Bhadeshia H.K.D.H. Bainite In Steels. Transformations, Microstructure and Properties
Подождите немного. Документ загружается.
Ko, T. and Cottrell, S. A. JISI 172 (1952) 307±313.
Kocks, U. F. Phil. Mag. 13 (1966) 541.
Kocks, U. F. Can. J. Phys. 45 (1967) 737.
Kocks, U. F., Argon, A. S. and Ashby, M. F. Prog. Mater. Sci. 19 (1975) 1.
Koistinen, D. P. Trans. ASM 50 (1958) 227.
Korenko, M. K. PhD thesis entitled `Martensitic Transformations in High Magnetic
Fields', Massachusetts Institute of Technology (1973).
Kostic, M. M., Hawbolt, E. B. and Brown, L. C. Metall. Trans. 7A (1976) 1643.
Kostic, M. M., Hawbolt, E. B. and Brown, L. C. Metall. Trans. 10A (1979) 165.
Kozasu, I., Suzuki, H., Yamada, M. and Tagawa, H. Research on Chrome±Moly Steels,
MPC-21, American Society of Mechanical Engineers, New York (1984) 53±76.
Krivoglaz, M. A. and Sadovsky, V. D. Fiz. Met. Metalloved. 18 (1964) 502.
Kriesement, O. and Wever, F. Mechanism of Phase Transformations in Metals, Institute of
Metals, Monograph and Rep. Ser. No. 18, London (1956) 253.
Krishnadev, M. R. and Ghosh, R. Metall. Trans. A 10A (1979) 1941±1944.
Kubaschewski, O. and Evans, E. Li. Metallurgical Thermochemistry, Pergamon Press,
Oxford, UK (1950).
Kunitake, T. Reactor Steel Studies, Cr±Mo Steels Research in Japan, ed. K. Ono (1971)
Quoted in Lundin et al., 1982.
Kunitake, T., Terasaki, F., Ohmori, Y. and Ohtani, H. Iron and Steel (December 1972)
647±653.
Kurdjumov, G. V. Trans. AIMME (Iron and Steel Div.) 103 (1933) 253±255.
Kurdjumov, G. V. and Sachs, G. Z. Phys. 64 (1930) 325.
Lacher, J. R. Proc. Cambridge Phil. Soc. 33 (1937) 518.
Lai, G. Y. Metall. Trans. A 6A (1975) 1469.
Lancaster, J. F. Metallurgy of Welding, 4th edition, Allen and Unwin, London (1986).
Lange, H. and Mathieu, K. Mitt. K. W. I. Eisenforchung 20 (1938) 125.
Langer, E. W. Metal Science Journal 2 (1968) 59.
Langer, J. S. and Muller±Krumbhaar Acta Metall. 26 (1978) 1681±1687.
Langford, G. and Cohen, M. Trans. Am. Soc. Met. 62 (1969) 625.
Langford, G. and Cohen, M. Metall. Trans. 1 (1970) 1478.
Langford, G. and Cohen, M. Metall. Trans. A 6A (1975) 901.
Larn, R. H. and Yang, J. R. Materials Science and Engineering A A264 (1999)
139±150.
Larn, R. H. and Yang, J. R. Materials Science and Engineering A A278 (2000)
278±291.
Lau, T. W., Sadowsky, M. M., North, T. H. and Weatherly, G. C. Welding Metallurgy of
Structural Steels, ed. J. Y. Koo, TMS±AIME, Warrendale, Penn., USA (1987) 349±365.
Lau, T. W., Sadowsky, M. M., North, T. H. and Weatherly, G. C. Materials Science and
Technology 4 (1988) 52±61.
Laverroux, M. and Pineau, A. Scripta Metall. 8 (1974) 351±356.
Law, N. and Edmonds, D. V. Metall. Trans. A 11A (1980) 33.
Leber, H., Luthy, H. and Form, W. Fundamentals of Microalloying Forging Steels, eds. G.
Krauss and S. K. Banerji, The Metallurgical Society of the AIME, Warrendale,
Pennsylvania, USA (1987) 189±206.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 427 411-440
427
Leber, H. J., Garcia, C. I., Palmiere, E. J. and DeArdo, A. J. Processing, Microstructure and
Properties of HSLA Steels, ed. A. J. DeArdo, The Minerals, Metals and Materials
Society, Warrendale, Pennsylvania (1988) 425±437.
