Kuppan T. Heat Exchanger Design Handbook
Подождите немного. Документ загружается.
1074
References
51.
Arc welding of carbon steels: Submerged arc welding, in
Metals Handbook,
Vol. 6,
Welding,
Brazing, and Soldering,
9th edition (E.
F.
Nippes, ed.), American Society for Metals, Metals Park,
Ohio,
1983, pp. 114-151.
52.
Gas metal arc welding (MIG welding), in
Metals Handbook,
Vol.
6,
Welding, Brazing, and Solder-
ing,
9th edition
(E.
F.
Nippes, ed.), American Society for Metals, Metals Park, Ohio, 1983, pp.
152-2 13.
53.
Plasma arc welding, in
Metals Handbook,
Vol. 6,
Welding, Brazing, and Soldering,
9th edition
(E.
F.
Nippes, ed.), American Society for Metals, Metals Park, Ohio, 1983, pp. 214-224.
54.
Electroslag welding, in
Metals Handbook,
Vol. 6,
Welding, Brazing, and Soldering,
9th edition
(E.
F. Nippes, ed.), American Society for Metals, Metals Park, Ohio, 1983, pp. 225-237.
55.
Electrogas welding, in
Metals Handbook,
Vol. 6,
Welding, Brazing, and Soldering,
9th edition
(E.
F.
Nippes, ed.), American Society for Metals, Metals Park, Ohio, 1983, pp. 238-244.
56.
Arc welding of low alloy steels and other ferrous metals, in
Metals Handbook,
Vol. 6,
Welding,
Brazing, and Soldering,
9th edition
(E.
F.
Nippes, ed.), American Society for Metals, Metals Park,
Ohio,
1983, pp. 245-370.
57.
Weld discontinuities, in
Metals Handbook,
Vol. 6,
Welding, Brazing, and Soldering,
9th edition
(E.
F.
Nippes, ed.), American Society for Metals, Metals Park, Ohio, 1983, pp. 829-855.
58.
Brosilow, R., How can fabricators control weld properties?,
Welding Design
&
Fabrication,
March, 46-50 (1985).
59.
Bailey, N., The establishment of safe welding procedures for four low alloy steels,
Welding Jour-
nal,
51,
1972, Welding Research Supplement, pp. 169s-177s.
60.
Yurioka, N., Suzuki, H., Ohshita,
S.,
and Saito,
S.,
Determination of necessary preheating tempera-
ture in steel welding,
Welding
J.,
June, 147-s-153-s (1983).
61.
Gross, J. H., Pressure vessel steels: Promise and problems, in
Source Book on Materials Selection,
Vol. 1 (R. B. Guina, compiler), American Society for Metals, Metals Park, OH, 1977, pp. 271-
276.
62.
Farrar, J. C. M., and Dolby,
R.
E.,
Lamellar Tearing in Welded Steel Fabrication, Welding Insti-
tute, Abington Hall, Abington, Cambridge,
UK,
1972.
63.
Wormington, H., Lamellar tearing in silicon-killed boiler plate,
Welding and Metal Fabrication,
September, 370-373 (1967).
64.
Gross-Wordemann, J., and Dittrich,
S.,
Prevention of temper embrittlement in 2.25Cr-
1
MO weld
metal by metallurgical actions,
Welding
J.,
May, 123-s-128-s (1983).
65.
Complementary information test for lamellar tearing,
Welding in the World,
19,
47-53
(
198
1
).
66. Lippold, J.
C.,
and Savage, W.
F.,
Solidification of austenitic stainless steel weldments: Part III-
The effect of solidification behaviour on hot cracking susceptibility,
Welding
J.,
December, 388-
S-396-s (1982).
67.
Goodwin, G. M.,
Hot
cracking, measurement, mechanisms and modelling,
Welding
J.,
February,
26-3
1
(
1990).
68.
Lin, W., Lippolod, J. C., and Baseslack, W. A., 111,
An
evaluation of heat affected zone liquation
cracking susceptibility, Part
I:
Development of a method for quantification,
Welding
J.,
April, 135-
S-153-s (1993).
69.
Dhooge, A., and Vinckier, A., Reheat cracking-Review of recent studies (1984- 1990),
Welding
in the World,
30,
44-71 (1992).
70.
Nakamua, H., Naiki, T., and Okahayaski, H., Fracture in the process of stress relaxation under
constant strain, in
Proceedings
of
the First International Conference
on
Fracture,
Vol. 2., Sendai,
Japan, 12-17 September, pp. 863-878, and Stress Relief Craclung in HAZ, IIW-IX-648-69 and
IIW-X-53 1-69.
71.
Onodera, S., Improved quality of heavy steels and their welds as related to the integrity of reactor
pressure components,
Nuclear Energy Design,
85,
(
1985).
72.
Lippold, J. C., Baeslack, W. A. 111, and Varol,
I.,
Heat affected zone liquation cracking
in
austen-
itic and duplex stainless steels,
Welding
J.,
January, 1-s-5-s (1992).
73.
Lin,
S.,
and Indacochea, J. E., Weldability of steels, in
Metals Handbook,
Vol.
1,
Properties and
References
1075
Selection: Iron, Steels, and High Per$ormance Alloys,
10th edtion, American Society for Metals,
Metals Park, Ohio, 1990, pp. 603-613.
74.
Connor, L. P., ed.,
Welding Hand Book,
Vol. 1,
Welding Technology,
eighth edition, 1987, pp.
102- 121.
75.
Datasheet No. 11 lb, Weldability testing-Weld cracking tests,
Welding
J.,
February, 73 (1990).
76.
Kautz, H. R., and Herbert,
E.
D., Modem welding techniques and component performance,
Weld-
ing
in the World,
30,
337-341 (1992).
77.
U.
S.
Steel Handbook of Plate Products, U.
S.
Steel Group, Pittsburgh, Pa.
78.
Lohmeier, A., and Reynolds,
S.
