Ghodssi R., Lin P., MEMS Materials and Processes Handbook
Подождите немного. Документ загружается.
254 E. Meng et al.
73. V. Seidemann, S. Butefisch, S. Buttgenbach: Fabrication and investigation of in-plane com-
pliant SU8 structures for MEMS and their application to micro valves and micro grippers,
Sens. Act. A Phys. 97–98, 457–461 (2002)
74. C. Luo, A. Govindaraju, J. Garra et al.: Releasing SU-8 structures using polystyrene as a
sacrificial material, Sens. Act. A Phys. 114, 123–128 (2004)
75. J. Liu, B. Cai, J. Zhu et al.: A novel device of passive and fixed alignment of optical fiber,
Microsyst. Technol. Micro Nanosyst. Inf. Storage Process. Syst. 10, 269–271 (2004)
76. P. Basset, A. Kaiser, D. Collard et al.: Process and realization of a three-dimensional gold
electroplated antenna on a flexible epoxy film for wireless micromotion system, J. Vac. Sci.
Technol. B 20, 1465–1470 (2002)
77. G. Kim, B. Kim, J. Brugger: All-photoplastic microstencil with self-alignment for multiple
layer shadow-mask patterning, Sens. Act. A Phys. 107, 132–136 (2003)
78. V. Conedera, L. Salvagnac, N. Fabre et al.: Surface micromachining technology with two
SU-8 structural layers and sol-gel, SU-8 or SiO2/sol-gel sacrificial layers, J. Micromech.
Microeng. 17, N52–N57 (2007)
79. A. Liotard, F. Zamkotsian, V. Conedera et al.: Polymer-based micro deformable mirror for
adaptive optics. Proceedings of SPIE. The International Society for Optical Engineering,
San Jose, CA, p. 61130 (2006)
80. S. Mouaziz, G. Boero, R.S. Popovic et al.: Polymer-based cantilevers with integrated
electrodes, J. Microelectromech. Syst. 15, 890–895 (2006)
81. N.T. Nguyen, S.S. Ho, C.L.N. Low: A polymeric microgripper with integrated thermal
actuators, J. Micromech. Microeng. 14, 969–974 (2004)
82. M.C. Cheng, A.P. Gadre, J.A. Garra et al.: Dry release of polymer structures with anti-
sticking layer, J. Vac. Sci. Technol. A 22, 837–841 (2004)
83. D. Haefliger, A. Boisen: Three-dimensional microfabrication in negative resist using printed
masks, J. Micromech. Microeng. 16, 951–957 (2006)
84. M. Agirregabiria, F.J. Blanco, J. Berganzo et al.: Fabrication of SU-8 multilayer microstruc-
tures based on successive CMOS compatible adhesive bonding and releasing steps, Lab Chip
5, 545–552 (2005)
85. Z.C. Peng, Z.G. Ling, M. Tondra et al.: CMOS compatible integration of three-dimensional
microfluidic systems based on low-temperature transfer of SU-8 films, J. Microelectromech.
Syst. 15, 708–716 (2006)
86. P. Abgrall, C. Lattes, V. Conederal et al.: A novel fabrication method of flexible and mono-
lithic 3D microfluidic structures using lamination of SU-8 films, J. Micromech. Microeng.
16, 113–121 (2006)
87. B.J. Kim, M. Liebau, J. Huskens et al.: A self-assembled monolayer-assisted surface
microfabrication and release technique, Microelectron. Eng. 57–58, 755–760 (2001)
88. G.M. Kim, B. Kim, M. Liebau et al.: Surface modification with self-assembled monolayers
for nanoscale replication of photoplastic MEMS, J. Microelectromech. Syst. 11, 175–181
(2002)
89. D.J. Strike, G.C. Fiaccabrino, M. Koudelka-Hep et al.: Enzymatic microreactor using Si,
glass and EPON SU-8, Biomed. Microdev. 2, 175 (2000)
90. J. West, B. Karamata, B. Lillis et al.: Application of magnetohydrodynamic actuation to
continuous flow chemistry, Lab Chip 2, 224–230 (2002)
91. Gersborg-M. Hansen, A. Kristensen: Optofluidic third order distributed feedback dye laser,
Appl. Phys. Lett. 89 (2006) (article number 103518)
92. B. Bilenberg, T. Nielsen, B. Clausen et al.: PMMA to SU-8 bonding for polymer based
lab-on-a-chip systems with integrated optics, J. Micromech. Microeng. 14, 814–818 (2004)
93. E.W. Simoes, R. Furlan, R.E.B. Leminski et al.: Microfluidic oscillator for gas flow control
and measurement, Flow Meas. Instrum. 16, 7–12 (2005)
94. K.B. Mogensen, J. El-Ali, A. Wolff et al.: Integration of polymer waveguides for optical
detection in microfabricated chemical analysis systems, Appl. Opt. 42, 4072–4079 (2003)
95. Y.M. Huang, M. Uppalapati, W.O. Hancock et al.: Microfabricated capped channels for
biomolecular motor-based transport, IEEE Trans. Adv. Packaging 28, 564–570 (2005)
4 Additive Processes for Polymeric Materials 255
96. S. Arscott, P. Mounaix, D. Lippens: Substrate transfer process for InP-based heterostructure
barrier varactor devices, J. Vac. Sci. Technol. B 18, 150–155 (2000)
97. C.T. Pan, H. Yang, S.C. Shen et al.: A low-temperature wafer bonding technique using
patternable materials, J. Micromech. Microeng. 12, 611–615 (2002)
98. F.J. Blanco, M. Agirregabiria, J. Garcia et al.: Novel three-dimensional embedded SU-
8 microchannels fabricated using a low temperature full wafer adhesive bonding, J.
