Smith G.T. Cutting Tool Technology: Industrial Handbook

Подождите немного. Документ загружается.

In the relatively near-future, the application of

AI to the tasks involved in unmanned machining

will increase, along with potential cutting speed and

feeds. Not only will the novel cutting geometries be

dev

eloped to control chip-formation and chip-break-

ing behaviour across a much wider range of workpiece

materials than is currently available, but the tool/insert

coatings are now being ‘atomically-modied’ to create

totally new coated structures, oering considerable

‘cutting-promise’ for the future. e role of all forms

of machining-related activities will continue to grow

through out the world, as companies strive to produce

and develop products that are manufactured to: tighter

tolerances; enhanced machined surface texture; while

minimising the underlying problems of the part’s sur-

face integrity – for any ‘severe in-service’ applications

of critical components.

References

Journals and Conference Papers

Allcock, A. Hexapod Avoids Slideway Errors [Variax Kine-

matics: Non-orthogonal Machine Tool]. Machinery and

Prod. Eng’g., 20 Jan., 1995.

Aronson, R.B. Spotlight on Spindles [HSM Spindle Designs].

Manufacturing Engineering, 59–67, June, 1996.

Arndt, G. Ultra-High-Speed Machining. Annals of the CIRP,

Vol.21 (1), 3–6, 1972.

Arndt, G. Ultra-high Speed Machining: A Review and an

Analysis of Cutting Forces. Proc. Instn. Mech. Engrs.,

Vol. 187 (44), 625–633, 1973.

Ayrton, G. Safe High-speed Operation of Work Holding

Chucks [Turning Operations]. Proc. of Int. Conf. on

Industrial Tooling, Molyneux Press Ltd (London),

115–125, Sept., 2003.

Bates, C. Stop Babysitting High-speed Machines [Untended

Operation]. American Machinist, 52–56, May, 2005.

Bates, C. Cycle Time First, Tooling Second [Tooling Eco-

nomics]. American Machinist, 26–29, Jan., 2007.

Belhadi, S., Mabrouki, T., Rigal, J-F. and Boulanouar, L. Ex-

perimental and Numerical Study of Chip Formation dur-

ing Straight Turning of Hardened AISI 4340 Steel. Proc.

IMechE, Vol. 219 (Pat B), Engineering Manufacture,

515–523, 2005.

Benes, J. No High-speed Surprises [

Benets of HSM]. Ameri-

can Machinist, 58–63, May, 2005.

Benes, J. Probing the Limits of Metrology. American Ma-

chinist, 34–39, Oct. 2006.

Boogert, R.M., Kals, H.J.J. and van Houten, F.J.A.M. Tool

Paths and Cutting Technology in Computer-aided Process

Planning. Int. J. Adv. Manuf. Technol., Vol. 11, 186–197,

1996.

Breuckmann, B. and Langenbeck, P. In-process Interferom-

etry by Real Time Fringe Analysis. Micromachining Op-

tical Components and Prec. Eng’g., Proc. of SPIE 1015,

45–59, 1989.

Carius, A. and Rigby, P. PCBN Turns the Hard Stu. Cut-

ting Tool Eng’g., 24–32, June, 1995.

Cho, D-W., Lee, S.J. and Chu, C.N. e State of Machin-

ing Process Monitoring Research in Korea. Int. J. Mach.

Tools Manufact., Vol. 39, 1697–1715, 1999.

Chungchoo, C. and Saini, D. On-line Tool Wear Estimation

in CNC Turning Operations using Fuzzy Neural Network

Model. Int. J. Mach. Tools and Manufact., Vol. 42, 29–

40, 2002.

Coldwell, H., Aspinwall, D.K. and Dewes, R.C. Dry Mill-

ing of Aerospace Aluminium Alloys. Proc. of Int. Conf.

on Industrial Tooling, Test Valley Group Pub., 196–205,

Sept., 2003.

Dejong, C.A. For Faster Cutting: Cut in Balance [Cutter

Balancing]. Automotive Manufacturing and Produc-

tion, 42–44, Feb. 1999.

Destefani, J. e Tool’s the ing [Micro-machining: Tool-

ing]. Manufacturing Engineering, 77-84, May, 2005.

Dewes, R.C., Aspinwall, D.K. and Wise, M.L.H. High Speed

Machining – Cutting Tools and Machine Requirements.

Proc. of 31

Int. MATADOR Conf., Manchester (Eng-

land0, 455–461, April, 1995.

