi, X.H. Xia, J.J. Kelly: Galvanic etching

for sensor fabrication, J. Micromech. Microeng. 10, 505–515 (2000)

500. M.C. Acero, J. Esteve, C. Burrer, A. Gotz: Electrochemical etch-stop characteristics of

TMAH:IPA solutions, Sens. Actuators A 46–47, 22–26 (1995)

501. S.A. Campbell, H.J. Lewerenz (Eds.): Semiconductor Micromachining, vol. 2, Chapter 2

(Wiley, Chichester, 1998)

502. H. Nielsen, D. Hackleman: Some illumination on the mechanism of SiO

etching in HF

solutions, J. Electrochem. Soc. 130(3), 708–712 (1983)

503. T. Yoshida, T. Kudo, K. Ikeda: Photo-Induced Preferential Anodization for Fabrication

of Monocrystalline Micromechanical Structures, Proceedings of MEMS ’92, pp. 56–61

(Travemunde, Germany, February 4–7, 1992)

504. E. Peeters, D. Lapadatu, R. Puers, W. Sansen: PHET, an electrodeless photovoltaic electro-

chemical etchstop technique, J. Microelectromech. Syst. 3(3), 113–123 (1994)

505. R.W. Ade, E.E. Harstead, A.H. Amirfazli, T. Cacouris, E.R. Fossum, P.R. Prucnal, R.M.

Osgood Jr: Silicon photodetector structure for direct coupling of optical ﬁbers to integrated

circuits, IEEE Trans. Electron Devices, ED-34(6), 1283–1289 (1987)

506. L. Tenerz, B. Hok: Micromachining of three-dimensional silicon structures using photoelec-

trochemical etching, Electron. Lett. 21(25–26), 1207–1209 (1985)

507. M. Garin, T. Trifonov, A. Rodriguez, L.F. Marsal, R. Alcubilla: Optical PRoperties of 3D

macroporous silicon s tructures, Mater. Sci. Eng. B 149, 275–280 (2008)

508. J. Schilling, F. Muller, S. Matthias, R.B. Wehrspohn, U. Gosele: Three-dimensional pho-

tonic crystals based on macroporous silicon with modulated pore diameter, Appl. Phys. Lett.

78(9), 1180–1182 (2001)

509. R. Mlcak, H.L. Tuller, P. Greiff, J. Sohn: Photo-Assisted Electrochemical Machining of

Micromechanical Structures, Proceedings of MEMS ’93, pp. 225–229 (Fort Lauderdale, FL,

February 7–10, 1993)

510. R. Mlcak, H.L. Tuller, P. Greiff, J. Sohn, L. Niles: Photoassisted electrochemical microma-

chining of silicon in hf electrolytes, Sens. Actuators A 40, 49–55 (1994)

511. E.H. Klaassen, R.J. Reay, C. Storment, G.T. A. Kovacs: Micromachined thermally isolated

circuits, Sens. Actuators A 58, 43–50 (1997)

512. K. Biswas, S. Kal: Etch characteristics of KOH, TMAH and dual doped TMAH for bulk

micromachining of silicon, Microelectron. J. 37, 519–525 (2006)

660 D.W. Burns

513. A.E.T. Kuiper, E.G.C. Lathouwers: room-temperature HF vapor-phase cleaning for low-

pressure chemical vapor deposition of epitaxial Si and SiGe layers, J. Electrochem. Soc.