Micromech. Microeng. 14, 1047–1056 (2004)
99. P. Svasek, E. Svasek, B. Lendl et al.: Fabrication of miniaturized fluidic devices using SU-8
based lithography and low temperature wafer bonding, Sens. Act. A Phys. 115, 591–599
(2004)
100. S. Li, C.B. Freidhoff, R.M. Young et al.: Fabrication of micronozzles using low-temperature
wafer-level bonding with SU-8, J. Micromech. Microeng. 13, 732–738 (2003)
101. S. Tuomikoski, S. Franssila: Wafer-level bonding of MEMS structures with SU-8 epoxy
photoresist, Phys. Scr. T114, 223–226 (2004)
102. A. Heeren, C.P. Luo, G. Roth et al.: Diffusion along microfluidic channels, Microelectron.
Eng. 83, 1669–1672 (2006)
103. L. Cui, T. Zhang, H. Morgan: Optical particle detection integrated in a dielectrophoretic
lab-on-a-chip, J. Micromech. Microeng. 12, 7–12 (2002)
104. B. Helbo, A. Kristensen, A. Menon: A micro-cavity fluidic dye laser, J. Micromech.
Microeng. 13, 307–311 (2003)
105. J. Carlier, S. Arscott, V. Thomy et al.: Integrated microfluidics based on multi-layered SU-8
for mass spectrometry analysis, J. Micromech. Microeng. 14, 619–624 (2004)
106. Y.T. Chen, D. Lee: A bonding technique using hydrophilic SU-8, J. Micromech. Microeng.
17, 1978–1984 (2007)
107. S. Charlot, A.M. Gue, J. Tasselli et al.: A low cost and hybrid technology for integrating
silicon sensors or actuators in polymer microfluidic systems, J. Micromech. Microeng. 18
(2008) (article number 017003)
108. J.D.L. Shapley, D.A. Barrow: Novel patterning method for the electrochemical production
of etched silicon, Thin Solid Films 388, 134–137 (2001)
109. M. Aktary, M.O. Jensen, K.L. Westra et al.: High-resolution pattern generation using the
epoxy novolak SU-8 2000 resist by electron beam lithography, J. Vac. Sci. Technol. B 21,
L5–L7 (2003)
110. J. Zhang, M.B. Chan-Park, S.R. Conner: Effect of exposure dose on the replication
fidelity and profile of very high aspect ratio microchannels in SU-8, Lab Chip 4,
646–653 (2004)
111. M. Gaudet, J.C. Camart, L. Buchaillot et al.: Variation of absorption coefficient and deter-
mination of critical dose of SU-8 at 365 nm, Appl. Phys. Lett. 88 (2006) (article number
024107)
112. B. Eyre, J. Blosiu, D. Wiberg: Taguchi optimization for the processing of epon SU-8
resist. Proceedings of the IEEE Microelectromechanical Systems Conference, Heidelberg,
Germany, pp. 218–222 (1998)
113. Ling Z-G, K. Lian, L. Jian: Improved patterning quality of SU-8 microstructures by optimiz-
ing the exposure parameters. Proceedings of SPIE – The International Society for Optical
Engineering, Santa Clara, CA, pp. 1019–1027 (2000)
114. J.D. Williams, W. Wang: Using megasonic development of SU-8 to yield ultra-high aspect
ratio microstructures with UV lithography, Microsyst. Technol. Micro Nanosyst. Inf. Storage
Process. Syst. 10, 694–698 (2004)
115. D. Bachmann, B. Schoberle, S. Kuhne et al.: Fabrication and characterization of folded SU-8
suspensions for MEMS applications, Sens. Act. A Phys. 130, 379–386 (2006)
116. H. Lorenz, M. Laudon, P. Renaud: Mechanical characterization of a new high-aspect-ratio
near UV-photoresist, Microelectron. Eng. 41–42, 371–374 (1998)
117. D. Sameoto, S.H. Tsang, I.G. Foulds et al.: Control of the out-of-plane curvature in SU-8
compliant microstructures by exposure dose and baking times, J. Micromech. Microeng. 17,
1093–1098 (2007)
256 E. Meng et al.
118. R. Ruhmann, G. Ahrens, A. Schuetz et al.: Reduction of internal stress in a SU-8-like nega-
tive tone photoresist for MEMS applications by chemical modification. Proceedings of SPIE
– The International Society for Optical Engineering, Santa Clara, CA, pp. 502–510 (2001)
119. R. Lo, E. Meng: Integrated and reusable in-plane microfluidic interconnects, Sens. Act. B:
Chem. 132, 531–539 (2008)
120. P. Abgrall, A.M. Gue: Lab-on-chip technologies: making a microfluidic network and cou-
pling it into a complete microsystem – a review, J. Micromech. Microeng. 17, R15–R49
(2007)
121. P. Mali, A. Sarkar, R. Lal: Facile fabrication of microfluidic systems using electron beam
lithography, Lab Chip 6, 310–315 (2006)
122. J. Xie, Q. He, Y.-C. Tai et al.: Integrated electrospray chip for mass spectrometry. MicroTAS,
Nara, Japan, pp. 709–711 (2002)
123. P.Y. Li, J. Shih, R. Lo et al.: An electrochemical intraocular drug delivery device, Sens. Act.
A Phys. 143, 41–48 (2008)
124. E. L’Hostis, P.E. Michel, G.C. Fiaccabrino et al.: Microreactor and electrochemical detectors
fabricated using Si and EPON SU-8, Sens. Act. B Chem. 64, 156–162 (2000)
125. S. Matsumoto, Y.C. Tai: A nL/min-scale valveless flow regulator for integrated micro
chemical devices, JSME Int. J. Ser. B – Fluids Therm. Eng. 47, 528–533 (2004)
126. L.-Y. Chang, P.-Y. Li, L. Zhao et al.: Integrated flow sensing for focal biochemical stimula-
tion. Proceedings of the 3rd IEEE International Conference on Nano/Micro Engineered and
Molecular Systems, NEMS, Sanya, China, pp. 921–926 (2008)
127. J.H. Park, Y.K. Yoon, S.O. Choi et al.: Tapered conical polymer microneedles fabricated
using an integrated lens t echnique for transdermal drug delivery, IEEE Trans. Biomed. Eng.