Lee, Y. J. PhD Thesis, Assessment of Creep Damage in Weldments of 1Cr±0.5Mo Steel,
Monash University, Clayton, Victoria, Australia (1989).
Lee, H. J., Spanos, G., Shi¯et, G. J. and Aaronson, H. I. Acta Metall. 36(1) (1988)
1129±1140.
Leont'yev, B. A. and Kovalevskaya, G. V. Fiz. Metall. Metalloved. 38 (1974) 1050.
Leslie, W. C. Physical Metallurgy of Steels, McGraw-Hill Kogakusha, Tokyo, Japan (1982).
Lewis, D. Journal of the Iron and Steel Institute 119 (1929) 427.
Li, C. Y., Blakely, J. M. and Feingold, A. H. Acta Metall. 14 (1966) 1397.
Lifshitz, I. H. and Slyozov, V. Z. Phys. Chem. Solids 19 (1961) 35.
Lin, M. Research Proposal for PhD Thesis entitled `Autocatalytic Kinetics of
Martensitic Transformations', Massachusetts Institute of Technology (1987) private
communication G. B. Olson.
Linaza, M. A. Romero, J L., Rodriguez-Ibabe, J. M. and Urcola, J. J. Scripta Metallurgica
and Materialia 29 (1993) 1217±1222.
Llopis, A. M. PhD Thesis, referred to in E. R. Parker, Metall. Trans. 8A (1977) 1025.
Lorenz, K. and Duren, C. Steels for Line Pipe and Pipeline Fittings, Metals Society,
London (1983) 322.
Lonsdale, D. and Flewitt, P. E. J. Metall. Trans. A 9A (1978) 1619±1623.
Lonsdale, D. and Flewitt, P. E. J. Materials Science and Engineering 39 (1979) 217±229.
Lu, G.-Z., Zhang, H. Wear of Materials, ed. K. C. Ludema, Amer. Soc. of Mech.
Engineers, New York (1989) 225±231.
Lundin, C. D., Kruse, B. J. and Pendley, M. R. Bulletin 277 of the Welding Research
Council, United Engineering Center, New York (May 1982) 1±27.
Lundin, C. D., Kelly, S. C., Menon, R. and Kruse, B. J. Bulletin 315 of the Welding
Research Council, United Engineering Center, New York (June 1986) 1±66.
Lyman, T. and Troiano, A. R. Trans. AIME 162 (1945) 196.
Lyman, T. and Troiano, A. R. Trans. ASM 37 (1946) 402±448.
Mabuchi, H., Uemori, R. and Fujioka, M. ISIJ International 36 (1996) 1406±1412.
Mack, C. Proc. Cambridge Phil. Soc. 52 (1956) 246.
Magee, C. L. Phase Transformations, ASM, Metals Park, Ohio (1) (1970) 15±156.
Magee, C. L. Metallurgical Transactions 2 (1971) 2419±2430.
Maier, Ch., Blaschko, O. and Pichl, W. Physical Review B 55 (1995) 113±116.
Maki, T., Shimooka, S., Arimoto, T. and Tamura, I. Trans. JIM 14 (1973) 62±67.
Maki, T., Shimooka, S., Fujiwara, S. and Tamura, I. Trans. JIM 16 (1975) 36±41.
Maki, T. and Tamura, I. Proceedings of an International Conference on Martensitic
Transformations, ICOMAT 86, Kyoto, Japan Institute of Metals (1986) 963±970.
Malecki, P. Private communication on a paper to be published in the proceedings of
the 8th International Conference on Metallography, Leoben, Austria (1990).
Marder, A. R. and Krauss, G. Trans. ASM 60 (1967) 651.
Marschall, C. W., Hehemann, R. F. and Troiano, A. R. Trans. ASM 55 (1962) 135.
Masuyama, F., Komai, N., Yokoyama, T., Yamamoto, S., Miyata, K. and Igarashi, M.
JSME International Journal 41 (1998) 1098±1104.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 428 411-440
428
Matas, S. J. and Hehemann, R. F. Nature 187 (1960) 685±686.
Matas, S. J. and Hehemann, R. F. Trans. Met Soc. AIME 221 (1961) 179±185.
Matsuda, A. Tetsu-to
Â
-Hagane 56 (1970) 1428.