139(9), 2594–2599 (1992)

514. E. Hoffman, B. Warneke, E. Kruglick, J. Weigold, K.S.J. Pister: 3D Structures with

Piezoresistive Sensors in Standard CMOS, 1995 IEEE Micro Electro Mechanical Systems,

MEMS ’95, pp. 288–293 (Amsterdam, January 29 – February 2, 1995)

515. P.B. Chu, J.T. Chen, R. Yeh, G. Lin, J.C.P. Huang, B.A. Warneke, S.J. Pister: Controlled

pulse-etching with xenon diﬂuoride, 1997 International Conference on Solid-State Sensors

and Actuators, Transducers ’97, pp. 665–668 (Chicago, IL, June 16–19, 1997)

516. K. Hamaguchi, T. Tsuchiya, K. Shimaoka, H. Funabashi: 3-nm gap fabrication using

gas phase sacriﬁcial etching for quantum devices, 2004 IEEE Micro Electro Mechanical

Systems, MEMS 2004, pp. 418–421 (Maastricht, The Netherlands, Jan 25–29, 2004)

517. J.D. Brazzle, M.R. Dokmeci, C.H. Mastrangelo: Modeling and characterization of sacri-

ﬁcial polysilicon etching using vapor-phase xenon diﬂuoride, 2004 IEEE Micro Electro

Mechanical Systems, MEMS 2004, pp. 737–740 (Maastricht, The Netherlands, Jan 25–29,

2004)

518. G. Xuan, T.N. Adam, J. Suehle, E. Fitzgerald, P.Lv,N. Sustersic, M.J. Coppinger, J.

Kolodzey: Xenon diﬂuoride dry etching of Si, SiGe alloy and Ge, 2006 International SiGe

Technology and Device Meeting, pp. 142–143 (Princeton, NJ, October 30, 2006)

519. T. Zhu, P. Argyrakis, E. Mastropaolo, K.K. Lee, R. Cheung: Dry etch release processes for

micromachining applications, J. Vac. Sci. Technol. B 25(6), 2553–2557 (2007)

520. F. Ayazi, K. Najaﬁ: High-Aspect-Ratio Dry-Release Poly-Silicon MEMS Technology

for Inertial-Grade Microgyroscopes, IEEE Position Location and Navigation Symposium,

pp. 304–308 (San Diego, CA, March 13–16, 2000)

521. P.F. Van Kessel, L. Hornbeck, R.E. Meier, M.R. Douglass: A MEMS-based projection

display, Proc. IEEE 86(8), 1687–1704 (1998)

522. C.W. Storment, D.A. Borkholder, V. Westerlind, J.W. Suh, N.I. Maluf, G.T.A. Kovacs:

Flexible, dry-released process for aluminum electrostatic actuators, J. Microelectromech.

Syst. 3(3), 90–96 (1994)

523. D.W. Burns: unpublished result

524. R.T. Howe, R.S. Muller: Polycrystalline silicon micromechanical beams, J. Electrochem.

Soc. 130(6), 1420–1423 (1983)

525. H. Guckel, D.W. Burns: Planar Processed Polysilicon Sealed Cavities for Pressure

Transducer Arrays, 1984 International Electron Devices Meeting, vol. 30, pp. 223–225 (San

Francisco, CA, December, 1984)

526. D.J. Monk, D.S. Soane, R.T. Howe: Hydroﬂuoric acid etching of silicon dioxide sacriﬁcial

layers I. Experimental observations, J. Electrochem. Soc. 141(1), 264–269 (1994)

527. D.J. Monk, D.S. Soane, R.T. Howe: Hydroﬂuoric acid etching of silicon dioxide sacriﬁcial

layers II. Modeling, J. Electrochem. Soc. 141(1), 270–274 (1994)

528. S.-J. Lee, S.-Y. Roh, C.-J. Kim: A New sacriﬁcial layer improving the structural char-

acteristics of micro electromechanical systems, J. Korean Phys. Soc. 32(5), 731–734

(1998)

529. J. Anguita, F. Briones: HF/H2O vapor etching of SiO

sacriﬁcial layer for large-area surface-

micromachined membranes, Sens. Actuators A 64, 247–251 (1998)

530. H. Cao, R.J. Weber: Vapor HF Sacriﬁcial Etching for Phosphorus Doped Polycrystalline

Silicon Membrane Structures, IEEE International Conference on Electro/Information