54, 903–913 (2007)
128. S. Rajaraman, S.O. Choi, R.H. Shafer et al.: Microfabrication technologies for a coupled
three-dimensional microelectrode, microfluidic array, J. Micromech. Microeng. 17, 163–171
(2007)
129. R.R. LeVier, M.C. Harrison, R.R. Cook et al.: What is silicone? J. Clin. Epidemiol. 48,
513–517 (1995)
130. M.M.G. Antonisse, J.F.J. Engbersen, D.N. Reinhoudt: Nitrate and Bicarbonate Selective
CHEMFETs. Proceedings of the 8th International Conference on Solid-State Sensors and
Actuators, and Eurosensors IX. Transducers, Stockholm, Sweden, pp. 867–869 (1995)
131. J.C. Lotters, W. Olthuis, P.H. Veltink et al.: Polydimethylsiloxane as an elastic material
applied in a capacitive accelerometer, J. Micromech. Microeng. 6, 52–54 (1996)
132. Z. Chu: Flexible package for a tactile sensor array. Proceedings of the 1996 National Sensor
Conference, Delft, The Netherlands (1996)
133. R.E.G.V. Hal: Advanced Packaging of ISFETs, Design, Encapsulation and Bonding,
University of Twente (1994)
134. D.J. Campbell, K.J. B eckman, C.E. Calderon et al.: Replication and compres-
sion of bulk surface structures with polydimethylsiloxane elastomer, J. Chem. Educ.
75, 537–541 (1999)
135. S.J. Clarson, J.A. Semlyen: Siloxane Polymers (Prentice Hall, Englewood Cliffs, NJ, 1993)
136. J.C. Lotters, W. Olthuis, P.H. Veltink et al.: The mechanical properties of the rubber elastic
polymer polydimethylsiloxane for sensor applications, J. Micromech. Microeng. 7, 145–147
(1997)
137. ABCR: Research Chemicals and Metals Catalogue (ABCR, Karlsruhe, Germany, 1994)
138. J.C. Salamone: Polymeric Materials Encyclopedia (CRC Press, Rochester, NY, 1996)
139. D.W. van Krevelen, P.J. Hoftyzer: Properties of Polymers, Their Estimation and Correlation
with Chemical Structure (Elsevier Scientific, Amsterdam, 1976)
140. J.E. Mark: Polymer Data Handbook (Oxford University Press, New York, NY, 1999)
141. J. Garra, T. Long, J. Currie et al.: Dry etching of polydimethylsiloxane for microfluidic
systems, J. Vac. Sci. Technol. A Vac. Surf. Films 20, 975–982 (2002)
4 Additive Processes for Polymeric Materials 257
142. D. Armani, C. Liu, N. Aluru: Re-configurable fluid circuits by PDMS elastomer microma-
chining. Proceedings of IEEE, Micro Electro Mechanical Systems, Orlando, FL (1999)
143. M.C. Belanger, Y. Marois: Hemocompatibility, biocompatibility, inflammatory and in vivo
studies of primary reference materials low-density polyethylene and polydimethylsiloxane:
A review, J. Biomed. Mater. Res. 58, 467–477 (2001)
144. Y. Zhao, X. Zhang: Adaptation of flexible polymer fabrication to cellular mechanics study,
Appl. Phys. Lett. 87 (2005) (article number 14410)
145. L.J. Lee: Polymer nanoengineering for biomedical applications, Ann. Biomed. Eng. 34,
75–88 (2006)
146. A. Mata, A.J. Fleischman, S. Roy: Characterization of polydimethylsiloxane (PDMS)
properties for biomedical micro/nanosystems, Biomed. Microdev. 7, 281–293 (2005)
147. M.R. VanLandingham, N.K. Chang, P.L. Drzal et al.: Viscoelastic characterization of poly-
mers using instrumented indentation. I. Quasi-static testing, J. Polym. Sci. B Polym. Phys.
43, 1794–1811 (2005)
148. C.C. White, M.R. Vanlandingham, P.L. Drzal et al.: Viscoelastic characterization of poly-
mers using instrumented indentation. II. Dynamic testing, J. Polym. Sci. B Polym. Phys. 43,
1812–1824 (2005)
149. K.P. Menard: Dynamic Mechanical Analysis (CRC Press, Boca Raton, FL, 1999)
150. A. Chakravartula, K. Komvopoulos: Viscoelastic properties of polymer surfaces investigated
by nanoscale dynamic mechanical analysis, Appl. Phys. Lett. 88 (2006) (article number
131901)
151. L. Cheng, X. Xia, W. Yu et al.: Flat-punch indentation of viscoelastic material, J. Polym.
Sci. B Polym. Phys. 38, 10–22 (2000)
152. W.G. Knauss, W. Zhu: Nonlinearly viscoelastic behavior of polycarbonate. I. Response
under pure shear, Mech. Time-Depend. Mater. 6, 231–269 (2002)
153. I.K. Lin, Y.M. Liao, Y. Liu et al.: Viscoelastic mechanical behavior of soft microcantilever-
based force sensors, Appl. Phys. Lett. 93 (2008) (article number 251907)
154. M. Akay, S.N. Rollins, E. Riordan: Mechanical-behavior of sequential polyurethane
poly(methyl methacrylate) interpenetrating polymer networks, Polymer 29, 37–42 (1988)
155. M. Wollerdorfer, H. Bader: Influence of natural fibres on the mechanical properties of
biodegradable polymers, Ind. Crops Prod. 8, 105–112 (1998)
156. L.A. Majewski, M. Grell, S.D. Ogier et al.: A novel gate insulator for flexible electronics,
Org. Electron. 4, 27–32 (2003)
157. Y.N. Xia, J.J. McClelland, R. Gupta et al.: Replica molding using polymeric materials: A
practical step toward nanomanufacturing, Adv. Mater. 9, 147–149 (1997)