D., Jr., Carbon steel tube-to-tubesheet joints for high pressure
feedwater heaters,
Westinghouse Engineer,
September,
138-
143
(
1966).
79.
Jarman, R. A., and Shreir,
L.
L.,
Corrosion of jointed structures-Part 11,
Welding
&
Metal Fabri-
cation,
NovemberDecember, 445-449 (1987).
80.
Kirby, G. N., Corrosion performance of carbon steel, in
Materials Engineering
I:
Selecting Materi-
als for Process, Chemical Engineering,
12 March 1979, pp. 72-84.
81.
Uhlig, H. H.,
Corrosion and Corrosion Control,
John Wiley
&
Son, Inc., New York, 1963.
82. Campbell, H. C., The ABCs of welding metallurgy for plain carbon steels,
Welding
J.,
August,
55-57 (1994).
83.
Metals Handbook,
Vol. 6,
Welding, Brazing, and Soldering,
9th edition
(E.
F. Nippes, ed.), Ameri-
can Society for Metals, Metals Park, Ohio, 1983, pp. 238-244.
84.
Bargett, W.
E.,
and Reeve, L., High strength weldable steel,
Iron and Steel,
Oct./Nov. (1954).
85.
Irvine,
K.
J.,
The development of high strength structural steels, in
Proc. ISI/BZSR, Joint Coifer-
ence,
IS1 Publication 104, ISI, London, 1967.
86.
Carbon and low-alloy steels, in
Welding Handbook,
Vol. 4,
Metals and Their Weldability,
seventh
edition
(Kerns,
ed.), American Welding Society, 1982, pp. 2-74.
87.
Gutzeit, T., Corrosion in petroleum refining and petrochemical operations, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition, American Society for Metals, Metals Park, Ohio, 1987, pp. 1262-
1287.
88.
Wordemann, G. J., and Dittrich,
S.,
Prevention of temper embrittlement in 2.25Cr-1Mo weld metal
by metallurgical actions,
Welding
J.,
May, 123-s-128-s (1983).
89.
Craig, W. R., Refineries test their metals,
Welding Design
&
Fabrication,
April, 81-85 (1977).
90.
Wilson, A. D., Tougher steels improve pressure vessel performance,
Adv. Mater. Processes,
4,
39-42
(
1993).
91.
Murakami, Y., Nomura, T., and Watnabe, J., Heavy section 2Wr-lMo steel for hydrogenation
reactors, in
Application of 2.250-IMo Steel
for
Thick Wall Pressure Vessels, ASTM STP
755
(G.
S.
Sangdahl and M. Semchyshen, eds.), American Society for Testing and Materials, Philadelphia,
1982, pp. 383-417.
92.
Baumert,
K.
L.,
and Polk, C. J., Temper embrittlement studies on 2.25Cr-1Mo steel,
Mater. Per-
form.,
September, 39-45 (1976).
93.
Swift, R. A., Effects of composition and heat treatment on the mechanical properties of 300 mm
gage 2.25Cr-1Mo steel plate, in
Application of 2.25Cr-IMo Steel for Thick Wall Pressure Vessels,
ASTM STP
755
(G.
S.
Sangdahl and
M.
Semchyshen, eds.), American Society for Testing and
Materials, Philadelphia, 1982, pp. 166- 188.
94.
Imgram, A. G., and Swift, R. A., Pressure vessel, piping and welding needs for coal conversion
systems,
J.
Mater. Energy Systems,
December, 212-221 (1985).
95.
Lukens Plate Steel Specification Guide,
1993, Lukens
S
tee1 Company, Coatesville, Pa.
96.
Yamamoto,
S.,
and Natsume,
S.,
Improvement of toughness of Cr-Mo steel weld metal at low
temperature,
Welding and Metal Fabrication,
April, 1
10-
1 15
(
1986).
97.
Modified 9 Cr-1 MO steel for power plants,
Molybdenum Mosaic,
6,
17, (1982). Climax Molybde-
num Company of Michigan.
98.
Ritche, R.
O.,
Parker, E. R., Spencer, P.
N.,
and Todd, J. A., A new series of advanced 3Cr-MO-
Ni steels for thick section pressure vessels in high temperature and pressure hydrogen service,
J.
Mater. Energy Systems,
December, 15
1
-
162 (1964).
99.
Brown,
R.
S.,
How to select the right stainless steel,
Adv. Mater. Processes,
4,
20-24 (1994).
1076
References
100.
Debold, T. A., Select the right stainless steel,
Chem. Eng. Prog.,
November, 38-43 (1991).
101. Redmond,
J. D., and Miska, K. H., The basics of stainless steels,
Chem. Eng.,
October (1982).
102.
Linstroth, R. L., Check for atmospheric corrosion when using stainless steels,
Chem. Eng. Prog.,
July, 49-51 (1991).
103.
Metallurgy of fusion welding,
Pt
3: Stainless steels,
Welding
&
Metal Fabrication,
October, 376-
378 (1994).
104.
Llewellyn, D. T.,
Steels, Metallurgy and Applications,
Butterworth-Heineman, 1992.
105.
AL-6XNR Alloy, Allegheny Ludlum
S
tee1 Corporation, Pittsburgh, Pa.
106.
Kearns, J. R., and Deverell, H.
R.,
The use of nitrogen to improve the corrosion resistance of
FeCrNiMo alloys for the chemical process industries,
Mater. Perform.,
June, 18-28 (1987).
107
Davison, R. M., Corrosion of stainless steel, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition,
American Society for Metals, Metals Park,
Ohio,
1987, pp. 546-575.
108.
Davison, R. M., Rahoi, D. W., and Gemmel, G., Stainless steels for heat exchanger service, in
Industrial Heat Exchangers Conference Proceedings
(A. J. Hayes, W. W. Liang,
S.
L. Richlen,
and E.
S.
Tabb, eds.), American Society for Metals, Metals Park, OH, 1985, pp. 371-380.
109.