Dewes, R.C., Abrao, A.M. and Aspinwall, D.K. e Eects

of Tool/Workpiece Interface Temperature on Tool Wear

and Cutting Performance when Turning and High Speed

End Milling, Hardened Steel using PCBN and Conven-

tional Ceramic Tooling. Proc. of European Conf. on Ad-

vances in Hard Matls. Product., Stockholm (Sweden),

479–486, May, 1996.

Dewes, R.C. and Aspinwall, D.K. Fabrication and use of

PCBN Ball Nose End Mills for High Speed Machining of

Hardened Dies and Moulds. Proc. of 13

Annual Conf.

Of Irish Manufac. Comm. (IMC-13), Limerick (Ire-

land), 3–11, Sept., 1996.

Dewes, R.C. and Aspinwall, D.K. High Speed Machining

(HSM) of Hardened Tool Steel using Cemented Carbide

Tooling. Proc. of 3

Int. Conf. on Progress of Cutting

and Grinding, Osaka (Japan), 217–222, Nov., 1996.

Dewes, R.C. and Aspinwall, D.K. e Use of High Speed

Machining for the Manufacture of Hardened Steel Dies.

Trans. of NAMRI/SME, Vol. XXIV, 21–26, 1996.

Dewes, R.C. and Aspinwall, D.K. High Speed Machining –

Multi Function/Hybrid Systems. Proc. of Int. Conf. on

Industrial Tooling, Molyneux Press Ltd. (London), 91–

100, Sept., 2001.

Machining and Monitoring Strategies 543

Dong, Z., Li, H. and Vickers, G.W. Optimal Rough Ma-

chining of Sculptured Parts on a CNC Milling Machine.

Trans. of the ASME, Vol. 115, 424–431, Nov. 1993.

Eastman, M. Shrink-t Toolholding. Cutting Tool Eng’g.,

76–83, April, 1997.

Eastman, M. Balancing on the Fly [Integrated Tool Balanc-

ing]. Cutting Tool Eng’g., 24–33, April, 1998.

Edlen, B. e Refractive Index of Air. Metrologia 2, 1966.

El-Wardany, T.I. Attia, M.H. and Mohammed, E. Surface

Finish in Turning of Hardened Steel. ASME Pub. No.

PED-Vol. 62, Engineered Surfaces, 141–159, 1992.

Emel, E. and Kannatey-Asibu Jr, E. Acoustic Emission and

Force Sensor Fusion for Monitoring the Cutting Process.

Int. J. Mech. Sci., Vol. 31 (11), 795–809, 1989.

Fabry, D. Up to the Challenge [Micro-machining: Boring

Tooling]. Cutting Tool Eng’g., 34–37, Aug., 2001.

Fenton, R.G. and Oxley, P.L.B. Predicting Cutting Forces at

Super-High Cutting Speeds from Work Material Proper-

ties and Cutting Conditions. Proc. of 8

MTDR Conf.

(Oxford), Pergamon Press, 247–258, 1967.

Ford, D.G. Error Compensation Applied to High Precision

Machinery. Proc. of Int. Conf. Laser Metrology and Ma-

chine Performance, Southampton (England), Computa-

tional Mechanics Pub., 105–112, 1993.

Ford, D.G. Machining to Microns – Error Avoidance or

Compensation? Proc. of Int. Conf. Laser Metrology and

Machine Performance, Southampton (England), Com-

putational Mechanics Pub., 277–286, 1995.

Ford, D.G. Machine Tool Performance: Past and Present

Research Contribution from the Centre for Precision

Technologies. Proc. of Int. Conf. Laser Metrology and

Machine Performance, Hudderseld (England), WIT

Press, 403–419, 2003.

Gough, J. Accurate High Speed Contouring – e Dream to

the Reality (Parts: 1 to 3). Aircra Engineering, Vol. 62

(3), Mar., 1990.

Gough, J. Going Hell for Leather [HSM- Review]. Manu-

fact. Engineer (UK), 13–15, June, 1991.

Gull, M. Final Acceptance Test Results for the Nanocentre

250. Proc. of Int. Conf. Laser Metrology and Machine

Performance, Southampton (England), Computational

Mechanics Pub., 13–26, 1995.

Gull, M. An Update on BSI and ISO Machine Tool Accu-

racy Standards. Proc. of Int. Conf. Laser Metrology and

Machine Performance, Northumbria (England), WIT

Press, 77–87, 1999.

Hal, L. Adaptive Controls Save Tools and Time. American

Machinist, 30–33, Jan., 2007.

Hansen, P. Solid Contact [HSM: Toolholders having Dual-

and Triple-contact Fitment]. Cutting Tool Eng’g., 50–52,

July, 2001.