Matsuda, S., Inoue, T. and Ogasaswara, M. Trans. Japan Inst. Metals 9 (1968) 343.
Matsuda, S., Inoue, T. and Ogasaswara, M. Trans. ISIJ 12 (1972) 325.
Matsuda, S. and Okumura, N. Trans. ISIJ 18 (1978) 198±205.
Matsuzaki, A., Bhadeshia, H. K. D. H. and Harada, H. G. R. Speich symposium, Iron and
Steel Society, AIME, Warrendale, PA, USA (1992) 47±52.
Matsuzaki, A. and Bhadeshia, H. K. D. H. Materials Science and Technology 15 (1999)
518±522.
McCutcheon, D. B., Trumper, T. W. and Embury, J. D. Revue de Metallurgie (Feb. 1976)
143±174.
McEvily, A. J. and Magee, C. L. Low Alloy Steels, Iron and Steel Institute, London (1968)
111±117.
McGrath, J. T., Chandel, R. S., Orr, R. F. and Gianetto, J. A. Canadian Metall. Quarterly
28 (1989) 75±83.
McMahon Jnr., C. J., Cohen, M. Acta Metall. 13 (1965) 591.
McRobie, D. E. and Knott, J. F. Mater. Sci. Tech. 1 (1985) 137.
Meggers, K., Priesmeyer, H. G., Trela, W. J., Bowman, C. D. and Dahms, M. Nuclear
Instruments and Methods in Physics Research 88 (1994) 423±429.
Mehl, R. F. Hardenability of Alloy Steels, ASM, Cleveland, Ohio, USA (1939) 1.
Mehl, R. F. JISI 159 (1948) 113±129.
Mendiratta, M. G., Sasser, J. and Krauss, G. Metall. Trans. A 3 (1972) 351±353.
Miihkinen, V. T. T. and Edmonds, D. V. Mat. Sci. and Tech. 3 (1987a) 422±431.
Miihkinen, V. T. T. and Edmonds, D. V. Mat. Sci. and Tech. 3 (1987b) 432±440.
Miihkinen, V. T. T. and Edmonds, D. V. Mat. Sci. and Tech. 3 (1987c) 441±449.
Miller, R. F., Benz, W. G. and Unverzagt, W. E. Proc. ASTM 40 (1940) 771±781.
Mills, A. R., Thewlis, G. and Whiteman, J. A. Mat. Sci. and Tech. 3 (1987) 1051±1061.
Minote, T., Torizuka, S., Ogawa, A. and Niikura, M. ISIJ International 36 (1996)
201±207.
Mintz, B. and Wilson, D. V. Acta Metall. 13 (1965) 947.
Miyata, K., Igarashi, M. and Sawaragi, Y. ISIJ International 39 (1999) 947±954.
Moore, D. J., Rouns, T. N. and Rundman, K. B. J. Heat Treating 4 (1985a) 7.
Moore, D. J., Rouns, T. N. and Rundman, K. B. AFS Transactions 93 (1985b) 705±718.
Moore, D. J., Rouns, T. N. and Rundman, K. B. AFS Transactions 94 (1986) 255±264.
Moore, D. J., Rouns, T. N. and Rundman, K. B. AFS Transactions 95 (1987) 765±773.
Morgan, E. R., Dancy, T. E. and Korchynsky, M. Blast Furnace and Steel Plant 53 (1965)
921±929.
Mori, N., Homma, H., Okita, S. and Wakabayashi, M. International Institute for Welding,
Document IX±1196±80 (1980).
Morikawa, H. and Hasegawa, T. Accelerated Cooling of Steel, ed. P. D. Southwick, TMS±
AIME (1985) 83±96.
Morniroli, J., Grosse, E. and Gantois, M. Phil. Mag. A 48 (1983) 311.
Mostert, R. J. and van Rooyen, G. T. Specialty Steels and Hard Materials, Pretoria, S.
Africa, Pergamon Press, Oxford (1982) 229.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 429 411-440
429
Mujahid, S. A. and Bhadeshia, H. K. D. H. Acta Metall. et Mater. 40 (1992)
389±396.
Mujahid, S. A. and Bhadeshia, H. K. D. H. Acta Metall. et Mater. 41 (1993)
967±973.
Murakami, T. and Imai, Y. Sci. Rep. Res. Inst. Tohoku Univ., Series A 1 (1949)
87±92.