Forchhammer, P., Results
of
damage research on corrosion failures
in
heat exchangers,
Heat
Transfer Eng.,
5,
19-32 (1984).
110.
Product Literature, Mueller Accu-Therm Plate Heat Exchangers, Paul Mueller Company, Spring-
field, MO.
111
Blom, K. J., and Degerbeck, J., Low manganese austenitic stainless steels has improved resistance
to pitting and crevice corrosion,
Mater. Perform.,
July, 52-54 (1983).
112.
Slaughter, G. M., Franco-Ferreira, E. A., and Patriarca, P., Welding and brazing of high tempera-
ture radiators and heat exchangers,
Welding
J.,
January, 15-22 (1968).
113.
Redmond, D. J., and Miska, K. H., High performance stainless steels for high chloride service-
Part I,
Chem. Eng.,
25 July, 93-96 (1983).
114.
Schillmoller, C. M., and Althoff, J.
H.,
How to avoid failures of stainless steels,
Chem. Eng.,
May,
119-122 (1984).
115.
Pollock, W. I., What’s hot in metal alloys,
Chem. Eng.,
October, 78-88 (1992).
116.
Kane,
R.
D., Super stainless steels resist hostile envirnoments,
Adv. Mater. Process,
7,
16-20
(1993).
117.
Borenstein,
S.
W., Microbiologically influenced corrosion failures of austenitic stainless steel
welds,
Mater. Perform.,
August, 62-66 (1988).
118.
Odegard, L., Welding of stainless steels, corrosion in welds, effect of oxides, slag and weld defects
on the pitting resistance,
Welding
in
the World,
36,
153-160 (1995).
119.
Brosilow, R., Can you weld to avoid corrosion,
Welding Design
&
Fabrication,
September, 67-74
(1982).
120.
Standard Recommended Practice for Examination and Evaluation of Pitting Corrosion, G 46,
An-
nual Book of ASTM Standards,
American Society Testing and Materials, Philadelphia.
121.
Garner, A., Materials selection, for bleached pulp washers,
Pulp
&
Paper Canada,
82,
1
(1981).
122.
Bandy, R., Lu, Y. C., Newman,
R.
C., and Clayton, C. R., Roles of nitrogen
in
improving the
resistance to localised corrosion in austenitic stainless steels, in
Equilibrium Diagrams and Local-
ised Corrosion,
Electrochemical Society, New Orleans, La., 1984, p. 47 1.
123.
Dexter, C.
S., Localized corrosion, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition, American
Society for Metals, Metals Park, Ohio, 1987, pp. 104-122.
124.
Uhlig,
H.
H., Environmental effects on properties of materials,
Mater. Protect. Pe@orm.,
July,
23-27 (1972).
125.
Gooch, T. G. Stress corrosion cracking of welded austenitic stainless steel,
Welding in the World,
22,
64-76 (1984).
126.
Copson, H.
R.,
Effects of composition on stress corrosion cracking of some alloys containing
nickel,
in
Physical Metallurgy of Stress Corrosion Fracture,
Interscience, New York, 1959, p.
247.
127.
Pitcher,
J.
H., Trends in CPI materials-Steels,
Chem. Eng.,
Deskbook Issue, 4 December, 39-42
(1972).
References
1077
128.
Espy, R. H., Coping with stress corrosion in stainless steel welds,
Welding Design
&
Fabrication,
October, 82-84 (1977).
129. Nishida, H., Nakamura,
K., and Takahashi, H., Intergranular stress corrosion cracking of sensitized
321
SS
tube exposed to polythionic acid,
Mater. Perform.,
April, 38-41 (1984).
130.
Protection of Austenitic Stainless Steels in Refineries Against Stress Corrosion Cracking by Use
of Neutralizing Solutions During Shutdown, NACE RP-01-70, National Association of Corrosion
Engineers, Houston, Tex.
131.
Fontana, M.
G.,
and Greene, N. D.,
Corrosion Engineering,
2nd edition, McGraw-Hill, New York,
1978.
132.
Bangs,
S.,
Gas turbine regenerator uses TIG, laser beam,
Welding Design
&
Fabrication,
March,
81-88 (1981).
133.
Jones, R.
L.,
Prevention of stress corrosion cracking in boiling water reactors,
Mater. PerJonn.,
February, 70-75 (1991).
134.
Gooch, T.
G.,
and Willingham, D. C., Weld decay in austenitic stainless steels, Welding Institute,
Abington Hall, Abington, Cambridge, UK.
135.
Steigenvald, R., Metallurgically influenced corrosion, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition, American Society for Metals, Metals Park,
Ohio,
1987, pp. 123-135.
136.
Fenn, R., Welding metallurgy of stainless steel,
Welding and Metal Fabrication,
October, 382-386
(1987).
137.
Banks, B., Process selection and filler materials for welding stainless steels,
Welding and Metal
Fabrication,
March, pp. 107-1
10
(1969).
138.
Allen, J.
S.,
Fabrication of heat exchangers
and
specialised vessels,
Welding and Metal Fabrica-
tion,
July, 240-245 (1968).
139.
Weymueller, C. R., Welding the austenitic steels,
Welding Design
&
Fabrication,
June, 82-87
(1978).
140.
Beigay,
J.
M., and Lovejoy, P. T., How to arc weld the stainless steels,
Welding Design
&
Fabrica-
tion,
August, 57-63 (198 1).
141.
Dulieu, D., Practical welding aspects of welding stainless steel,
Welding
&
Metal Fabrication,
July, 277-280 (1995).
142.
Castro, R., and Decadenet, J.
J.,
Welding Metallurgy
of
Stainless and Heat Resisting Steels,
Cam-
bridge University Press, London, 1975.
143.
Castner, H. R., What you should know about austenitic stainless steels,
Welding
J.,
April, 53-59
(1993).
144.
Smith, D. V., A practical approach to ferrite in stainless steel weld metal,
Welding
J.,
May, 57-60
(1989).
145.