158. Patternable Silicones for Electronics, Product Data Sheet, Dow Corning, http://www.
dowcorning.com/content/etronics/etronicspattern/
159. Product information for Cyclotene, Dow Chemical, http://www.dow.com/cyclotene/index.
htm
160. W.S. Kim, R. Houbertz, T.H. Lee et al.: Effect of photoinitiator on photopolymerization of
inorganic-organic hybrid polymers (ORMOCER (R)), J. Polym. Sci. B Polym. Phys. 42,
1979–1986 (2004)
161. J.H. Ward, R. Bashir, N.A. Peppas: Micropatterning of biomedical polymer surfaces by
novel UV polymerization techniques, J. Biomed. Mater. Res. 56, 351–360 (2001)
162. A.A.S. Bhagat, P. Jothimuthu, I. Papautsky: Photodefinable polydimethylsiloxane (PDMS)
for rapid lab-on-a-chip prototyping, Lab Chip 7, 1192–1197 (2007)
163. H.L. Cong, T.R. Pan: Photopatternable conductive PDMS materials for microfabrication,
Adv. Funct. Mater. 18, 1912–1921 (2008)
164. K. Tsougeni, A. Tserepi, E. Gogolides: Photosensitive poly(dimethylsiloxane) materials for
microfluidic applications, Microelectron. Eng. 84, 1104–1108 (2007)
165. A. Kumar, G.M. Whitesides: Features of gold having micrometer to centimeter dimen-
sions can be formed through a combination of stamping with an elastomeric stamp and
an alkanethiol ink followed by chemical etching, Appl. Phys. Lett. 63, 2002–2004 (1993)
258 E. Meng et al.
166. R.E. Kirk, D.F. Othmer, J.I. Kroschwitz et al.: Encyclopedia of Chemical Technology (Wiley,
New York, NY, 2007)
167. T.E. Creighton: Proteins: Structures and Molecular Properties (W.H. Freeman, New York,
NY, 1993)
168. Y.N. Xia, G.M. Whitesides: Soft lithography, Angew. Chem. Int. Ed. 37, 551–575 (1998)
169. W. Sanger: Principles of Nucleic Acid Structure (Springer, New York, NY, 1986)
170. H. Ringsdorf, B. Schlarb, J. Venzmer: Molecular architecture and function of polymeric
oriented systems – models for the study of organization, surface recognition, and dynamics
of biomembranes, Angew. Chem. Int. Ed. Engl. 27, 113–158 (1988)
171. B.C. Wheeler, J.M. Corey, G.J. Brewer et al.: Microcontact printing for precise control of
nerve cell growth in culture, J. Biomech. Eng. Trans. ASME 121, 73–78 (1999)
172. A. Bernard, J.P. Renault, B. Michel et al.: Microcontact printing of proteins, Adv. Mater. 12,
1067–1070 (2000)
173. D.J. Beebe, G.A. Mensing, Walker GM: Physics and applications of microfluidics in biology,
Annu. Rev. Biomed. Eng. 4, 261–286 (2002)
174. S.C. Jakeway, A.J. de Mello, E.L. Russell: Miniaturized total analysis systems for biological
analysis, Fresenius J. Anal. Chem. 366, 525–539 (2000)
175. Y.H. Kim, K.S. Shin, J.Y. Kang et al.: Poly(dimethylsiloxane)-based packaging technique
for microchip fluorescence detection system applications, J. Microelectromech. Syst. 15,
1152–1158 (2006)
176. K. Hosokawa, K. Sato, N. Ichikawa et al.: Power-free poly(dimethylsiloxane) microfluidic
devices for gold nanoparticle-based DNA analysis, Lab Chip 4, 181–185 (2004)
177. D.A. Bartholomeusz, R.W. Boutte, J.D. Andrade: Xurography: Rapid prototyping of
microstructures using a cutting plotter, J. Microelectromech. Syst. 14, 1364–1374
(2005)
178. M.A. Eddings, B.K. Gale: A PDMS-based gas permeation pump for on-chip fluid handling
in microfluidic devices, J. Micromech. Microeng. 16, 2396–2402 (2006)
179. K. Morishima, Y. Tanaka, K. Sato et al.: Bioactuated microsystem using cultured cardiomy-
ocytes. Proceedings of the MicroTotal Analysis Systems, Squaw Valley, CA, pp. 1125–1128
(2003)
180. Y. Tanaka, K. Morishima, T. Shimizu et al.: Demonstration of a PDMS-based bio-
microactuator using cultured cardiomyocytes to drive polymer micropillars, Lab Chip 6,
230–235 (2006)
181. Y. Zhao, C.C. Lim, D.B. Sawyer et al.: Cellular force measurements using single-spaced
polymeric microstructures: Isolating cells from base substrate, J. Micromech. Microeng. 15,
1649–1656 (2005)
182. Y. Zhao, C.C. Lim, D.B. Sawyer et al.: Microchip for subcellular mechanics study in living
cells, Sens. Act. B Chem. 114, 1108–1115 (2006)
183. M.T. Yang, N.J. Sniadecki, C.S. Chen: Geometric considerations of micro- to nanoscale
elastomeric post arrays to study cellular traction forces, Adv. Mater. 19, 3119–3123 (2007)
184. J.L. Tan, J. Tien, D.M. Pirone et al.: Cells lying on a bed of microneedles: An approach to
isolate mechanical force, Proc. Natl Acad. Sci. USA. 100, 1484–1489 (2003)
185. I.K. Lin, Y.M. Liao, K.S. Chen et al.: Viscoelastic characterization of soft micropillars
for cellular mechanics study. 12th International Conference on Miniaturized Systems for
Chemistry and Life Sciences, San Diego, CA (2008)
186. M.S. Kolodney, R,B, Wysolmerski: Isometric contraction by fibroblasts and endothelial-cells
in tissue-culture – a quantitative study, J. Cell Biol. 117, 73–82 (1992)
187. O. Cazorla, Y.M. Wu, T.C. Irving et al.: Titin-based modulation of calcium sensitivity of
active tension in mouse skinned cardiac myocytes, Circ. Res. 88, 1028–1035 (2001)
188. K. Visscher, M.J. Schnitzer, S.M. Block: Single kinesin molecules studied with a molecular
force clamp, Nature 400, 184–189 (1999)
189. L.H. Opie: The Heart Physiology: From Cell to Circulation (Lippincott-Raven, Philadelphia,
PA, 1998)
4 Additive Processes for Polymeric Materials 259
190. K. Sato, S. Harada, A. Saiki et al.: Novel planar multilevel interconnection technology uti-
lizing polyimide. IEEE Transactions on Parts Hybrids and Packaging PHP9, pp. 176–180
(1973)
191. K. Mukai, A. Saiki, K. Yamanaka et al.: Planar multilevel interconnection technology
employing a polyimide, IEEE J. Solid-State Circuits 13, 462–467 (1978)
192. A.M. Wilson: Polyimide insulators for multilevel interconnections, Thin Solid Films 83,
145–163 (1981)
193. S. Sasaki, T. Kon, T. Ohsaki et al.: A new multichip module using a copper polyimide
multilayer substrate, IEEE Trans. Compon. Hybrids Manuf. Technol. 12, 658–662 (1989)
194. M. Gad-el-Hak: MEMS: Design and Fabrication (CRC/Taylor & Francis, Boca Raton, FL,
2006)
195. P.W. Barth, S.L. Bernard, J.B. Angell: Flexible circuit and sensor arrays fabricated by
monolithic silicon technology, IEEE Trans. Electron Dev. 32, 1202–1205 (1985)
196. S.A. Shamma-Donoghue, G.A. May, N.E. Cotter et al.: Thin-film multielectrode arrays for
a cochlear prosthesis, IEEE Trans. Electron Dev. 29, 136–144 (1982)