Murphy, M. C. and Branch, G. D. JISI 206 (1969) 1347±1364.
Murphy, M. C. and Branch, G. D. JISI 209 (1971) 546±561.
Mutiu, T. A., Kinderman, A. J. and Bernstein, I. M. The Hot Deformation of Austenite, ed.
J. B. Ballance, T.M.S.±A.I.M.E., New York, USA (1977) 410±427.
Mutton, P. J. M. AS. Thesis, University of Melbourne (1985) Referred to by Sawley et al.
(1987).
Myers, E. J. Proc. First Int. Cong. in Stereology, Vienna Medical Academy (1953) 15/1,
15/7.
Myers, J., Willoughy, G. and Ham, R. K. Central Electricity Research Laboratories Report
RD/L/R 1514, Leatherhead, Surrey, England (1968).
Nabarro, F. R. N. Proc. Roy. Soc. A381 (1982) 285.
Nagakura, S., Suzuki, T. and Kusunoki, M. Trans. JIM 22 (1981) 699±709.
Nagakura, S., Hirotsu, Y., Kusunoki, M., Suzuki, T. and Nakamura, Y. Metall. Trans. 14
(1983) 1025±1031.
Nakamura, T., Mikami, T. and Nagakura, S. Trans. JIM 26 (1985) 876±885.
Nakamura, T. and Nagakura, S. International Conference on Martensitic Transformations ±
ICOMAT±86, Japan Institute of Metals (1986) 386±391.
Nakasugi, H., Matsuda, H. and Tamehiro, H. Alloys for the 1980's, Climax Moly-
bdenum, Ann Arbor, Michigan, USA (1980) 213.
Nakasugi, H., Matsuda, H. and Tamehiro, H. Steels for Line Pipe and Pipeline Fittings,
Metals Society, London (1983) 90.
Nam, W. J. ISIJ International 39 (1999) 1181±1187.
Nath, B. Int. Conf. on Welding Technology of Energy Applications, eds. S. A. David and G.
M. Slaughter, Oak Ridge National Labs. TN, USA (1982) 1±25.
Nath, B. 2nd Int. Conf. on Creep and Fracture of Engineering Materials and Structures,
Pineridge Press Ltd., Swansea, UK (1984) 827±838.
Naylor, J. P. Metall. Trans. A 10 (1979) 861.
Naylor, J. P. and Krahe, P. R. Metall. Trans. 5 (1974) 1699±1701.
Naylor, J. P. and Krahe, P. R. Metall. Trans. 6A (1975) 594±598.
Nehrenberg, A. E. J. of Metals 188 (1950) 162±180.
Nemoto, M. High Voltage Electron Microscopy, Academic Press, New York, NY (1974)
230±234.
Nilan, T. G. Trans. Met Soc. AIME 239 (1967) 898±909.
Nishiyama, Z. Sci. Rep. Tohoku Univ. 23 (1934) 325.
Nishioka, K. and Tamehiro, H. Microalloying '88: International Symposium on Applica-
tions of HSLA Steel, Chicago, Illinois (September 1988) 1±9.
Norstro
È
m, L.-A. Scandinavian Journal of Metallurgy 23 (1976) 159±165.
North, T. H., Mao, X. and Nakagawa, H. The Metallurgy, Welding and Quali®cation of
Microalloyed (HSLA) Steel Weldments, American Welding Society (1990) 219±248.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 430 411-440
430
Nutting, J. Advanced Heat Resistant Steels for Power Generation, IOM Communications,
London, eds. R. Viswanathan and J. Nutting (1998) 12±30.
Oblak, J. M., Goodenow, R. H. and Hehemann, R. F. Trans. AIME 230 (1964) 258±259.
Oblak, J. M. and Hehemann, R. F. Transformations and Hardenability in Steels, Climax
Moly., Ann Arbor, USA (1967) 15±30.
Ochi, T., Takahashi, T. and Takada, H. Proc. of 30th Mechanical Working and Steel
Processing Conference, Iron and Steel Society, Warrendale, PA (Oct. 1988).
Ohmori, Y. Trans. ISIJ 11 (1971a) 95±101.
Ohmori, Y. Trans. ISIJ 11 (1971b) 249.
Ohmori, Y. Proc. Int. Conf. on Martensitic Transformations, ICOMAT '86, Japan Institute
of Metals (1986) 587±594.