Lundin, C. D., Lee, C. H., Menon, R., and
Osorio,
Weldability evaluation of modern 3 16 and 347
austenitic stainless steels: Part I-Preliminary results,
Welding
J.
35-s-46-s
(
1988).
146.
Kotecki, D. J., Standards and industrial methods for ferrite measurement,
Welding
in
rhe
World,
36, 161-169 (1995).
147a.
Kotecki, D. J., and Siewet, T. A., WRC-1992 constitution diagram for stainless steel weld metals:
A modification of the WRC-1988 diagram,
Welding
J.,
May, 171-s-178-s (1992).
147b.
Schaeffler, A. L., Constitution diagram for stainless steel weld metal,
Metal Prog.,
56(11), 68
(
1949).
147c.
DeLong, W. T., Ferrite in austenitic stainless steel weld metal,
Welding
J.,
53(7), 273-s-286-s
(1974).
148.
Datasheet no. 82a, Effects of residual, impurity, and microalloying elements on weldability and
weld properties,
Welding
J.,
December, 53-54 (1986). Excerpted from Effects of Residual, Impu-
rity, and Microalloying Elements on Weldability and Weld Properties, The Welding Institute,
1985; adapted by Hallock C. Campbell.
149.
Polland, B., The effects
of
minor elements on the welding characteristics of stainless steel,
Welding
J,
67(9), pp. 202-S-213-s (1988).
150.
Vackar, B.
K.,
Satisfying the codes, clean dry materials, good techniques
&
right chemistry,
Weld-
ing
Design
&
Fabrication,
June, 86-87 (1977).
I078
References
151.
Lula, R. A., Introduction, in
Source Book on the Ferritic Stainless Steels
(R. A. Lula, compiler),
American Society for Metals, Metals Park, Ohio, 1982, pp. ix-xii.
152. Nichol, T. J., Franson,
I.
A., and Moller, G.
E.,
Applications of new high chromium ferritic stain-
less steels in the chemical process industries, in
Corrosiod81,
Paper No. 117, NACE, 1981, pp.
357-40
I.
153.
Wock,
W.
C., Selecting steel tubing for high temperature service, in
Materials Engineering
I:
Selecting Materinls for Process Equipment
(K.
J.
McNaughton, ed.), McGraw-Hill, New York,
1980, pp. 252-255.
154. Davison, R.
M., and Steigenvald, R.
F.,
The new ferritic stainless steels,
Metul Prog.,
ZZ6(6)
40-46 (1979).
155.
Kaltenhauser, R. H., Improving the engineering properties of ferritic stainless steels,
Americtrn
Sociew for Metals, Metals Eng.
Q.,
II(2), 41-47 (1971).
156.
Demo, J. J.,
Structure, Constitution, and General Characteristics
of
Wrought Ferritic Stuinless
Steels,
ASTM STP 619, McGraw-Hill, New York, 1977.
157.
Paul Bond, A., Mechanisms
of
intergranular corrosion in ferritic stainless steels,
Trans. Metullurgi-
ccil
Socieh
of
AIME,
245(8),
2127-2134 (1969).
158.
Nichol, T. J., and Davis,
J.
A., Intergranular Corrosion Testing and Sensitization of Two High
Chromium Ferritic Stainless Steels, ASTM STP 656, American Society for Testing and Materials,
Philadelphia, 1978, pp. 179-196.
159.
Walker,
R.,
Duplex and high alloy stainless steels-corrosion resistance and weldability,
Muter.
Sci.
Technol.,
4,
78-84 (1988).
160.
Rayner, R.
E.,
Better metallurgy for process equipment,
Hydrocarbon Processing,
January, 53-60
(
1994).
161.
Stephenson, N., Welding status
of
duplex stainless steels for offshore application-Part
I
&
11,
Welding and Metal Fabrication,
June, 159-164, and July, 235-238 (1987).
162.
Farrar,
J. C. M., Developments in stainless steel welding consumables,
Welding
&
Metctl Fabricw
tion.
January, 27--32 (1990).
163.
Faucher, D.. and Gilbert, D., in
Proc.
of
International Conference on Duplex Stainless Steels
'86,
October 1986, Netherlands Institute voor lastechniek, The Hague, Netherlands.
164.
Tuthill, A. H., Usage and performance of nickel-containing stainless steels in both saline and
natural waters and brines,
Mater. Perform.,
July, 47-50 (1988).
165.
Mats,
L.,
Development of superaustenitic stainless steels,
Welding
in
the
World, 36,
55-63
(
1995
1.
166.
Rabensteiner,
G.,
The welding of fully austenitic stainless steels with high molybdenum contents,
Welding in the World,
27,
2-13 (1989).
167. Davison, R. M., and Redmond, J. D., Practical guide to using
6
MO austenitic stainless steels,
Mater. Perform.,
December, 39-43
(
1988).
168a.
Cary, H. B., Modern welding technology, in
Welding the Nonferrous Metals,
Prentice-Hall, Engle-
wood Cliffs, N.J., 1979, pp. 431-460.
168b.
Welding Kuiser Alirminum,
Kaiser Aluminum and Chemical Sales, Inc., Kaiser Center, Oakland.
Calif., 1967.
168c.
Welding Alcou Aluminurn,
Aluminum Company of America, Pittsburgh, Pa.
168e.
Welding Aluminurn,
Reynolds Metals Company, Richmond,
Va.
169.
Swaney,
W.,
Trace, D. E., and Winterbottom,
W.
L.,
Brazing aluminum automotive heat ex-
changers in vacuum: Process and materials,
Welding
J.,
May, 49-57 (1986).
170.
Taylor, M.
A.,
ed.,
Plate-Fin Heat Exchangers, Guide to Their Specification und
Use,
HTFS
(Harwell Laboratory), Oxon,
UK,
1980.
171.
Aluminum Brazing Handbook,
4th edition, Aluminum Association, Washington, D.C., 1990.
172. Irving,
B., Welding the four most popular aluminum alloys,
Welding
J.,
February,
5
1-55
(
1994).