197. R.L. White, L.A. Roberts, O. Kwon et al.: Thin-film electrodes for an artificial ear, J. Vac.
Sci. Technol. A Vac. Surf. Films 1, 287–295 (1983)
198. A.B. Frazier: Recent applications of polyimide to micromachining technology, IEEE Trans.
Ind. Electron. 42, 442–448 (1995)
199. A.B. Frazier, C.H. Ahn, M.G. Allen: Development of micromachined devices using
polyimide-based processes, Sens. Act. A Phys. 45, 47–55 (1994)
200. M. Pedersen, W. Olthuis, P. Bergveld: High-performance condenser microphone with fully
integrated CMOS amplifier and DC-DC voltage converter, J. Microelectromech. Syst. 7,
387–394 (1998)
201. T. Stieglitz: Flexible biomedical microdevices with double-sided electrode arrangements for
neural applications, Sens. Act. A Phys. 90, 203–211 (2001)
202. P.J. Rousche, D.S. Pellinen, D.P. Pivin et al.: Flexible polyimide-based intracortical electrode
arrays with bioactive capability, IEEE Trans. Biomed. Eng. 48, 361–371 (2001)
203. N. Lago, K. Yoshida, K.P. Koch et al.: Assessment of biocompatibility of chronically
implanted polyimide and platinum intrafascicular electrodes, IEEE Trans. Biomed. Eng. 54,
281–290 (2007)
204. D.C. Rodger, A.J. Fong, L. Wen et al.: Flexible parylene-based multielectrode array tech-
nology for high-density neural stimulation and recording, Sens. Act. B Chem. 132, 449–460
(2008)
205. D.C. Rodger, J.D. Weiland, M.S. Humayun et al.: Scalable high lead-count parylene package
for retinal prostheses, Sens. Act. B Chem. 117, 107–114 (2006)
206. D. Bhusari, H.A. Reed, M. Wedlake et al.: Fabrication of air-channel structures for microflu-
idic, microelectromechanical, and microelectronic applications, J. Microelectromech. Syst.
10, 400–408 (2001)
207. A.B. Frazier, M.G. Allen: Metallic microstructures fabricated using photosensitive poly-
imide electroplating molds, J. Microelectromech. Syst. 2, 87–94 (1993)
208. A. Bagolini, L. Pakula, T.L.M. Scholtes et al.: Polyimide sacrificial layer and novel materials
for post-processing surface micromachining, J. Micromech. Microeng. 12, 385–389 (2002)
209. Y.J. Kim, M.G. Allen: In situ measurement of mechanical properties of polyimide films
using micromachined resonant string structures, IEEE Trans. Compon. Packaging Technol.
22, 282–290 (1999)
210. A.B. Frazier, M.G. Allen: Piezoresistive graphite polyimide thin-films for micromachining
applications, J. Appl. Phys. 73, 4428–4433 (1993)
211. D. Memmi, V. Foglietti, E. Cianci et al.: Fabrication of capacitive micromechanical
ultrasonic transducers by low-temperature process, Sens. Act. A Phys. 99, 85–91 (2002)
212. M. Eray, N.S. Dogan, L.J. Liu et al.: Highly stable bilayer-lipid membranes (blms) formed
on microfabricated polyimide apertures, Biosens. Bioelectron. 9, 343–351 (1994)
213. K. Minami, H. Morishita, M. Esashi: A bellows-shape electrostatic microactuator, Sens. Act.
A Phys. 72, 269–276 (1999)
260 E. Meng et al.
214. L.S. Pakula, H. Yang, H.T.M. Pham et al.: Fabrication of a CMOS compatible pressure
sensor for harsh environments, J. Micromech. Microeng. 14, 1478–1483 (2004)
215. M.A. Schmidt, R.T. Howe, S.D. Senturia et al.: Design and calibration of a microfabricated
floating-element shear-stress sensor, IEEE Trans. Electron Dev. 35, 750–757 (1988)
216. P.J. Schubert, J.H. Nevin: A polyimide-based capacitive humidity sensor, IEEE Trans.
Electron Dev. 32, 1220–1223 (1985)
217. R. Selvaraj, H.T. Lin, J.F. McDonald: Integrated optical wave-guides in polyimide for wafer
scale integration, J. Lightw. Technol. 6, 1034–1044 (1988)
218. Y.W. Kim, M.G. Allen: Single-layer and multilayer surface-micromachined platforms using
electroplated sacrificial layers, Sens. Act. A Phys. 35, 61–68 (1992)
219. T. Stieglitz, H. Beutel, J.U. Meyer: A flexible, light-weight multichannel sieve electrode
with integrated cables for interfacing regenerating peripheral nerves, Sens. Act. A Phys. 60,
240–243 (1997)