Technology, EIT, pp. 289–293 (Ames, IA, USA, May 18–20, 2008)

531. A. Witvrouw, B. Du Bois, P. De Moor, A. Verbist, C. Van Hoof, H. Bender, C. Baert: A

comparison between wet HF etching and vapor HF etching for sacriﬁcial oxide removal,

Proc. SPIE, 4174, 130–141 (2000)

532. K. Hjort: Sacriﬁcial etching of III-V compounds for micromechanical devices, J.

Micromech. Microeng. 6, 370–375 (1996)

8 MEMS Wet-Etch Processes and Procedures 661

533. M.Y. Sim, S. Gleixner: Studying the Etch Rates and Selectivity of SiO

and Al in BHF

Solutions, 16th Biennial University/Government/Industry Microelectronics Symposium, pp.

225–228 (San Jose, CA, June 25–28, 2006)

534. R. Lanz, P. Carazzetti, P. Muralt: Surface Micromachined BAW Resonators Based on AlN,

IEEE Ultrasonics Symposium, pp. 981–983 (Munich, Germany, October 8–11, 2002)

535. A.E. Franke, D. Bilic, D.T. Chang, P.T. Jones, T.-J. King, R.T. Howe, G.C. Johnson:

Post-CMOS Integration of Germanium Microstructures, 12th International Conference on

Micro-Electro-Mechanical Systems MEMS ’99, pp. 630–637 (Orlando, FL, January 17–21,

1999)

536. A. Maciossek, B. Lochel, H.-J. Quenzer, B. Wagner, S. Schulze, J. Noetzel:

Galvanoplating and sacriﬁcial layers for surface micromachining, Microelectron. Eng. 27,

503–508 (1995)

537. D.P. Kelly, M.W. Pruessner, K. Amarnath, M. Datta, S. Kanakaraju, L.C. Calhoun, R.

Ghodssi: Monolithic suspended optical waveguides for InP MEMS, IEEE Photon. Technol.

Lett. 16(5), 1298–1300 (2004)

538. A.B. Frazier, M.G. Allen: High Aspect Ratio Electroplated Microstructures Using a

Photosensitive Polyimide Process, 1992 IEEE Micro Electro Mechanical Systems, MEMS

’92, pp. 87–92 (Travemunde, Germany, February 4–7, 1992)

539. C.G. Keller, R.T. Howe: Nickel-Filled Hexsil Thermally Actuated Tweezers, 1995

International Conference on Solid-State Sensors and Actuators, Transducers ’95, pp.

376–379 (Stockholm, Sweden, June 25–29, 1995)

540. Z. Cui, R.A. Lawes: A new sacriﬁcial layer process for the fabrication of micromechanical

systems, J. Micromech. Microeng. 7, 128–130 (1997)

541. H. Guckel, K.J. Skrobis, T.R. Christenson, J. Klein, S. Han, B. Choi, E.G. Lovell: Fabrication

of Assembled Micromechanical Components via Deep X-Ray Lithography, 1991 IEEE

Micro Electro Mechanical Systems, MEMS ’91, pp. 74–79 (Nara, Japan, January 30 –

February 2, 1991)

542. H. Guckel: High-aspect-ratio micromachining via deep x-ray lithography, Proc. IEEE 86(8),

1586–1593 (1998)

543. H. Guckel, T.R. Christenson, K.J. Skrobis, D.D. Denton, B. Choi, E.G. Lovell, J.W. Lee, S.S.

Bajikar, T.W. Chapman: Deep X-Ray and UV Lithographies for Micromechanics, 4th IEEE

Solid-State Sensor and Actuator Workshop, pp. 118–122 (Hilton Head Island, SC, June 4–7,

1990)

544. H. Guckel, K.J. Skrobis, T.R. Christenson, J. Klein: Micromechanics for actuators via deep

x-ray lithography, Proc. SPIE 2194, 2–10 (1994)