173.
Corrosion behaviour, in
Aluminum: Properties and Physical Metallurgy
(J.
E.
Hatch, ed.), ASM,
Metals Park, Ohio, 1984, pp. 242-319.
174.
Pourbaix, M.,
Atlas
of
Electrochemical Equilibria
in
Aqueous Solution,
National Association
of
Corrosion Engineers, Houston, 1974.
References
I079
175.
Corrosion of aluminum and aluminum alloys, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edi-
tion, American Society for Metals, Metals Park, Ohio, 1987, pp. 583-609.
176. Lancaster, J. F., Fabrication of aluminum pressure vessels,
Welding and Metal Fabrication,
De-
cember, 455-459 (1958).
177.
Logan, H. L.,
The Stress Corrosion Cracking
of
Metals,
John Wiley
8i
Sons, New York, 1966.
178. Henthorne, M., Metals selection
for corrosion control,
Chem. Eng.,
6 March, 113-1
18
(1972).
179.
Darden, J. W., Triebel, C. A., Maes, J. P., and VanNeste,
W.,
MonoacidDiacid Combination as
Corrosion Inhibitors in Antifreeze Formulations, SAE 900804, pp. 135- 139.
180.
Schwerdtfeger, W.
J.,
Effects of Cathodic protection on the corrosion of an aluminum alloy,
J.
Res. Nut. Bureau Standards,
68C,
283 (1964).
181.
McGill, W. A., and Weinbaum, M. J., Aluminum vapour diffused steels resist refinery corrosion,
Mater. Protect. Pegorm.,
July, 28-32 (1972).
182.
Young, J. G., Quality control in aluminum welding,
Welding and Metal Fabrication,
January,
10-14, 62-67 (1964).
183.
Corrosion of copper and copper alloys, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition,
American Society for Metals, Metals Park, Ohio, 1987, pp. 610-640.
184.
Gaffoglio, C.
J.,
Copper takes a lot
of
heat,
Welding Design
&
Fabrication,
October, 90-99
(1979).
185.
Standards Handbook,
Wrought Products, Alloy Data/2, Copper Development Association, Inc.,
Greenwich, Conn., 1985.
186.
Peters, D.
T.,
and Kundig, K.
J.
A., Selecting copper and copper alloys-Part I: Wrought prod-
ucts
&
Part 11: Cast products,
Adv. Mater. Processes,
2,
26-32, and
6,
20-26 (1994).
187.
Condenser Tube Handbook,
Bridgeport Brass Company, UK.
188.
Copper in
Metals Handbook,
Vol. 2,
Nonferrous Metals,
9th edition, American Society for Metals,
Metals Park, Ohio, 1979.
189.
Baumann, G., Materials for tubes used in the manufacture of high pressure feed heaters,
Broicw
Botperi Re\,.,
54,
700-702 (1967).
190.
Cieslewicz, J. M., and Schweitzer, P. A., Copper and copper and copper alloys, in
Corrosion and
Corrosion Protection Handbook,
second edition (P. A. Schweitzer, ed.), Marcel Dekker. New
York, 1983, pp. 125-152.
191.
Tuthill,
A.
H.,
Guidelines for the use of copper alloys in seawater,
Mater. Perjorm.,
September,
12-22
(
1987).
192.
Thompson, D. H., How to prevent stress-corrosion cracking of copper alloys,
Chem.
Eng.,
Febru-
ary, 130-134 (1961).
193.
Syrett,
B.
C., and Coit,
R.
L., Causes and prevention of power plant condenser tube failures,
Mater. Pegorm.,
February, 44-49 (1983).
194.
Syrret, B. C., et al., Corrosion in fossil fuel power plants, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition, American Society for Metals, Metals Park, Ohio, 1987, pp. 985-1010.
195.
Spencer, E., The effect of material choice
on
heat transfer in steam surface condensers,
Mater.
Pegorm.,
March, 29-32 (1979).
196.
Woodward, A.
R.,
Howard, D. L., and Andrews, E. F. C., Condensers, pumps and cooling water
plant, in
Modern Power Station Practice,
Vol. C,
Turbines, Generators, and Associated Plant
(D.
J. Littler, E. J. Davies, H.
E.
Johnson, F. Kirkby, P. B. Myerscouh, and W. Wright, eds.), Pergamon
Press, New York.
197.
Hopkinson, B.
E.
Copper-Nickel Alloys for Feedwater Heater Service, ASME Publication
No.
62-WA.294, ASME, New York.
198.
Copper alloys, in
Welding Handbook,
Vol. 4,
Metals and Their Weldabilih,
seventh edition
(Kearns, ed.), American Welding Society, 1982, pp. 270-3 16.
199.
Dawson,
R.
J. C., Inert gas shielded arc welding of copper and copper alloy-Dissimilar metal
joint,
Welding and Metal Fabrication,
February, 60-66
(
1968).
200.
Dawson,
R.
J. C., Inert gas shielded arc welding of copper and copper alloys, Part 2,
Welding and
Metal Fabrication,
February, 59-63 (1967).
1080
References
201.
Dawson,
R.
J. C.,
Fusion Welding and Brazing
of
Copper and Copper
Alloys,
Newness-Butter-
worths, London, 1973.
202.
McDonald Scketly,
L.,
Arc welding of copper and copper alloys, in
Metals Handbook,
Vol.
6,
Welding, Brazing, and Soldering,
9th edition (E.
F.
Nippes, ed.), American Society for Metals,
Metals Park, Ohio, 1983, pp. 400-426.
203.
Callcut, V., and Brown, L., Joining copper and copper alloys,
Welding
&
Metal Fabrication,
June,
232-236 (1996).
204.
Modern methods for vessel
fabrication-Developments
at the Works of Daniel Adamson,
Welding
and Metal Fabrication,
January, 4-15 (1963).
205.