220. G. Turban, M. Rapeaux: Dry etching of polyimide in O2-Cf4 and O2-Sf6 plasmas, J.
Electrochem. Soc. 130, 2231–2236 (1983)
221. U. Buder, J.P. von Klitzing, E. Obermeier: Reactive ion etching for bulk structuring of
polyimide, Sens. Act. A Phys. 132, 393–399 (2006)
222. C.H. Ahn, Y.J. Kim, M.G. Allen: A Fully Integrated planar toroidal inductor with a micro-
machined nickel iron magnetic bar, IEEE Trans. Compon. Packaging Manuf. Technol. A 17,
463–469 (1994)
223. T. Stieglitz, H.H. Ruf, M. Gross et al.: A biohybrid system to interface peripheral nerves
after traumatic lesions: Design of a high channel sieve electrode, Biosens. Bioelectron. 17,
685–696 (2002)
224. J.W. Suh, S.F. Glander, R.B. Darling et al.: Organic thermal and electrostatic ciliary
microactuator array for object manipulation, Sens. Act. A Phys. 58, 51–60 (1997)
225. C.W. Jurgensen, E.S.G. Shaqfeh: Factors controlling the etching rate and etching profile in
the O-2 reactive ion etching pattern transfer step in multilevel lithography, Polym. Eng. Sci.
29, 878–881 (1989)
226. J.K. Singh, A. Roybardhan, H.S. Kothari et al.: Dependence of process parameters on pla-
narization isolation and etching of sloped vias in polyimides for GaAs ICs, Proc. IEEE 75,
850–852 (1987)
227. F.D. Egitto, F. Emmi, R.S. Horwath et al.: Plasma-etching of organic materials.1. Polyimide
in O2-Cf4, J. Vac. Sci. Technol. B 3, 893–904 (1985)
228. W.H. Juan, S.W. Pang: High-aspect-ratio polyimide etching using an oxygen plasma
generated by electron-cyclotron-resonance source, J. Vac. Sci. Technol. B 12, 422–426
(1994)
229. R. Pethig, J.P.H. Burt, A. Parton et al.: Development of biofactory-on-a-chip technology
using excimer laser micromachining, J. Micromech. Microeng. 8, 57–63 (1998)
230. P.M. Martin, D.W. Matson, W.D. Bennett et al.: Laminated plastic microfluidic components
for biological and chemical systems, J. Vac. Sci. Technol. A Vac. Surf. Films 17, 2264–2269
(1999)
231. C.T. Pan: Perpendicular magnetic anisotropic field for polyimide-based microactuator with
excimer laser ablation, Sens. Act. A Phys. 113, 240–247 (2004)
232. A. Schwarz, J.S. Rossier, E. Roulet et al.: Micropatterning of biomolecules on polymer
substrates, Langmuir 14, 5526–5531 (1998)
233. M. Gross, D. Altpeter, T. Stieglitz et al.: Micromachining of flexible neural
implants with low-ohmic wire traces using electroplating, Sens. Act. A Phys. 96,
105–110 (2002)
234. T. Schanze, L. Hesse, C. Lau et al.: An optically powered single-channel stimulation implant
as test-system for chronic biocompatibility and biostability of miniaturized retinal vision
prostheses, IEEE Trans. Biomed. Eng. 54, 983–992 (2007)
235. J. Engel, J. Chen, C. Liu: Development of polyimide flexible tactile sensor skin, J.
Micromech. Microeng. 13, 359–366 (2003)
4 Additive Processes for Polymeric Materials 261
236. M. Pedersen, M.G.H. Meijerink, W. Olthuis et al.: An IC-compatible polyimide pressure
sensor with capacitive readout, Sens. Act. A Phys. 63, 163–168 (1997)
237. M. Pedersen, W. Olthuis, P. Bergveld: A silicon condenser microphone with polyimide
diaphragm and backplate, Sens. Act. A Phys. 63, 97–104 (1997)
238. S. Metz, A. Bertsch, D. Bertrand et al.: Flexible polyimide probes with microelectrodes
and embedded microfluidic channels for simultaneous drug delivery and multi-channel
monitoring of bioelectric activity, Biosens. Bioelectron. 19, 1309–1318 (2004)
239. M.H. Li, J.J. Wu, Y.B. Gianchandani: Surface micromachined polyimide scanning thermo-
couple probes, J. Microelectromech. Syst. 10, 3–9 (2001)
240. S. McNamara, A.S. Basu, J. Lee et al.: Ultracompliant thermal probe array for scanning
non-planar surfaces without force feedback, J. Micromech. Microeng. 15, 237–243 (2005)
241. A. Bayrashev, B. Ziaie: Silicon wafer bonding through RF dielectric heating, Sens. Act.
A Phys. 103, 16–22 (2003)
242. R. Nayve, M. Fujii, A. Fukugawa et al.: High-resolution long-array thermal ink jet print-
head fabricated by anisotropic wet etching and deep Si RIE, J. Microelectromech. Syst. 13,
814–821 (2004)
243. M. Pedersen, W. Olthuis, P. Bergveld: Development and fabrication of capacitive sensors in
polyimide, Sens. Mater. 10, 1–20 (1998)
244. Y. Nakamura, Y. Suzuki, Y. Watanabe: Effect of oxygen plasma etching on adhesion between
polyimide films and metal, Thin Solid Films 291, 367–369 (1996)
245. K. Suzuki, H. Yamada, H. Miura et al.: Self-assembly of three dimensional micro mech-
anisms using thermal shrinkage of polyimide, Microsyst. Technol. Micro Nanosyst. Inf.
Storage Process. Syst. 13, 1047–1053 (2007)
246. T. Ebefors, E. Kalvesten, G. Stemme: New small radius joints based on thermal shrink-
age of polyimide in V-grooves for robust self-assembly 3D microstructures, J. Micromech.