545. X. Huang, G. Liu, X. Ying, J. Wang, Y. Guo, C. Kang, Y. Tian: Applications of thick

sacriﬁcial-layer of zinc in liga process, Microsyst. Technol. 14, 1257–1261 (2008)

546. S.D. Leith, D.T. Schwartz: In-situ fabrication of sacriﬁcial layers in electrodeposited NiFe

microstructures, J. Micromech. Microeng. 9, 97–104 (1999)

547. K.E. Petersen: Micromechanical light modulator array fabricated on silicon, Appl. Phys.

Lett. 31(8), 521–523 (1977)

548. K. Walsh, J. Norville, Y.-C. Tai: Photoresist as a Sacriﬁcial Layer by Dissolution in Acetone,

2001 IEEE Micro Electro Mechanical Systems, MEMS, pp. 114–117 (Interlaken, Sweden,

January 21–25, 2001)

549. M.A. Schmidt, R.T. Howe, S.D. Senturia, J.H. Haritonidis: Design and calibration of

a microfabricated ﬂoating-element shear-stress sensor, IEEE Trans. Electron Dev. 35(6),

750–757 (1988)

550. O. Paul, D. Westberg, M. Hornung, V. Ziebart, H. Baltes: Sacriﬁcial Aluminum Etching for

CMOS Microstructures, 1997 IEEE Micro Electro Mechanical Systems, MEMS ’97, pp.

523–528 (Nagoya, Japan, January 26–30, 1997)

551. K. Suzuki, I. Shimoyama, H. Miura: Insect-model based microrobot with elastic hinges, J.

Micromech. Syst. 3(1), 4–9 (1994)

662 D.W. Burns

552. C.E. White, T. Anderson, C.L. Henderson, H.D. Rowland, W.P. King: Microsystems manu-

facturing via embossing of photodeﬁnable thermally sacriﬁcial materials, Proc. SPIE 5374,

361–370 (2004)

553. S. Chang, W. Eaton, J. Fulmer, C. Gonzalez, B. Underwood, J. Wong, R.L. Smith:

Micromechanical Structures in Amorphous Silicon, 1991 International Conference on Solid-

State Sensors and Actuators, Transducers ’91, pp. 751–754 (San Francisco, CA, June 24–27,

1991)

554. L.J. Spangler, K.D. Wise: A New Silicon-on-Glass Process for Integrated Sensors, IEEE

Solid-State Sensor and Actuator Workshop, pp. 140–143 (Hilton Head Island, SC, June 6–9,

1988)

555. S.T. Cho: A batch dissolved wafer process for low cost sensor applications, Proc. SPIE

2639(10), 10–17 (1995)

556. T.E. Bell, P.T.J. Gennissen, D. DeMunter, M. Kuhl: Porous silicon as a sacriﬁcial material,

J. Micromech. Microeng. 6, 361–369 (1996)

557. P. Steiner, A. Richter, W. Lang: Using porous silicon as a sacriﬁcial layer, J. Micromech.

Microeng. 3, 32–36 (1993)

558. W. Lang, P. Steiner, A. Richter, K. Marusczyk, G. Weimann, H. Sandmaier: Application of

porous silicon a s a sacriﬁcial layer, Sens. Actuators A 43, 239–242 (1994)

559. T. Bischoff, G. Muller, W. Welser, F. Koch: Frontside micromachining using porous-silicon

sacriﬁcial-layer technologies, Sens. Actuators A 60, 228–234 (1997)

560. B.L. Bircumshaw, M.L. Wasilik, E.B. Kim, Y.R. Su, H. Takeuchi, C.W. Low, G. Liu,

A.P. Pisano, T.-J. King, R.T. Howe: Hydrogen Peroxide Etching and Stability of P-Type

Poly-SiGe Films, 2004 IEEE Micro Electro Mechanical Systems, MEMS, pp. 514–519

(Maastricht, The Netherlands, January 25–29, 2004)