Campbell, E. J., Alloys for structural applications at subzero temperatures, in
Metals Handbook,
Vol. 3,
Properties and Selection: Stainless Steels, Tool Materials and Special Purpose Metals,
9th
edition, American Society for Metals, Metals Park, Ohio, 1980.
206.
Product Handbook,
Publication No. IAI-38, fourth edition, Inco Alloys International, Inc., Hunt-
ington, W. Va., 1988.
207.
Quick Reference Guide to Nickel and High Nickel
Alloys,
Inco Alloys International, Inc., Hunting-
ton, W. Va.
208.
High Performance
Alloys
for Thermal Processing,
Publication No. IAI-48- 1, fourth edition, Inco
Alloys International, Inc., Huntington, W. Va., 1988.
209.
Kiser,
S.
D., Sound welds in nickel alloys,
Welding Design
&
Fabrication,
October, 86-88 (1988).
210.
Conaway,
H.
R.,
Welding the nickel alloys, Part 1: Cleaning and joint design,
Welding Design
&
Fabrication,
February, 73-75 (1977).
21 1.
Conaway,
H.
R.,
Welding the nickel alloys, Part 2: SMAW and GMAW, Part 3: GTAW, SAW
and OAW, Part 4: Plasma welding, nickel overlays,
Welding Design
&
Fabrication,
March, 75-
79; April, 106-109; May, 70-73 (1977).
212.
Material Properties Handbook: Titanium
Alloys,
ASM International, Materials Park, Ohio.
213.
Schutz,
R.
W., and Thomas, E. D., Corrosion of titanium and titanium alloys, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition, American Society for Metals, Metals Park, Ohio, 1987, pp. 669-
706.
214.
Data sheet, summary table of titanium alloys,
Adv. Mater. Processes,
6,
123-126 (1994).
215.
Inskeep, J., Mcmaster, J. A., and Trumbell, C.
A.,
Move over for titanium,
Welding Design
&
Fabrication,
April, 88-94 (1977).
216.
Seagle,
S.
R.,
and Bruce, B. P. Titanium: Its properties and uses,
Chem. Eng.,
8
March, 11
1-
113
(1982).
217.
Titanium Fabricators Ltd.-A Profile, Welding and Metal Fabrication,
October 1988, pp. 346-
349.
218.
Schutz,
R.
W., A case for titanium’s resistance to microbiologically influenced corrosion,
Mater.
Perform.,
January, 58-61 (1991).
219.
TIMET Code Wedf Titanium Tubing,
TIMET, Denver, Colo.
220.
Jacobs,
R.
L.,
and McMaster, J. A., Titanium tubing: Economical solution to heat exchanger corro-
sion,
Mater. Protect. Perform.,
July, 33-38 (1972).
221.
Gleekman, L. W., Trends in CPI materials: Nonferrous metals-11,
Chem. Eng.,
Deskbook Issue,
4
December, 47-49 (1972).
222.
McMaster, J. A., Selection of titanium for petroleum refinery components.
Mater. Perform.,
April,
28-33 (1979).
223.
Cooley, J., How to weld titanium without a trailing shield,
Welding Design
&
Fabrication,
March,
65-66 (1982).
224.
Hull, W. G., Fusion welding of titanium and its alloys,
Welding and Metal Fabrication,
January,
24-28
(1961).
225.
Chevalier,
R.,
General methods for cleaning titanium,
Welding and Metal Fabrication,
April, 134
(
1974).
226.
Facts About Welding Titanium,
RMI
Titanium Company, Niles, Ohio.
227.
Crement, D. J., Narrow groove welding of titanium using the hot-wire gas tungsten arc process,
Welding
J.,
April, 71-76 (1993).
References
I081
228.
Ellis, M. B. D., and Gittos, M. F., Tungsten inert gas welding of titanium and its alloy,
Welding
&
Metal Fabrication,
January, 9-12 (1995).
229.
Baeslack, W. A., and Decker, D. W., Substructural characteristics in titanium alloy weldments,
Metal Trans., ZIA,
605-612 (1980).
230. Yau, T.-L., Zirconium,
in
Corrosion and Corrosion Protection Handbook,
second edition (P. A.
Schweitzer, ed.), Marcel Dekker, New York, 1983, pp. 231-282.
231. Lacy,
C. E., and Keeler, J. H., Zirconium-Fabrication techniques and alloys development,
Mech.
Eng.,
October, 875-878 (1955).
232.
Cox, F. G., Zirconium,
Welding and Metal Fabrication,
October, 358-365
(
1958).
233.
Webster, R. T., and Yau, T.-L., Zirconium in sulfuric acid applications,
Mater. Perform.,
February,
21-25 (1986).
234.
Rollason, E. C., Weldiing of zirconium,
Welding and Metal Fabrication,
July, 230-234
(
1956).
235.
Bums, R. H., and Prabhat,
K.,
Conquer corrosion in harsh environments with tantalum,
Chem.
Eng. Prog.,
March, 32-35 (1996).
236.
Schweitzer, P. A., Tantalum, in
Corrosion and Corrosion Protection Handbook,
second edition
(P. A. Schweitzer, ed.), Marcel Dekker, New York, 1983, pp. 213-230.
237.
Keeler, J. H., Four refractory metals-W, Ta, Cb and MO,
Mech. Eng.,
November, 41-45 (1965).
238.
Bishop, C.
R.,
and Stem, M., Hydrogen embrittlement of tantalum in aqueous media,
Corrosion,
17,
379-385 (1961).
239.
Schussier, M., Tantalum-Its properties and applications for the chemical industry,
Refractory and
Hard Metals,
June (1983).
240.
Hampel, C. A., Corrosion resistance of titanium, zirconium and tantalum used for chemical equip-
ment,
Corrosion,
17,
9-17 (1961).
241.
Yan, T.-L., and Bird, K. W., Know which reactive and refractory metals work for you,
Chem.
Eng. Prog.,
88(2), 65-69 (1992).
242.