Ohmori, Y. Materials Transactions (Japan Institute for Metals) 30 (1989) 487±497.
Ohmori, Y. and Honeycombe, R. W. K. Proc. ICSTIS, Suppl. Trans. ISIJ 11 (1971) 1160±
1164.
Ohmori, Y., Ohtani, H. and Kunitake, T. Trans. ISIJ 11 (1971) 250±259.
Ohmori, Y., Ohtani, H. and Kunitake, T. Metal Science 8 (1974) 357±366.
Ohtsuka, K., Xu, Y., Okamoto, H. Unpublished research, National Research Institute for
Metals in Japan and Tottori University (2000).
Oka, M. and Okamoto, H. Proc. Int. Conf. on Martensitic Transformations, ICOMAT '86,
Japan Institute of Metals (1986) 271±275.
Oka, M. and Okamoto, H. Metall. Trans. A 19A (1988) 447.
Okabe, R., Koshizuka, N., Tanaka, M., Katamine, A. and San±Nomiya, Y. Trans. ISIJ 23
(1983) 390.
Okamoto, H. and Oka, M. Metall. Trans. A 17A (1986) 1113±1120.
Oldland, R. B. Australian Welding Research (1985) 31.
Olefjord, I. Int. Metals. Rev. 23 (1978) 149±163.
Olson, G. B. Unpublished research, Northwestern University, Chicago, USA (1984).
Olson, G. B. Scripta Metall. 21 (1987) 1023±1028.
Olson, G. B. and Cohen, M. Metall. Trans. 7A (1976a) 1897±1904.
Olson, G. B. and Cohen, M. Metall. Trans. 7A (1976b) 1905±1914.
Olson, G. B. and Cohen, M. Metall. Trans. 7A (1976c) 1915±1923.
Olson, G. B. and Owen, W. S. New Aspects of Martensitic Transformations, Tokyo, Japan,
Institute of Metals (1976) 105±110.
Olson, G. B. and Cohen, M. Scripta Metall. 11 (1977) 345±347.
Olson, G. B. and Cohen, M. Acta Metall. 27 (1979) 1907±1918.
Olson, G. B. and Cohen, M. Ann. Rev. Mater. Sci., eds. R. A. Huggins, R. H. Bube and D.
A. Vermilyea, Annual Reviews Inc., California, USA (1981) 1±30.
Olson, G. B. and Cohen, M. Solid±Solid Phase Transformations, eds. H. I. Aaronson et al.,
TMS-AIME, Warrendale, Pennsylvania, USA (1981) 1209±1213.
Olson, G. B. and Cohen, M. Metall. Trans. A 14A (1983) 1057±1065.
Olson, G. B. and Cohen, M. Dislocations in Solids, ed. F. R. N. Nabarro, 7 (1986) 297.
Olson, G. B., Bhadeshia, H. K. D. H. and Cohen, M. Proc. Int. Conf. Solid ! Solid Phase
Transformations, ed. G. W. Lorimer, Institute of Metals, London (1988) 322±325.
Olson, G. B., Bhadeshia, H. K. D. H. and Cohen, M. Acta Metall. 37 (1989) 381±389.
Olson, G. B., Bhadeshia, H. K. D. H. and Cohen, M. Metall. Trans. A 21A (1990) 805±809.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 431 411-440
431
Oriani, R. A. and Josephic, P. H. Acta Metall. 22 (1974) 1065±1074.
Orlova
Â
, A. Tabolova
Â
, Z. and C
Ï
adek, J. PhilosophicalMagazine 26 (1972) 1263±1274.
Owen, W. S. Trans. ASM 46 (1954) 812±829.
Owen, W. S. Metals Technology 14 (1980) 1±13.
Owen, W. S., Wilson, E. A. and Bell, T. High Strength Materials, ed. V. F. Zackay, Wiley,
New York (1964) 167±212.
Oriani, R. A. and Josephic, P. H. Acta Metall. 22 (1974) 1065±1074.
Padmanabhan, R. and Wood, W. E. Materials Science and Engng. 66 (1984) 1±11.
Pan, Y.-T. and Lee, J-Y. Materials Science and Engineering A A136 (1991a) 109±119.
Pan, Y.-T. and Lee, J-Y. Metallurgical Transactions A A136 (1991b) 2818±2822.