Microeng. 8, 188–194 (1998)
247. T. Ebefors, J.U. Mattsson, E. Kalvesten et al.: A robust micro conveyer realized by arrayed
polyimide joint actuators, J. Micromech. Microeng. 10, 337–349 (2000)
248. M. Gel, I. Shimoyama: Parallel-plate electrostatic actuation with vertical hinges,
J. Micromech. Microeng. 11, 555–560 (2001)
249. M. Gel, S. Takeuchi, I. Shimoyama: Fabrication method for out-of-plane, micro-coil by
surface micromachining, Sens. Act. A Phys. 97–98, 702–708 (2002)
250. H. Miyajima, N. Asaoka, M. Arima et al.: A durable, shock-resistant electromagnetic optical
scanner with polyimide-based hinges, J. Microelectromech. Syst. 10, 418–424 (2001)
251. J. Chen, C. Liu: Development and characterization of surface micromachined, out-of-plane
hot-wire anemometer, J. Microelectromech. Syst. 12, 979–988 (2003)
252. T.E. Creighton: Proteins: Structures and Molecular Properties (W.H. Freeman, New York,
NY, 1993)
253. A. Veis: The Macromolecular Chemistry of Gelatin (Academic, New York, NY, 1964)
254. M. Djabourov, J. Leblond, P. Papon: Gelation of aqueous gelatin solutions. 1. Structural
investigation, J. Phys. 49, 319–332 (1988)
255. C. Michon, G. Cuvelier, P. Relkin et al.: Influence of thermal history on the stability of
gelatin gels, Int. J. Biol. Macromol. 20, 259–264 (1997)
256. J.Y. Chatellier, D. Durand, J.R. Emery: Critical helix content in gelatin gels, Int. J. Biol.
Macromol. 7, 311–314 (1985)
257. I. Pezron, M. Djabourov, J. Leblond: Conformation of gelatin chains in aqueous-solutions.
1. A light and small-angle neutron-scattering study, Polymer 32, 3201–3210 (1991)
258. A. Bigi, G. Cojazzi, S. Panzavolta et al.: Mechanical and thermal properties of gelatin films
at different degrees of glutaraldehyde crosslinking, Biomaterials 22, 763–768 (2001)
259. P.V. Kozlov, G.I. Burdygina: The structure and properties of solid gelatin and the principles
of their modification, Polymer 24, 651–666 (1983)
260. L.J. Yang, W.Z. Lin, T.J. Yao et al.: Photo-patternable gelatin as protection layers in low-
temperature surface micromachinings, Sens. Act. A Phys. 103, 284–290 (2003)
262 E. Meng et al.
261. J.C. Angus, U. Landau, S.H. Liao et al.: Controlled electroplating through gelatin films,
J. Electrochem. Soc. 133, 1152–1160 (1986)
262. R. Fernandes, H.M. Yi, L.Q. Wu et al.: Thermo-biolithography: A technique for patterning
nucleic acids and proteins, Langmuir 20, 906–913 (2004)
263. L.J. Yang, Y.C. Ou: The micro patterning of glutaraldehyde (GA)-crosslinked gelatin and its
application to cell-culture, Lab Chip 5, 979–984 (2005)
264. P.M. Neumann, B. Zur, Y. Ehrenreich: Gelatin-based sprayable foam as a skin substitute, J.
Biomed. Mater. Res. 15, 9–18 (1981)
265. L.H.H. Olde Damink, P.J. Dijkstra, M.J.A. Vanluyn et al.: Glutaraldehyde as a cross-linking
agent for collagen-based biomaterials, J . Mater. Sci. Mater. Med. 6, 460–472 (1995)
266. D.P. Speer, M. Chvapil, C.D. Eskelson et al.: Biological effects of residual glutaraldehyde in
glutaraldehyde-tanned collagen biomaterials, J. Biomed. Mater. Res. 14, 753–764 (1980)
267. Y.S. Choi, S.R. Hong, Y.M. Lee et al.: Studies on gelatin-containing artificial skin: II.
Preparation and characterization of cross-linked gelatin-hyaluronate sponge, J. Biomed.
Mater. Res. 48, 631–639 (1999)
268. J.P. Draye, B. Delaey, A. Van de Voorde et al.: In vitro and in vivo biocompatibility of
dextran dialdehyde cross-linked gelatin hydrogel films, Biomaterials 19, 1677–1687 (1998)
269. W.H. Chang, Y. Chang, P.H. Lai et al.: A genipin-crosslinked gelatin membrane as wound-
dressing material: in vitro and in vivo studies, J. Biomater. Sci. Polym. Ed. 14, 481–495
(2003)
270. L.T. Lim, Y. Mine, M.A. Tung: Barrier and tensile properties of transglutaminase cross-
linked gelatin films as affected by relative humidity, temperature, and glycerol content, J.
Food Sci. 64, 616–622 (1999)
271. A. Mizuno, M. Mitsuiki, M. Motoki: Effect of transglutaminase treatment on the glass
transition of soy protein, J. Agric. Food Chem. 48, 3286–3291 (2000)
272. A. Paguirigan, D.J. Beebe: Gelatin based microfluidic devices for cell culture, Lab Chip 6,
407–413 (2006)
273. A.L. Paguirigan, D.J. Beebe: Protocol for the fabrication of enzymatically crosslinked
gelatin microchannels for microfluidic cell culture, Nat. Protocols 2, 1782–1788 (2007)
274. WA Little: Microminiature refrigeration, Rev. Sci. Instrum. 55, 661–680 (1984)
275. E. Ermantraut, K. Wohlfart, W. Tichelaar: Perforated support foils with pre-defined hole
size, shape and arrangement, Ultramicroscopy 74, 75–81 (1998)
276. R. Delille, M.G. Urdaneta, S.J. Moseley et al.: Benchtop polymer MEMS, J.
Microelectromech. Syst. 15, 1108–1120 (2006)
277. J.L. Tan, W. Liu, C.M. Nelson et al.: Simple approach to micropattern cells on common
culture substrates by tuning substrate wettability, Tissue Eng. 10, 865–872 (2004)