Gleekman, L. W., Trends in CPI materials: Nonferrous metals-I,
Chem. Eng.,
Deskbook Issue,
12 October, 111-118 (1970).
243.
Sayers, J.
A.,
Trends in CPI materials: Brittle materials,
Chem. Eng.,
Deskbook Issue, 4 December,
5
1-56 (1972).
244.
Hills, D. E. G., Graphite heat exchangers-I,
Chem. Eng.,
23 December, 80-83 (1974).
245.
Hills, D. E. G., Graphite heat exchangers-11,
Chem. Eng.,
20 January, 116-119 (1975).
246.
Schley, J. R., Impervious graphite for process equipment,
Chem. Eng.,
18 February, 144-150
(
1974).
247.
Muoio, J. M., Glass as a material of construction for heat transfer equipment, in
Industrial Heat
Exchangers Conference Proceedings
(A.
J. Hayes,
W.
W. Liang,
S.
L.
Richlen, and E.
S.
Tabb,
eds.), American Society for Metals, Metals Park, Ohio, 1985, pp. 385-390.
248.
Perry, R. H., and Chilton,
C.
H.,
Chemical Engineering Handbook,
fifth edition, McGraw-Hill,
New York, 1973.
249.
Mejzak, G. J., An introduction of glass for the chemical process industries, in
ASME National
Congress on Pressure Vessel and Piping Technology,
1983.
250.
0-I/Schott Process Systems, Heat Exchanger Bulletin 01s-HE- 1 182, 1984.
251.
Lederman,
S.,
Types and prevention of glass lined equipment failures,
Mater. Perform.,
March,
34-41 (1983).
252.
Wenner, C. W., Jr., Corrosion-free heating and cooling using Teflon heat exchangers,
Mater.
Perform.,
September, 55-58 (1988).
253.
Ametek Heat Exchangers of Teflon,
M/s.
Ametek, Haveg Division, USA.
254.
Lehman, R. L., Premier on engineering ceramics,
Adv. Mater. Processes,
June, 31-41 (1992).
255.
McDonald, C. F., The role of the ceramic heat exchanger in energy and resource conservation,
Trans. ASME,
J.
Eng. Power,
102,
303-315 (1980).
256.
Schwartzberg, R.
F.,
Selecting structural materials for cryogenic service, in
Source Book on Mate-
rials Selection,
Vol. 1 (R. B. Guina, compiler), ASM, Metals Park, Ohio, 1977, pp. 25-30.
257.
Marshall, E. G., Steels for low temperature service, in
Source Book on Materials Selection,
Vol.
1
(R. B. Guina, compiler), ASM, Metals Park, Ohio, 1977, pp. 216-220.
I082
References
258.
Vanderbeck,
R.
W., Special carbon steels-Tough ductile at subzero temperature,
Chem.
Eng.,
May,
103-106 (1960).
259.
Aluminum in hot pursuit of cryogenics,
Welding Design
&
Fabrication,
September,
45-49
(
1974).
260.
Johnson, E. W., Aluminum alloys,
Chem. Eng.,
8
August,
133-135 (1960).
261.
Welding of stainless steels for cryogenic application,
Welding in the World,
30,
100-107 (1992).
262.
Fabrication of cryogenic plant,
Welding and Metal Fabrication,
March,
84-89
(
1969).
263.
Nippes, E. F., and Balaguer, J. P.,
A
study of weld heat affected zone toughness of
9%
nickel
steel,
Welding
J.,
September,
237-s-243-s (1986).
264.
Fieldhouse,
A.
B., New electrode for welding
9%
nickel steel,
Welding and Metal Fabrication,
April,
149-150 (1964).
265.
Johnson, R. J., Nickel steel alloys for liquids at
320°F,
Chem. Eng.,
July,
115-118 (1960).
266.
Tharby,
R.
H., Welding consumables for
9%
nickel steel,
Welding and Metal Fabrication,
Febru-
ary,
51-61 (1973).
267.
Thorneycroft, D. R., and Heath, D. J., Further aspects of the welding of
9%
nickel steel,
Welding
and Metal Fabrication,
February,
59-70 (1963).
268.
Pozzolini, P. F., The role of
9%
nickel steel in the transport of LNG,
Welding and Metal Fnbricu-
tion,
February,
40-46 (1973).
269.
Coulson, K. J., Shop manufacturing experience with
9%
nickel steel,
Welding and Metal Fabricci-
tion,
February,
47-50 (1973).
270.
Machin, R., Welding aspects of
9%
nickel steel,
Welding and Metal Fabrication,
July,
266-269
(
1966).
271.
Watanabe, M., Tanaka, J., and Watanabe, I., Ferritic filter for gas shielded metal arc welding
9%
nickel steel,
Welding and Metal Fabrication,
May,
167-176 (1973).
272.
Operution Cryogenics,
International Nickel Co., Inc., Chicago Bridge
&
Iron Co., and United
Steels Corp, Publication AUDCO
A-61.
273.
Jordan, D. E., High strength filler material for welding
9%
nickel steel,
Welding and Metal Fabri-
cation,
August,
335-339 (1967).
274.
McHenry, H. T., The properties of austenitic stainless steels at cryogenic temperatures, in
Austen-
itic Steels at
LOW?
Temperature,
Plenum Press, New York,
1983.
275.
Ogawa, T., and Koseki, T., Weldability of newly developed austenitic alloys for cryogenic service:
Part 11. High nitrogen stainless steel weld metal,
Welding
J.,
67,
8-s-17-s (1988).
276.
Ogawa, T., and Koseki, T., Weldability of newly developed austenitic alloys for cryogenic service:
Part I. Up-to-date overview of welding technology,
Welding
J.,
66,
332-s-34
1
-s
(1
987).
277.
Lancaster, J.
F.,
The Metallurgy of Welding, Brazing and Soldering,
American Elsevier, New
York,
1965.
278.
Charles, J., Gagnepain,
J.
C., Dupoiron, F., Jobard D., and Soulignac, P., Austenitic-Ferritic Stain-
less
Steels and Clad Plates: Properties and Applications to Pressure Vessels, WRC Bull.