561. P.R. Scheeper, W. Olthuis, P. Bergveld: Fabrication of a Subminiature Silicon Condenser

Microphone Using the Sacriﬁcial Layer Technique, 1991 International Conference on Solid-

State Sensors and Actuators, Transducers ’91, pp. 408–411 (San Francisco, CA, June 24–27,

1991)

562. W. Kronast, B. Muller, W. Siedel, A. Stoffel: Single-chip condenser microphone using

porous silicon as sacriﬁcial layer for the air gap, Sens. Actuators A 87, 188–193

(2001)

563. A.H. Ma, S.-Ho Tsang, M. Parameswaran, A.M. Leung: Spin-On Glass as a Sacriﬁcial Layer

for Patterned Metallization of Compliant SU-8 Microstructures, Canadian Conference on

Electrical and Computer Engineering, CCECE 2007, pp. 288–291 (Vancouver, BC, April

22–26, 2007)

564. V. Conedera, L. Salvagnac, N. Fabre, F. Zamkotsian, H. Camon: Surface micromachining

technology with two SU-8 structural layers and sol-gel, SU-8 or SiO

/sol-gel sacriﬁcial

layers, J. Micromech. Microeng. 17, N52–N57 (2007)

565. K. Yamada, T. Kuriyama: A New Modal Mode Controlling Method for a Surface Format

Surrounding Mass Accelerometer, 1991 International Conference on Solid-State Sensors

and Actuators, Transducers ’91, pp. 655–658 (San Francisco, CA, June 24–27, 1991)

566. N.C. MacDonald, L.Y. Chen, J.J. Yao, Z.L. Zhang, J.A. McMillan, D.C. Thomas:

Selective chemical vapor deposition of tungsten for microelectromechanical structures,

Sens. Actuators 20, 123–133 (1989)

567. L.-Y. Chen, N.C. MacDonald: A Selective CVD Tungsten Process for Micromotors, 1991

International Conference on Solid-State Sensors and Actuators, Transducers ’91, pp. 739–

742 (San Francisco, CA, June 24–27, 1991)

568. J.C. North, T.E. McGahan, D.W. Rice, A.C. Adams: Tapered windows in phosphorus-doped

SiO

by ion implantation, IEEE Trans. Electron Devices ED-25(7), 809–812 (1978)

569. J. Gotzlich, H. Ryssel: Tapered windows in SiO

,Si

, and polysilicon layers by ion

implantation, J. Electrochem. Soc. 128(3), 617–619 (1981)

570. A.S. Tenney, M. Ghezzo: Etch rates of doped oxides in solutions of buffered HF, J.

Electrochem. Soc. 120(8), 1091–1095 (1973)

8 MEMS Wet-Etch Processes and Procedures 663

571. L.K. White: Bilayer taper etching of ﬁeld oxides and passivation layers, J. Electrochem. Soc.

127(12), 2687–2693 (1980)

572. S. Sugiyama, T. Suzuki, K. Kawahata, K. Shimaoka, M. Takigawa, I. Igarashi: Micro-

Diaphragm Pressure Sensor, International Electron Devices Meeting, pp. 184–187

(Los Angeles, CA, December 7–10, 1986)

573. C.H. Mastrangelo, C.H. Hsu: Mechanical stability and adhesion of microstructures under

capillary forces-part i: basic theory, J. Microelectromech. Syst. 2(1), 33–43 (1993)

574. C.H. Mastrangelo, C.H. Hsu: Mechanical stability and adhesion of microstructures under

capillary forces-part ii: experiments, J. Microelectromech. Syst. 2(1), 44–55 (1993)

575. R.C. Weast (Ed.): CRC Handbook of Chemistry and Physics, 60th edn. (CRC Press, Boca

Raton, FL), 1979/1980

576. G.T. Mulhern, D.S. Soane, R.T. Howe: Supercritical Carbon Dioxide Drying of

Microstructures, 1993 International Conference on Solid-State Sensors and Actuators,

