Автоматизация
  • формат pdf
  • размер 2.97 МБ
  • добавлен 07 марта 2009 г.
Pelz G. Mechatronic systems. Modelling and Simulation with HDLS
Heidelberg, 2001. - 234 p.
Мехатронные системы. Математическое описание. Примеры. Моделирование. Микромехатроника.
На англ. языке.
Похожие разделы
Смотрите также

Adolfsson J., Karls J. (eds.) Mechatronics '98

  • формат pdf
  • размер 85.36 МБ
  • добавлен 03 декабря 2011 г.
Pergamon, 1998. 940 p. ISBN-10:0080433391 Mechatronics, a synergistic combination of mechanical, electronic and computing engineering technologies, is a truly multidisciplinary approach to engineering. New products based on mechatronic principles are demonstrating reduced mechanical complexity, increased performance and often previously impossible capabilities. This book contains the papers presented at the UK Mechatronics Forum's 6th Internati...

Alciatore D.G., Histand M.B. Introduction to Mechatronics and Measurement Systems

  • формат pdf
  • размер 37.2 МБ
  • добавлен 15 октября 2011 г.
Fourth Edition. McGraw-Hill, 2011. 573 p. ISBN:978-0-07-338023-0 Introduction to mechatronics and measurement systems provides comprehensive and accessible coverage of the evolving field of mechatronics for mechanical, electrical and aerospace engineering majors. The author presents a concise review of electrical circuits, solid-state devices, digital circuits, and motors- all of which are fundamental to understanding mechatronic systems. Mechat...

Bichop R.H. (Ed.) Mechatronic Systems, Sensors, and Actuators: Fundamentals and Modeling

  • формат pdf
  • размер 23.23 МБ
  • добавлен 19 апреля 2011 г.
2 ed. CRC Press, 2007. 712 p. ISBN:0849392586 The first comprehensive and up-to-date reference on mechatronics, Robert Bishop's The Mechatronics Handbook was quickly embraced as the gold standard in the field. With updated coverage on all aspects of mechatronics, The Mechatronics Handbook, Second Edition is now available as a two-volume set. Each installment offers focused coverage of a particular area of mechatronics, supplying a convenient an...

Bishop R.H. (ed.) Mechatronic System Control, Logic, and Data Acquisition (The Mechatronics Handbook)

Справочник
  • формат pdf
  • размер 25.65 МБ
  • добавлен 15 ноября 2011 г.
Second Edition. CRC Press, 2008. 704 p. ISBN:0849392608. The first comprehensive and up-to-date reference on mechatronics, Robert Bishop's The Mechatronics Handbook was quickly embraced as the gold standard in the field. With updated coverage on all aspects of mechatronics, The Mechatronics Handbook, Second Edition is now available as a two-volume set. Each installment offers focused coverage of a particular area of mechatronics, supplying a co...

Bradley D., Russell D.W. (eds.) Mechatronics in Action: Case Studies in Mechatronics - Applications and Education

  • формат pdf
  • размер 10.46 МБ
  • добавлен 11 декабря 2011 г.
Springer, 2010. 281 p. ISBN:1849960798 Mechatronics in Action’s case-study approach provides the most effective means of illustrating how mechatronics can make products and systems more flexible, more responsive and possess higher levels of functionality than would otherwise be possible. The series of case studies serves to illustrate how a mechatronic approach has been used to achieve enhanced performance through the transfer of functionality...

Giurgiutiu V., Lyshevski S.E. Micromechatronics. Modeling, Analysis, and Design with Matlab

  • формат pdf
  • размер 23.61 МБ
  • добавлен 22 января 2010 г.
2009. This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if...

Hargin B. Mechatronic system integration and design

Статья
  • формат pdf
  • размер 878.4 КБ
  • добавлен 22 января 2011 г.
Aerospace whitepaper. Mentor Graphics Corp. 5 p. На англ. языке. В статье отмечена проблема, заключающаяся в трудности совместного использования цифровых и аналоговых устройств в мехатронных системах. Её предлагается решить с помощью обучения инженеров проектированию мехатронных систем, организации междисциплинарной коммуникации, аккуратного разделения этих систем и использования моделирования (например, в среде SystemVision).

Kaltenbacher M. Numerical Simulation of Mechatronic Sensors and Actuators

  • формат pdf
  • размер 7.19 МБ
  • добавлен 16 декабря 2011 г.
2nd Edition. Springer, 2007. 446 p. ISBN:978-3-540-71359-3 This is the second, enhanced and updated edition of an essential text for students of mechatronics. It covers both the detailed physical modeling of mechatronic systems and their precise numerical simulation using the Finite Element (FE) method. New material includes a section discussing locking effects as occurring in the numerical computation of thin mechanical structures as well as a...

Mechatronic systems : fundamentals

  • формат pdf
  • размер 46.82 МБ
  • добавлен 09 февраля 2010 г.
Apart from any fair dealing for the purposes ofresearch or private study, or criticism o. review, as permitted under the Copyright, Designs and patents Act 1988, this publication rnay only be reproduc€d, stored or transmitted, in any form or by any means, with the prior permission in writing ofthe publish€rs, or in the case of reprographic reproducrion in accord;nce wirh the termsoflicences issu€d bythe Copyright Licensing ASency. Enquiries con€e...

Shetty D., Kolk R.A. Mechatronics System Design

  • формат pdf
  • размер 20.27 МБ
  • добавлен 15 октября 2011 г.
Second Edition. Cengage Learning, 2011. 528 p. ISBN-13:978-1-4390-6199-2, ISBN-10:1-4390-6199-8. This text by Shetty and Kolk, blends the pertinent aspects of mechatronics-system modeling, simulation, sensors, actuation, real-time computer interfacing, and control-into a single unified result suitable for use in the college-level mechatronic curriculum. Students are introduced to all the topics needed to develop a good understanding of the basi...