374,
pp.
25-37.
279.
Gleekman, L. W., Trends in CPI materials: Nonferrous metals-11, in
Materials Engineering
I:
Selecting Materials for Process Equipment
(K. J. McNaughton, ed.
),
McGraw-Hill, New York,
1980,
pp.
92-94.
280.
Newcombe,
G.,
The bimetal concept,
Welding and Metal Fabrication,
November,
379-406
(
1974).
281.
Firth,
K.,
and Heath, D. J., Nickel alloys provide protective lining and overlays,
Welding and
Metal Fabrication,
April,
195-203 (1980).
282.
Bush, A. F., and Cohin, P., The successful application of the strip cladding process with austenitic
strips,
Welding and Metal Fabrication,
June,
234-241 (1969).
283.
Mallya, U. D., and Srinivas,
H.
S.,
Effect of magnetic steering of the arc on clad quality in
submerged arc strip cladding,
Welding
J.,
July,
289-s-293-s
(
1993).
284.
Devletian, J. H., Koch,
A.,
and Buckley,
E.
N., Unique application introduces electroslag cladding
to US industry,
Welding
J.,
January,
57-60 (1992).
285.
Marshall, A.
B.,
Jordan, M. F., and Aston, J.
L.,
Stainless steel strip cladding,
Welding and Metal
Fubrication,
August,
292-293 (1973).
References
1083
286.
Oh, Y. K., and Devletian, J. H., Electroslag strip cladding of stainless steel with metal powder
additions,
Welding Journal,
January, 37-44
(
1992).
287.
Banker, J. G., Try explosion clad steel for corrosion protection,
Chem. Eng. Prog.,
July,
40-44
(1996).
288.
Hix Hugh, B., Explosion bonded metals offer diversification in vessel design,
Mater. Protect.
Pegorm.,
December, 28-31 (1972).
289.
Hardwick, R., Methods for fabricating and plugging of tube to tubesheet joint by explosion weld-
ing,
Welding,
J.,
April, 238-244 (1975).
290.
Linse, V.
D.,
and Temple, P.
I.,
Explosion welding, in
Welding Hand Book,
Vol. 2, eighth edition,
1991, pp. 766-781.
291.
Explosion welding, in
Metals Handbook,
Vol. 6,
Welding, Brazing, and Soldering,
9th edition
(E.
F. Nippes, ed.), American Society for Metals, Metals Park, Ohio, 1983, pp. 705-718.
292.
Johnson, W. R., Explosive welding: Plugs into heat exchanger tubes,
Welding
J.,
January, 22-32
(1971).
293.
Peacock, G. A., Fabrication of thick plates,
Welding and Metal Fabrication,
June, 242-252 (1963).
294.
Ellis,
D.,
Fabrication in clad steels,
Welding and Metal Fabrication,
September, 359-365
(
1967).
295.
Welding Handbook,
Vol.
4,
Metals and Their Weldability,
seventh edition (W. H. Kearns, ed.),
AWS, Miami, Fla., 1982, Chapter 12.
296.
Recommendation of PWHT of welded joints in steel pressure vessels and other heavy duty struc-
tures, by Joint Working Group, IIW Commissions IX and X,
Welding
in
the World,
29,
341-362
(
199 1).
297.
Ellis, D. J., and Gifford, A. F., Application of electroslag and consumable guide welding,
Welding
and Metal Fabrication,
April, 1 12- 1 19
(
1973).
298.
Ricci, W.
S.,
and Eagar, T. W.,
A
parametric study of the electroslag welding process,
Welding
J.,
December, 397-s-405-s (1982).
299. Carpenter,
0.
R., and Floyd, C., Heat treatment of carbon and low alloy pressure vessel steel,
Welding
1.
(1957).
300. Watson,
S.
J., Post weld treatment of welded units for the relief of stress,
Welding and Metal
Fabrication,
September, 3 18-327 (1958).
301.
Ohshita,
S.,
Yurioka, N., Mori, N., and Kimura, T., Prevention of solidification cracking in very
low carbon steel welds,
Welding
J.,
June, 129-s-136-s (1983).
302.
ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Pressure Vessels, The American
Society of Mechanical Engineers, New York, 1992.
303.
Carpenter, D. D., A guide for determining post weld heat treatment requirements for ASME Code
Section VIII pressure vessels,
Trans. ASME,
J.
Pressure Vessel Technol.,
106,
115-123 (1984).
Bibliography
1.
Materials Engineering, Part I: Selecting Materials for Process Equipment: Part 11: Controlling Cor-
rosion
in
Process Equipment
(K. J. McNaughton, ed.), McGraw-Hill, New York, 1980.
2.
Corrosion of nickelbase alloys, in
Metals Handbook,
Vol. 13,
Corrosion,
9th edition, American
Society for Metals, Metals Park, 1987, Ohio, pp. 641-657.
3.
Welding Handbook,
Vol. 1,
Welding Technology,
Vol. 2,
Welding Processes,
Vol. 3,
Materials and
Application,
eighth edition
(L.
P. Connor, ed.), American Welding Society, Miami, Fla., 1987.
4.
Weldments, brazed assemblies, and soldered joints, in
Metals Handbook,
Vol. 17,
Nondestructive
Evaluation and Quality Control,
ninth edition, American Society for Metals, Metals Park, Ohio,
1989, pp. 582-609.
5.
Metals Handbook,
Vol. 1,
Properties and Selection: Iron, Steels, and High Per$ormance
Alloys,
10th
edition, American Society for Metals, Metals Park, Ohio, 1990.
6.
Metals Handbook,
Vol. 2,
Properties and Selection: Nonferrous Alloys, and Special Purpose Materi-
als,
10th edition, American Society for Metals, Metals Park, Ohio, 1992.
7.
Cary, H.
B.,
Modern Welding Technology,
Prentice Hall, Englewood Cliffs, N.J., 1979.