Transducers ’93, pp. 296–299 (Yokohama, Japan, June 7–10, 1993)

577. C.W. Dyck, J.H. Smith, S.L. Miller, E.M. Russick, C.L.J. Adkins: Supercritical Carbon

Dioxide Solvent Extraction from Surface-Micromachined Micromechanical Structures,

SPIE Micromachining a nd Microfabrication (Austin, TX, October 14–15, 1996)

578. D.W. Burns: unpublished result (1988)

579. H. Guckel, J.J. Sniegowski, T.R. Christenson: Fabrication of micromechanical devices from

polysilicon ﬁlms with smooth surfaces, Sens.Actuators 20, 117–122 (1989)

580. N. Takeshima, K.J. Gabriel, M. Ozaki, J. Takahashi, H. Horiguchi, H. Fujita: Electrostatic

Parallelgram Actuators, 1991 International Conference on Solid-State Sensors and

Actuators, Transducers ’91, pp. 63–66 (San Francisco, CA, June 24–27, 1991)

581. R. Legtenberg, H.A.C. Tilmans: Electrostatically driven vacuum-encapsulated polysilicon

resonators: Part I. Design and fabrication, Sens. Actuators A 45, 57–66 (1994)

582. J.Y. Kim, C.-J. Kim: Comparative Study of Various Release Methods for Polysilicon Surface

Micromachining, 1997 IEEE Micro Electro Mechanical Systems, MEMS ’97, pp. 442–447

(Nagoya, Japan, January 26–30, 1997)

583. L. Alley, G.J. Cuan, R.T. Howe, K. Komvopoulos: The Effect of Release-Etch Processing on

Surface Microstructure Stiction, Technical Digest of the 5th Solid-State Sensor and Actuator

Workshop, pp. 202–207 (Hilton Head Island, SC, USA, June 22–25, 1992)

584. W.R. Ashurst, C. Yau, C. Carraro, C. Lee, G.J. Kluth, R.T. Howe, R. Maboudian: Alkene

based monolayer ﬁlms as anti-stiction coatings for polysilicon MEMS, Sens. Actuators A

91, 239–248 (2001)

585. U. Srinivasan, M.R. Houston, R.T. Howe, R. Maboudian: Alkyltrichlorosilane-based

self-assembled monolayer ﬁlms for stiction reduction in silicon micromachines,

J. Microelectromech. Syst. 7(2), 252–260 (1998)

586. B.H. Kim, T.D. Chung, C.H. Oh, K. Chun: A new organic modiﬁer for anti-stiction, J.

Microelectromech. Syst. 10(1), 33–40 (2001)

587. W.R. Ashurst, C. Carraro, R. Maboudian, W. Frey: Wafer level anti-stiction coatings for

MEMS, Sens. Actuators A 104, 213–221 (2003)

588. J.R. Martin: Process for Wafer Level Treatment to Reduce Stiction and Passivate

Micromachined Surfaces and Compounds Used Therefor, U.S. Patent No. 7,364,942

(2008)

589. M. Ito, K. Yamagata, H. Miyabayashi, T. Yonehara: Scalability Potential in ELTRAN



SOI-

Epi Wafer, IEEE International SOI Conference, pp. 10–11 (Wakeﬁeld, MA, USA, October

2–5, 2000)

590. T. Yonehara, K. Sakaguchi, N. Sato: Epitaxial layer transfer by bond and etch back of porous

Si, Appl. P hys. Lett. 64(16), 2108–2110 (1994)

591. G. Barillaro, A. Nannini, M. Piotto: Electrochemical etching in HF solutions for silicon

micromachining, Sens. Actuators A 102, 195–201 (2002)

592. H. Foll, M. Christophersen, J. Carstensen, G. Hasse: Formation and application of porous

silicon, Mater. Sci. Eng. R, 39, 93–141 (2002)