Hansen, S. Cutting the Hard Stu Right [Hard-part Machin-

ing]. Manufacturing Engineering, 179–187, May, 2005.

Hanson, K. Hard and Fast Rules [Hard-pert Turning]. Cut-

ting Tool Eng’g., 42–48, Jan., 2000.

Harris, C.G., Williams, J.H. and Davies, A. Condition Mon-

itoring of Machine Tools. Int. J. Prod. Res, Vol. 27 (9),

1445–1464, 1989.

Hazzleton, J.L. Tapping the Hard Stu [Hard-part: Tap-

ping]. Cutting Tool Eng’g., 62–68, March, 2007.

Huddle, D. Taking the Plunge [Hard-part: Plunge-turning].

Cutting Tool Eng’g., 38–40, Feb., 2002.

Javed, M.A., Hope, A.D., Littlefair, G. Adradi, D. Smith,

G.T. and Rao, B.K.N. On-line Tool Condition Monitor-

ing using Articial Neural Networks. Insight, Vol. 38 (5),

351–354, May, 1996.

Johnson, M. Achieving Accuracy [Linear Motional Drives].

Design Eng’g., 17–18, Oct., 2001.

Kannatey-Asibu, E. and Emel, E. Linear Discriminant Func-

tion Analysis of Acoustic Emission Signals for Cutting

tool Monitoring. Mech. Systems and Signal Processing,

Vol. 1 (4), 333–347, 1987.

Kennedy, B. Wall Smart [in-wall Milling]. Cutting Tool

Eng’g., 50–52, July, 2001.

Kennedy, B. e Skinny on Micro tools [Micro-machining:

tools]. Cutting Tool Eng’g., 28–34, Jan., 2003.

Kennedy, B. Solid Concept [Hard-part Turning: Rigidity].

Cutting Tool Eng’g., 36–99, Oct., 2004.

Kennedy, B. Got Micro? [Micro-machining: Machine

Tools]. Cutting Tool Eng’g., 34–44, Oct., 2006.

Kennedy, B. Moldmaking’s Dark Side [‘Lights-out’ Machin-

ing Strategies]. Cutting Tool Eng’g., 28–37, April, 2007.

King, R.I. Ultra-High-Speed Production Milling of Non-fer-

rous Materials. Proc. of 4

NAMRC Conf., 334–338,

May, 1976.

Klocke, F., Scmitz, R., Veselovac, D., Kirchheim, A and

Stirnimann, J. Experience with the High Speed Rotating

Dynamometer. Proc. of Int. Conf. on Industrial Tooling,

Test Valley Group Pub. (Southampton), 206–225, Sept.,

2003.

Knapp, W. Interim Checks for Machine Tools. Proc. of Int.

Conf. Laser Metrology and Machine Performance,

Hudderseld (England), Computational Mechanics

Pub., 161–168, 1997.

Kohl, R. A Machine Tool Built from Mathematics [Variax/

Hexapod: Non-orthogonal Machine Tool]. American

Machinist, Oct., 1994.

Komanduri, R. Mechanisms of Chip Formation in High-

speed Machining. Proc. of Int. Conf. on Industrial Tool-

ing, Shirley Press Ltd. (Southampton), 20–34, Sept.,

1995.

Lamb, J. Ultra-precision Machining on a CNC Diamond

Turning Lathe. Proc. of Int. Conf. on Industrial Tooling,

Molyneux Press Ltd. (London), 98–108, Sept., 1999.

Laube, R. e Big Squeeze [Hydraulic Toolholders]. Cutting

Tool Eng’g., 59–60, Mar., 1994.

544 Chapter 9

Layne, M. On Balance [Balanced Milling Cutters]. Cutting

Tool Eng’g., 36–41, Aug., 1991.

Lee, J.H. and Lee, S.J. One-step-ahead Prediction of Flank

Wear using Cutting Force. Int. J. Mach. Tools Manufact.,

Vol. 39, 1747–1760, 1999.

Lewis, D.L. and Hunt, J. Factors for Successful Rotating Tool

Operation at Hi-speed. Proc. of Int. Conf. on Industrial

Tooling, Shirley Press Ltd. (Southampton), 169–250,

Sept., 1995.

Li, S. and Elbestawi, M.A. Tool Condition Monitoring in

Machining by Fuzzy Neural Networks. J. of Dynamic

Ststems, Measurement and Control, Vol. 118, 665–762,

Dec., 1996.

Lin, S.C. and Ting, C.J. Drill Wear Monitoring using Neu-

ral Networks. Int. J. Mach. Tools Manufact., Vol. 36 (4),

465–475, 1996.