Pan, Y.-T. and Lee, J-Y. Proc. Conf. Processing, Microstructure and Properties of Microal-
loyed and Other Modern High Strength Low Alloy Steels, ed. A. J. DeArdo, ISS/AIME,
Warrendale, PA, USA (1992) 487±496.
Pan, Y.-T. and Lee, J-Y. Materials and Design 15 (1994) 331±338.
Papadimitriou, G. and Fourlaris, G. J. de Physique IV 7 (1997) C5 131±136.
Parker, E. R. and Zackay, V. F. Engineering Fracture Mechanics 7 (1975) 371±375.
Parker, E. R. Metall. Trans. 8A (1977) 1025±1042.
Parker, E. R., Ritchie, R. O., Todd, J. A. and Spencer, P. N. Research on Chrome±Moly
Steels, MPC±21, American Society of Mechanical Engineers, New York (1984) 109±
116.
Patel, J. R. and Cohen, M. Acta Metall. 1 (1953) 531.
Pati, S. R. and Cohen, M. Acta Metall. 19 (1971) 1327±1332.
Paxton, H. W. Metall. Trans. 1 (1970) 3479±3500.
Paxton, H. W. Metall. Trans. 3 (1972) 1035±1042.
Perovic, P., Purdy, G. R. and Brown, L. Scripta Metall. 15 (1981) 217±221.
Petch, N. J. Advances in Physical Metallurgy, eds. J. A. Charles and G. C. Smith, The
Institute of Metals, London (1990) 11±25.
Pfeil, L. B. Proc. Roy. Soc. 112 (1926) 182±195.
Pichl, W. and Krystian, M. Materials Science and Engineering A A273±275 (1999) 209±212.
Pickering, F. B. Int. Conf. on Electron Microscopy, Springer Verlag OHG, Berlin (1958)
628±637.
Pickering, F. B. Transformations and Hardenability in Steels, Climax Molybdenum, Ann
Arbor, USA (1967) 109±132.
Pickering, F. B. Physical Metallurgy and the Design of Steels, Applied Science Publishers,
Essex, UK (1978) 104.
Pickering, F. B. Phase Transformations, Institution of Metallurgists, London, series 3, No.
11, 2 (1979) VI 7±13.
Pickering, F. B. Constitution and Properties of Steels, VCH publishers, eds .R. W. Cahn, P.
Haasen and E. J. Kramer, Germany (1992) 339±399.
Pilling, J. and Ridley, N. Metall. Trans. A 13A (1982) 557±563.
Pippard, A. B. Classical Thermodynamics, Cambridge University Press (1981).
Pitsch, W. Acta Metall. 10 (1962) 897.
Pokhodnya, I. K. and Shvachko, V. I. International Journal of Hydrogen Energy 22 (1997)
285±289.
Pomey, J. Mem. Sci. Rev. Metall. 63 (1966) 507±532.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 432 411-440
432
Porter, L. E. and Rosenthal, P. C. Acta Metall. 7 (1959) 504±514.
Portevin, A. and Chevenard, P. Compt. Rend. 204 (1937) 772.
Portevin, A. and Jolivet, H. Annales de l'Academie des Sciences Techniques a
Â
Varsorie 4
(1937) 177.
Portevin, A. and Jolivet, H. Compt. Rend. 207 (1938) 1412.
Prado, J. Journal of Materials Science Lett. 5 (1986) 1075±1076.
Prado, J., Catalan, J. J. and Marsal, M. Journal of Materials Science 25 (1990) 1939±1946.
Purdy, G. R. and Hillert, M. Acta Metall. 32 (1984) 823±828.
Purdy, G. R., Weichert, D. H. and Kirkaldy, J. S. TMS±AIME 230 (1964) 1025±1034.
Putatunda, S. K. and Gadicherla, P. K. Materials Science and Engineering A A268 (1999)
15±31.
Race, J. Private communication, University of Cambridge (1990).
Radcliffe, S. V. and Rollason, E. C. JISI 191 (1959) 56±65.
Radcliffe, S. V., Schatz, M. and Kulin, S. A. JISI 201 (1963) 143±153.
Raghavan, V. and Entwistle, A. R. Physical Properties of Martensite and Bainite, Special
Rep. 93, ISI, London (1965) 30±37.
Raghavan, V. and Cohen, M. Metall. Trans. 2 (1971) 2409.