278. M.D. Tang, A.P. Golden, J. Tien: Molding of three-dimensional microstructures of gels, J.
Am. Chem. Soc. 125, 12988–12989 (2003)
279. M. Kumar: A review of chitin and chitosan applications, React. Funct. Polym. 46, 1–27
(2000)
280. L.Q. Wu, A.P. Gadre, H.M. Yi et al.: Voltage-dependent assembly of the polysaccharide
chitosan onto an electrode surface, Langmuir 18, 8620–8625 (2002)
281. L.Q. Wu, H.M. Yi, S. Li et al.: Spatially selective deposition of a reactive polysaccharide
layer onto a patterned template, Langmuir 19, 519–524 (2003)
282. T.H. Ang, F.S.A. Sultana, D.W. Hutmacher et al.: Fabrication of 3D chitosan-hydroxyapatite
scaffolds using a robotic dispensing system, Mater. Sci. Eng. C Biomim. Supramol. Syst. 20,
35–42 (2002)
283. S.T. Koev, M.A. Powers, H. Yi et al.: Mechano-transduction of DNA hybridization and
dopamine oxidation through electrodeposited chitosan network, Lab Chip 7, 103–111 (2007)
284. L.Q. Wu, M.K. McDermott, C. Zhu et al.: Mimicking biological phenol reaction cascades to
confer mechanical function, Adv. Funct. Mater. 16, 1967–1974 (2006)
285. H.M. Yi, L.Q. Wu, W.E. Bentley et al.: Biofabrication with chitosan, Biomacromolecules 6,
2881–2894 (2005)
4 Additive Processes for Polymeric Materials 263
286. K. Ono, Y. Saito, H. Yura et al.: Photocrosslinkable chitosan as a biological adhesive, J.
Biomed. Mater. Res. 49, 289–295 (2000)
287. J.M. Karp, Y. Yeo, W.L. Geng et al.: A photolithographic method to create cellular
micropatterns, Biomaterials 27, 4755–4764 (2006)
288. J.C. Cheng, A.P. Pisano: Photolithographic process for integration of the biopolymer
chitosan into micro/nano structures, J. Microelectromech. Syst. 17, 402–409 (2008)
289. L. Tan, Y.P. Kong, S.W. Pang et al.: Imprinting of polymer at low temperature and pressure,
J. Vac. Sci. Technol. B 22, 2486–2492 (2004)
290. I. Park, J. Cheng, A.P. Pisano et al.: Low temperature, low pressure nanoimprinting of
chitosan as a biomaterial for bionanotechnology applications, Appl. Phys. Lett. 90 (2007)
(article number 093902)
291. K.C. Popat, T.A. Desai: Poly(ethylene glycol) interfaces: An approach for enhanced
performance of microfluidic systems, Biosens. Bioelectron. 19, 1037–1044 (2004)
292. K.C. Popat, R.W. Johnson, T.A. Desai: Characterization of vapor deposited poly (ethylene
glycol) films on silicon surfaces for surface modification of microfluidic systems, J. Vac. Sci.
Technol. B 21, 645–654 (2003)
293. M.Q. Zhang, T. Desai, M. Ferrari: Proteins and cells on PEG immobilized silicon surfaces,
Biomaterials 19, 953–960 (1998)
294. S. Sharma, R.W. Johnson, T.A. Desai: Ultrathin poly(ethylene glycol) films for silicon-based
microdevices, Appl. Surf. Sci. 206, 218–229 (2003)
295. J.H. Lee, H.B. Lee, J.D. Andrade: Blood compatibility of polyethylene oxide surfaces, Prog.
Polym. Sci. 20, 1043–1079 (1995)
296. J.M. Harris: Poly(ethylene glycol) Chemistry: Biotechnical and Biomedical Applications
(Plenum Press, New York, NY, 1992)
297. M. Zhang, M. Ferrari: Hemocompatible polyethylene glycol films on silicon, Biomed.
Microdev. 1, 81–89 (1998)
298. M. Amiji, K. Park: Prevention of protein adsorption and platelet-adhesion on surfaces by
peo ppo peo triblock copolymers, Biomaterials 13, 682–692 (1992)
299. D. Gingell, N. Owens, P. Hodge et al.: Adsorption of a novel fluorescent derivative of a
poly(ethylene oxide)/poly(butylene oxide) block-copolymer on octadecyl glass studied by
total internal-reflection fluorescence and interferometry, J. Biomed. Mater. Res. 28, 505–513
(1994)
300. C. Maechlingstrasser, P. Dejardin, J.C. Galin et al.: Preadsorption of polymers on glass and
silica to reduce fibrinogen adsorption, J. Biomed. Mater. Res. 23, 1385–1393 (1989)
301. D. Gingell, N. Owens: Inhibition of platelet spreading from plasma onto glass by an
adsorbed layer of a novel fluorescent-labeled poly(ethylene oxide)/poly(butylene oxide)
block-copolymer – characteristics of the exclusion zone probed by means of polystyrene
beads and macromolecules, J Biomed. Mater. Res. 28, 491–503 (1994)
302. D.W. Grainger, C. Nojiri, T. Okano et al.: Invitro and exvivo platelet interactions
with hydrophilic hydrophobic poly(ethylene oxide)-polystyrene multiblock copolymers, J.
Biomed. Mater. Res. 23, 979–1005 (1989)
303. N.F. Owens, D. Gingell, P.R. Rutter: Inhibition of cell-adhesion by a synthetic-
polymer adsorbed to glass shown under defined hydrodynamic stress, J. Cell Sci. 87,
667–675 (1987)
304. M.B. Stark, K. Holmberg: Covalent immobilization of lipase in organic-solvents,
Biotechnol. Bioeng. 34, 942–950 (1989)
305. Y.C. Tseng, K. Park: Synthesis of photoreactive poly(ethylene glycol) and its application to
the prevention of surface-induced platelet activation, J. Biomed. Mater. Res. 26, 373–391
(1992)
306. M. Amiji, K. Park: Surface modification by radiation-induced grafting of Peo/Ppo/Peo
triblock copolymers, J. Colloid Interface Sci. 155, 251–255 (1993)
307. K. Emoto, J.M. Harris, J.M. VanAlstine: Grafting poly(ethylene glycol) epoxide to amino-
derivatized quartz: Effect of temperature and pH on grafting density, Anal. Chem. 68,
3751–3757 (1996)