Littlefair, G., Javed, M.A. and Smith, G.T. Tool Wear Moni-

toring for Turning Centres. Proc. of Int. Conf. Laser Me-

trology and Machine Performance, Southampton (Eng-

land), Computational Mechanics Pub., 251–259, 1995.

Littlefair, G., Javed, M.A. and Smith, G.T. Tool Condition

Monitoring using Neural Network Techniques, Proc.

of Int. Conf. on Industrial Tooling, Shirley Press Ltd.

(Southampton), 127–133, Sept., 1995.

Littlefair, G., Javed, M.A. and Smith, G.T. Fusion of Inte-

grated Multisensor Data for Tool Wear Monitoring.

IEEE Int. Conf. On Neural Networks Perth (Australia),

Vol. 2., 734–737, Nov. 1995.

Longsta, A.P. Fletcher, S. and Ford, D.G. Practical Experi-

ence of ermal Testing with Reference to ISO 230 Part

3. Proc. of Int. Conf. Laser Metrology and Machine

Performance, Hudderseld (England), WIT Press,

473–483, 2003.

Macarthur, M. High and Hardened [HSM: Hardened

Moulds and Dies]. Cutting Tool Eng’g., 34–41, Sept.,

2001.

Maeng, H.Y., Ly, M.H. and Vickers, G.W. Feature-based

Machining of Curved Surfaces using the Steepest Directed

Tree Approach. J. of Manufact. Systems, Vol. 15 (6),

1–13, 1996.

Manthey, P. HSK Leads the Way [HSK Tool holders and Tool

Balancing]. Cutting Tool Eng’g., 38–44, April, 1997.

Mize, C.D. and Ziegert, J.C. Neural Network ermal Error

Compensation of a Machining Center. Precision Eng’g.,

Vol. 24, 338–346, 2000.

Moak, N. Balancing Act [Balanced Toolholders]. Cutting

Tool Eng’g., 46–49, Oct., 2001.

Myler, J.K. and Page, D.A. Factors Governining Surface

Form Accuracy in Diamond Machined Components.

Proc. of SPIE, Vol. 915, 84–95, 1988.

Noaker, P.M. Milling’s Speed Limits. Manufacturing Engi-

neering, 57–65, May, 1995.

Park, S., Jun, Y-T., Lee, C-W. and Yang, M-Y. Determining

the Cutting Conditions for Sculptured Surface Machin-

ing. Int. J. Adv. Manuf. Technol., Vol. 8, 61–70, 1993.

Oakham, M. Finding a Niche for NURBS. Metalworking

Production, MACH’98Issue, 29–35, 1998.

Okushima, K., Hitomi, K., Ito, S. and Narutaki, N. A Fun-

damental Study of Super-high Speed Machining. Bull. of

JSME, Vol. 8 (32), 702–710, 1965.

Okushima, K., Hitomi, K. and Ito, S. A Study of Super-High-

Speed Machining. Annals of the CIRP, Vol.13, MS 72/8,

Great Britain, 399–410, 1966.

Park, S., Jun, Y-T, Lee, C-W. and Yang, M-Y. Determining

the Cutting Conditions for Sculptured Surfaces. Int. J.

Adv. Manuf. Technol., Vol. 8, 61–70, 1993.

Postlethwaite, S.R., Ford, D.G. and Morton, Geometric Er-

rors from Dynamic Data – A Novel Calibration Tech-

nique. Proc. of Int. Conf. Laser Metrology and Machine

Performance, Southampton (England), Computational

Mechanics Pub., 139–148, 1995.

Postlethwaite, S.R., Ford, D.G. and Morton, D. Dynamic

Calibration of CNC Tools. Int. J. Mach. Tools Manufact.,

Vol. 37 (3), 287–294, 1997.

Recht, R.F. Catastrophic ermoplastic Shear [UHSM:

Shearing Mechanisms]. Trans. of the ASME , J. Appl.

Mech., Vol. 32, 189–193, June, 1964.

Richter, A. Size Matters [Nanosized-carbide composites

for: Nano-metalcutting Tools]. Cutting Tool Eng’g.,

58–63, June, 2000.

Richter, A. Plugging In [In-process Tool Diagnostics]. Cut-

ting Tool Eng’g., 42–44, Jan., 2001.

Richter, A. Shapely and Strong [Button Milling Cutters –

HSM]. Cutting Tool Eng’g., 40–45, July, 2001.

Richter, A. Tool Watch [Tool Monitoring]. Cutting Tool

Eng’g., 30–34, Aug., 2003.

Richter, A. Equilibrium Adjustment [HSM: Cutter Balanc-

ing].Cutting Tool Eng’g., 30–38, Feb., 2005.