Rao, B. V. N. and Thomas, G. Metall. Trans. A 11A (1980) 441±457.
Rao, M. M. and Winchell, P. G. Trans. Met Soc. AIME 239 (1967) 956±960.
Rauch, G. C. and Leslie, W. C. Metall. Trans. 3 (1972) 373.
Ray, R. K. and Jonas, J. J. International Materials Reviews 35 (1990) 1±36.
Reed, R. and Bhadeshia, H. K. D. H. Recent Trends in Welding Science and Technology,
eds. S. A. David and J. Vitek, ASM International, Ohio, U.S.A. (1989) 205±210.
Rees, G. PhD Thesis, University of Cambridge (1991).
Rees, G. and Bhadeshia, H. K. D. H. Materials Science and Technology 8 (1992) 985±996.
Rees, G. and Bhadeshia, H. K. D. H. Materials Science and Technology 10 (1994) 353±358.
Reisdorf, B. G. TMS±AIME 227 (1963) 1334.
Ricks, R. A., Howell, P. R. and Barritte, G. S. International Conference on Solid ! Solid
Phase Transformations, eds. H. I. Aaronson et al., TMS±AIME, Warrendale, PA, USA
(1981b) 463±468.
Ricks, R. A., Howell, P. R. and Barritte, G. S. Journal of Materials Science 17 (1982) 732±
740.
Ridal, K. A. and Quarell, A. G. JISI 200 (1962) 366±373.
Ridal, K. A. and McCann, J. Physical Properties of Martensite and Bainite, Special Report
93, Iron and Steel Institute (London) (1965) 147±148.
Ridley, N. Phase Transformations in Ferrous Alloys, TMS±AIME, Warrendale, PA (1984)
210±236.
Rigsbee, J. M. and Aaronson, H. I. Acta Metall. 27 (1979) 351.
Rigsbee, J. M. and Aaronson, H. I. Acta Metall. 27 (1979) 365.
Ringer, S. R. Barbaro, F., Krauklis, P. and Easterling, K. E. Microstructure Control to
Achieve Properties In Modern Steels, Inst. of Metals and Materials Australasia, Mel-
bourne, Australia (1990) 1±6.
Ritchie, R. O. J. Engng. Materials Technology (Trans. ASME, H) 99 (1977a) 195±204.
Ritchie, R. O. Metal Science 11 (1977b) 368±381.
Ritchie, R. O., Castro, M. H. C., Zackay, V. F. and Parker, E. R. Metall. Trans. A 9A
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 433 411-440
433
(1978) 35±40.
Ritchie, R. O. International Metals Reviews 4 (1979) 205±230.
Ritchie, R. O., Knott, J. F. and Rice, J. R. J. Mech. Phys. Sol. 21 (1973) 395±400.
Ritchie, R. O., Moss, C. M. and Suresh, S. J. Engng. Materials Technology (Trans. ASME,
H) 102 (1980) 293.
Ritchie, R. O., Parker, E. R., Spencer, P. N. and Todd, J. A. J. Materials for Energy Systems
6 (1984) 151±162.
Roberts, C. S., Averbach, B. L. and Cohen, M. Trans. ASM 45 (1957) 576.
Roberts, M. J. Metall. Trans. 1 (1970) 3287±3294.
Robertson, J. M. Journal of the Iron and Steel Institute 119 (1929) 391±426.
Robson, J. D. and Bhadeshia, H. K. D. H. Materials Science and Technology 13 (1997) 631±
644.
Rodriguez-Ibabe, J. M. Materials Science Forum 284±286 (1998) 51±62.
Rouns, T. N. and Rundman, K. B. AFS Transactions 95 (1987) 851±874.
Rudberg, E. Jernkontorets Ann. 136 (1952) 91.
Rundman, K. B., Moore, D. J., Hayrynen, K. L., Dubensky, W. J. and Rouns, T. N. J.
Heat Treating 5 (1988) 79.
Russell, K. C. Metall. Trans. 2 (1971) 5±12.
Sachs, K., Ralph, B. and Salter, J. Heat Treatment '79, Metals Society, London (1980) 141±
146.
Sadovskii, V. D. Probl Mettaloverskie Term Obrab (1956) 31±52, Central Electricity Gen-
erating Board Translation 7648.
Saeki, M., Kurosawa, F. and Matsuo, M. Trans. ISIJ 26 (1986) 1017±1035.