Richter, A. Tool Geometries for a Shrinking World [Tooling

for Micro-machining]. Cutting Tool Eng’g., 46–56, Jan.,

2006.

Richter, A. e ‘Hard’ Way [Hardened Dies and Moulds: Con-

tour Milling]. Cutting Tool Eng’g., 34–38, Feb., 2007.

Richter, A. e Squeeze is On [Micro-machining: Part Mea-

surement]. Cutting Tool Eng’g., 38–46, April, 2007.

Rivin, E.I. Tooling Structure: Interface between Cutting

Edge and Machine Tool. Annals of the CIRP, Vol. 49 (2),

591–663, 2000.

Schuett, T.J. Look-ahead for Faster Machining. Cutting Tool

Eng’g., 40–44, March, 2002.

Schulz, H. and Moriwaki, T. High-speed Machining. A

nnals

of the CIRP, Vol. 41 (2), 637-643, 1992. Proc. of the

ASME, Paper No. 94-GT-375, 1994.

Schulz, H. and Hock, S. High Speed Milling of Turbine

Blades.

Machining and Monitoring Strategies 545

Segerlin, C. Fast Lane [HSM: milling]. Cutting Tool Eng’g.,

34–39, Dec., 2006.

Selberg, L.A. Interferometer Accuracy and Precision. Proc.

of SPIE, Vol. 1400, 24–32, 1990.

Shaw, M.C. and Vyas, A. Chip Formation in the Machin-

ing of Hardened Steel. Annals of the CIRP, Vol. 42 (1),

29–33, 1993.

Siems, S. Dollmeier, R. and Warneke, G. Material Behav-

iour of Aluminium 7075 and AISI 1945 Steel in High

Speed Machining. Trans. of NAMRI/SME, Vol. 28,

101–106, 2000.

Sims, C. Hope, A.D., Smith, G.T. and Gull, M. Correlation of

Machine Tool and CMM Accuracy and Precision. Proc. of

Int. Conf. Laser Metrology and Machine Performance,

Northumbria (England), Wit Press, 389–402, 1999.

Smith, G.T. Monitoring the Unmanned Machining System,

e FMS Magazine, Vol. 7 (3), 127–131, 1989.

Smith, G.T. Condition Monitoring for Sub-micron Machin-

ing on Turning Centres, Proc. of Comadem Int. Conf.,

Southampton (UK), IO Publishing Ltd., 146–150, 1991.

Smith, G.T. Ultra-high Speed Machining – e Problems

Associated with Spindle Designs, Tooling and Machined

parts when Milling. Proc. of FAIM’92, Washington D.C.,

CRC Press, 947–961, 1992.

Smith G.T. and Hanson, C. Part Programming Machining

Centres: Computer-aided Manufacture (CAM) versus

Manual Programming – A Comparison. Proc. of Int.

Conf. Laser Metrology and Machine Performance,

Southampton (England), Computational Mechanics

Pub., 183–194, 1993.

Smith, G.T. and Booth, S. e Manufacture of Propellers us-

ing three and ve axis machining centres. Proc. of Int.

Conf. Laser Metrology and Machine Performance,

Southampton (England), Computational Mechanics

Pub., 307–316, 1993.

Smith, G.T. and Maxted, P. Evaluating the High-speed Ma-

chining Performance of a Vertical Machining Centre

during Milling Operations. Proc. of Int. Conf. Laser Me-

trology and Machine Performance, Southampton (Eng-

land), Computational Mechanics Pub., 125–138, 1995.

Smith, G.T, Wyatt, J.E. and Hope, T. Ultra-high Speed Face

Milling of Stainless Steel utilising large Dual-plane Bal-

anced Cutters. 4

Int. Conf. on Behaviour of Materials

in Machining, Straord-upon-Avon (England), e

Inst. of Materials, 199–207, Nov., 1998.

Smith, G.T. and Wyatt, J.E. Ultra High Speed Face Milling.

Metalworking Production, 37–38, May, 1999.

Smith, G.T. High-speed Machining (HSM) using Circular In-

terpolation of Free-cutting Steels. Proc. of Int. Conf. La-

ser Metrology and Machine Performance, Northumbria

(England), Wit Press, 457–467, 1999.

Smith, G.T., Sims, C., Hope, A.D. and Gull, M. A Stereo-

metric Artefact for Volumetric Calibration of Machining

Centres. Proc. of Int. Conf. Laser Metrology and Ma-

chine Performance, Birmingham (England), Wit Press,

51–58, 2001

Smith, G.T. Littlefair, G. Wyatt, J.E., Berry, J.T. and Hills,

M.J. Ultra-high Speed Turning on a Vertical Machin-

ing Centre of Aerospace Aluminium Alloys. Proc. of

Int. Conf. Laser Metrology and Machine Performance,

Hudderseld (England), Wit Press, 34–43, 2003.

Stovicek, D. Hard-part Turning. Tooling and Production,

25–26, Feb. 1992.

Tanaka, Y. Tsuwa, H. and Kitano, M. Cutting Mechanism in

Ultra-High-Speed Machining. Proc. of the ASME, Paper

No. 67-Prod-14, 1967.

Tansel, I., Trujillo, M., Bao, W-Y. and Arkan, T. Detecting

Microtool Failures [Micro-endmilling]. Cutting Tool

Eng’g., 54–62, Sept., 1997.

Tlusty, J. and Andrews, G.C A Critical Review of Sensors for

Unmanned Machining. Annals of the CIRP, Vol. 32 (2),

563–572, 1983.

Tlusty, J. Dynamics of High-speed Milling. Proc. of ASME:

High-speed Machining Conf., (New Orleans), 101–126,

1984.

Vaughn, R.L. A eoretical Approach to the Solution of

Machining Problems. ASTME Technical Paper No. 164,

Sept., 1958.

Von Turkovich, B.F. Inuence of Very-High Cutting Speed

on Chip Formation Mechanics. VII North American

Metalworking Research Conf. Proc., SME Tech., 13–16

May, 1979.

Watts, M.L. Evolving Aerospace Machining Processes [Boe-

ing Commercial Airplane: Visual/Slide Presentation of

HSM]. Proc. of Int. Conf. on Industrial Tooling, Moly-

neux Press Ltd. (London), 14–22, Sept., 2001.

Wheeler, S. Tool Setting on an Ultra-precision Lathe. Proc. of

Int. Conf. Laser Metrology and Machine Performance,

Birmingham (England), WIT Press, 178–190, 2001.

White, A.J. Postlethwaite, S.R. and Ford, D.G. Measuring

and Modelling ermal Distortion on CNC Machine

Tools. Proc. of Int. Conf. Laser Metrology and Machine

Performance, Birmingham (England), WIT Press, 69–

89, 2001.

Wyatt, J.E., Ultra-high Speed Face Milling. Proc. of Int.

Conf. on Industrial Tooling, Molyneux Press Ltd. (Lon-

don), 109–118, Sept., 1999.

Wyatt, J.E., Smith, G.T. and Hope, T. An Investigation into

the Rise of Cutting Shear Angle when Utilising Two Dif-

ferent Approaches to the High Speed Milling of Austenitic

Stainless Steels. ASME/IMEC (Washington, D.C.), Tech.

Paper No. IMEC 2003–42272, Nov. 2003.

546 Chapter 9

Young, K.W. High-speed Machining utilising Robotics. Proc.

of Int. Conf. on Industrial Tooling, Molyneux Press Ltd.

(London), 149–153, Sept., 1999.

Youse, R. and Ichida, Y. A Study on Ultra-high-speed Cut-

ting of Aluminium Alloy: Formation of Welded Metal

on Secondary Cutting Edge of the Tool and its Eects on

the Quality of Finished Surface. J. Prec. Eng’g., Vol. 24,

371–376, Oct. 2000.

Zenker, J.S. Getting Acquainted with High-speed Spindles.

American Machinist, 59–62, Nov. 1994.

Books, Booklets, Reports, Standards And Theses

Alexander, W.O, Davies, G.J., Reynolds, K.A. and Brad-

bury, E.J. Essential Metallurgy for Engineers. Van Nos-

trand Reinhold (UK), 1985.

Arndt, G. Ballistically Induced Ultra-High-Speed Machin-

ing. PhD esis, Monash University, Melbourne, Aus-

tralia, 1971.

Avner, S.H. Introduction to Physical Metallurgy (2

Ed.).

McGraw-Hill Int. Book Co., 1974.

Bell, S. A Beginner’s Guide to Uncertainty of Measurement.

NPL (Teddington, UK), Measurement Good Practice

Guide No. 11, ISSN 1368–6550, Aug. 1999.

Beurteilungsmassstäbe für den Auswuchtzustand rotieren-

der starrer Körper, VDI: 2060 respective ISO: 1940–1:

1986.

Birch, K. Estimating Uncertainties in Testing. NPL (Ted-

dington, UK), Measurement Good Practice Guide No.

36, ISSN 1368–6550, Mar., 2001.

Busch, T. Fundamentals of Dimensional Metrology. Delmar

Pubishers Inc., 1989.

BS EN 1550: 1997. Machine-tools Safety – Safety Require-

ments for the Design and Construction of Work Holding

Chucks.

Callister, Jr., W.D. Materials Science and Engineering – An

Introduction (6

Ed). John Wiley & Sons, Inc., 2003.

Childs, P.R.N. Mechanical Design. Elsevier Butterworth-

Heinemann, 2004.

Coldwell, L. and Quackenbush, L. A Study of High-Speed

Milling. Oce of Research Administration, e Uni-

versity of Michigan, Report No.: 05038–1 and 2F, Parts

I and II, Dec., 1962.

Collett, C.V and Hope, A.D. Engineering Measurements.

Pitman Pub. Ltd. (London), 1979.

Cottrell, A. An Introduction to Metallurgy (2

Ed.). Edward

Arnold Pub., 1979.

Dagnall, H. Let’s Talk Roundness [Roundness Assessment

– 3

Ed.]. Taylor Hobson Pub., Nov., 1996.

Downs, M.J. Developments in Nanotechnology. NPL Pub.,

Vol. 1.

Ernst, A. Digital Linear and Angular Metrology – Position

Feedback Systems for Machines and Drives. Verlag Mod-

erne Industrie (GmbH), 1990.

Figliola, R.S. and Beasley, D.E. eory and Design for Me-

chanical Measurements (3

Ed.). John Wiley & Sons,

Inc., 2000.

Flom, D.G., et al. Advanced Machining Research Program

(AMRP). General Electric Co., Schenectady (NY) –

Contract No.: F 33615–80–C–5057. Air Force Systems

Command, Air Force Wright Aeronautical Laborato-

ries/MLTM, Wright-Patterson Air Force Base, Dayton,

Ohio, Feb., 1980.

Fräswerkzeuge für die Hochgeschwindigkeitsbearbeitung,

Sicherheitstechnische Anforderungen, ISO: 15461:

1998.

Galyer, J.F.W. and Shotbolt, C.R. Metrology for Engineers

Ed.). Cassell Pub. Ltd, 1990.

Griths, B.J. Manufacturing Engineering Modular Series:

Engineering Drawing for Manufacture. Kogan Page Sci-

ence, 2003.

ISO 10791-7: 1997. Test Conditions for Machining Centres

– Part 7: Accuracy of a Finished Test Piece. International

Organization of Standardization, Geneva, Switzerland,

1997.

Kief, H.B and Waters, T.F. Computer Numerical Control

– A CNC Reference Guide. Glencoe Division, Macmil-

lan/McGraw-Hill, 1992,

King, R.I. Phase IIA Summary Technical Report of the Feasi-

bility Study for High-Speed Machining of Ships Propellers.

Contract No. 001430–79–C–0326, Lockheed Missiles

and Space Company, Inc., Sunnyvale, CA, Nov., 1979.

King, R.I. Handbook of High-speed Machining Technology.

Chapman & Hall Pub. (NY and London), 1985.

Komanduri, R. e Mechanics of Chip Segmentation. PhD

esis, Monash University, Melbourne, Australia, 1972.

Cutting tool Engineering: Micro-machining Supplement

(2006).

Richter, A. Hole Down [Micro-holemaking: Drilling].

S2–S7,

Morcom, C. Pint-size Performance [Micro-machining:

Tooling]. S8–S12.

Nakazawa, H. Principles of Precision Engineering. Oxford

Science Pub., 1994.

National Aerospace Standard (NAS) 979. [Machined Test

piece – by Prismatic and Circular Interpolation Ma-

chining] National Standards Association Inc., 1321

Fourteenth Street, N.W. Washington, DC 20005, 1969.

Newnes Engineer’s Pocket Book (6

Ed.) [Stereometry

of Volumetric Solids], Newnes-Butterworth Pub.,

326–328, 1978.

Oakland, J.S. Statistical Process Control – A Practical Guide.

Heinenann Ltd. Pub., 1986.

Machining and Monitoring Strategies 547

Renishaw plc Pub. No. H/8014/0354/03/A. Ballbar Diag-

nostic Manual.

Rollason, E.C. Metallurgy for Engineers (4

Ed.). Edward

Arnold (Pub.) Ltd., 1978.

Salomon, C.J. Process for Machining Metals of Similar Act-

ing Materials when being Worked by Cutting Tools. Ger-

man Patent No. 523594, 1931.

Sandvik Coromant Pub. Modern Metal cutting – A Practical

Handbook. 1994.

Sandvik Coromant Pub. Metalworking World: Advanced

Developments in Machining Applications [Tool Condi-

tion Monitoring using Neural Networks]. No. 1, 25–27,

1996.

Sandvik Coromant Pub. No. C-5000: 194 Eng: Advanced

Developments in Machining Applications. Metalworking

World (1), 1996.

Sandvik Coromant Pub. No. C-1120:1 Eng. A

pplication

Guide: Facemilling. June, 1998.

Sandvik Coromant Pub. No. C-1120:2 Eng. Application

Guide: Die and Mould Making. Oct., 2000.

Sandvik Coromant Pub. No. C-2920:18 Eng/01. Applica-

tion Guide: Gas Turbines. Aug., 2002.

Sandvik Coromant Pub. No. C-2920:17 Eng/01. Applica-

tion Guide: Aerospace Frames. Sept., 2003.

Schaer, J.P., Saxena, A., Antolovich, S.D., Sanders, Jr, T.H.

and Warner, S.B. e Science and Design of Engineer-

ing Materials (2

Ed.). McGraw-Hill Companies, Inc.,

1999.

Smith, G.T. Advanced Machining – e Handbook of Cut-

ting Technology. IFS/Springer Verlag, 1989.

Smith, G.T. CNC Machining Technology. Springer Verlag

Pub., 1993.

Smith, G.T. Condition Monitoring of Machine Tools (Chap-

ter 9), in: Handbook of Condition Monitoring (1

Ed.),

Ed. by Rao, B.K.N., Elsevier Science Ltd, 1996.

Smith, G.T. Industrial Metrology – Surfaces and Roundness.

Springer Pub., 2002.

Stout, K.J. From Cubit to Nanometre – A History of Precision

Measurement. NPL Pub. (Teddington, UK), Dec. 1998.

Stroud, K.A. Engineering Mathematics (5

Ed.). Palgrave

Pub. Ltd., 2001.

Taylor Hobson Pub. Optical Alignment [Techniques and

Equipment for Machine Calibration]. 1984.

Taylor Hobson Pub. A Guide to the Measurement of Round-

ness. No.: RParam 4E SP 03/03, 2003.

Taylor, B.N. and Kuyatt, C.E. Guidelines for Evaluating and

Expressing the Uncertainty of NIST Measurement Re-

sults. NIST Technical Note: 1297, Sept., 1994.

elning, K-E, Steel and its Heat Treatment – Bofors Hand-

book. Butterworths Pub., 1975.

Trent, E.M. Metal Cutting (2

Ed.). Butterworths Pub.,

1984.

Truncale, J.F. and Winiecki, T.C. High Speed Machining, Ex-

panded Production Machinability Data for Aerospace Al-

loys. AMRP Report #SRD-81–086, General Dynamics

Corvair Div. Contract F33615–80–C–5057, submitted

to Air Force Systems Command, Oct., 1981.

Valentino, J.V. and Goldenberg, J. Introduction to Computer

Numerical Control (2

Ed.). Prentice-Hall, Inc., 2000.

Vaughn, R.L. Ultra-High-Speed Machining [Feasibility

Study]. Final Technical Engineering Report (Phase 1),

AMC Tech. Report 60-7-635 (1), AMC Aeronautical

Systems Center, USAF, Wright-Patterson AFB, June,

1960.

Vickers, G.W. Ly, M.H. and Oetter, R.G. Numerically Con-

trolled Machine Tools. Ellis Horwood Ltd., 1990.

Whitehouse, D.J. Surfaces and their Measurement. Hermes

Penton Ltd., 2002.

Woodwark, J. Computing Shape [CAE of Part Geometries].

Butterworths Pub., 1986.

Wyatt, J.E. High-speed Face and End Milling of Stainless Steel

Grades. PhD esis, Southampton Institute (UK), 2002.

Zygo Corporation Pub. Practical Guide to Common Inter-

ferometer Setups. Zygo Corp., Laurel Brook Road, Mid-

dleeld CT, USA, 1992.

548 Chapter 9

Appendix

‘La dernière chose qu’on trouve en faisant un ouvrage,

est de savoir celle qu’il faut mettre la première.’

TRANSLATION:

‘e last thing on discovers in composing a work is what to put rst.’

Blaise Pascale

(1623 – 1662)

(French: Philopher, Mathematician and Physicist)

[In: Pensées, No.19]

Appendix 1a. ISO code key – external toolholders. [Courtesy of Sandvik Coromant].

550 Appendix

Appendix 1b. ISO code key – solid boring bars. [Courtesy of Sandvik Coromant].

Appendix 551

Appendix 1c. ISO code key – cartridges. [Courtesy of Sandvik Coromant].

552 Appendix