Samajdar, I., Girault, E., Verlinden, B., Aernoudt, E. and Van Humbeeck, J. ISIJ Inter-
national 38 (1998) 998±1006.
Sandvik, B. P. J. and Nevalainen, H. P. Metals Tech. 15 (1981) 213±220.
Sandvik, B. P. J. Metall. Trans. A 13 (1982a) 777±787.
Sandvik, B. P. J. Metall. Trans. A 13 (1982b) 789±800.
Sandvik, B. P. J. and Wayman, C. M. Metall. Trans. A 14A (1983) 809±822.
Sarikaya, M., Tokushige, H. and Thomas, G. International Conference on Martensitic
Transformations ICOMAT 86, Japan Inst. of Metals, Tokyo, Japan (1986) 613±618.
Sawley, K. J., Preston, R. R. and Pendleton, R. Abstracts of the conference on Bainite,
Institute of Metals, London (25 April 1985).
Sawley, K. J., Bolton, P. J. and Pell, G. M. Wear of Materials, ed. K. C. Ludema, Amer.
Soc. of Mech. Engineers, New York (1987) 133±143.
Sawley, K. J., Benyon, J. A. and Jones, E. G. 9th International Wheelset Congress, Quebec,
Canada, Paper 2±6 (September 1988) 1±12.
Schaaber, O. J. Metals 7 (1955) 559±560.
Schanck, J. L. Industrial Heating (September 1969) 1664.
Scheil, E. Arch. Eisenhuttenwesen 12 (1935) 565.
Scheil, E. Hart.±Tech. Mitt. 7 (1955) 9.
Schissler, J. M., Arnould, J. and Metauer, G. Mem. Sci. Rev. Metallurgie 6 (1975) 779±793.
Schmatz, D. J. and Zackay, V. F. Trans. ASM 51 (1959) 476.
Schrader, A. and Wever, F. Arch. Eisenhuttenwesen 23 (1952) 489±495.
Self, P., Bhadeshia, H. K. D. H. and Stobbs, W. M. Ultramicroscopy 6 (1981) 29.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 434 411-440
434
Senior, B. A. The Effects of Retempering on the Microstructure of Ferritic Steels, Central
Electricity Generating Board Report TPRD/L/3220/R87 (1988).
Shackleton, D. N. and Kelly, P. M. Acta Metall. 15 (1967) 979±992.
Shackleton, D. N. and Kelly, P. M. I.S.I. Special Rep. 93, London (1965) 126±134.
Shea, M. M. and Ryntz, E. F. Trans. Am. Foundrymen's Soc. 94 (1986) 683.
Shepperson, S. and Allen, C. Wear of Materials, ed. K. C. Ludema, Amer. Soc. of Mech.
Engineers, New York (1987) 572±583.
Shewmon, P. Metall. Trans. A 7A (1976) 279.
Shewmon, P. Materials Science and Technology 1 (1985) 2.
Shieh, C. S., Din, T. A., Lui, T. S. and Chen, L. H. AFS Transactions 133 (1993) 365±371.
Shieh, C. S., Lui, T. S. and Chen, L. H. Materials Transactions of the Japan Institute of
Metals 36 (1995) 620±625.
Shiga, C., Amano, K., Enami, T., Tanaka, M., Tarui, R. and Kusuhara, Y. Technology and
Applications of High Strength Low Alloy (HSLA) Steels, ASM International (1983) 643±
654.
Shih, C. H., Averbach, B. L. and Cohen, M. Trans. AIME 203 (1955) 183±187.
Shimizu, K. and Nishiyama, Z. Mem. Inst. Sci. Ind. Res., Osaka University, (1963) 42.
Shimizu, K., Ko, T. and Nishiyama, Z. Trans. JIM 5 (1964) 223±228.
Shiokawa, T. Unpublished research quoted in Moore (1985).
Shim, J. H., Byun, J. S., Cho, Y. W., Oh, Y. J., Shim, J. D. and Lee, D. N. ISIJ International
40 (2000) 819±823.
Shipway, P. and Bhadeshia, H. K. D. H. Materials Science and Technology 11 (1995) 1116±
1128.
Shipway, P. and Bhadeshia, H. K. D. H. Materials Science and Engineering A A223 (1997)
179±185.
Shively, J. H., Hehemann, R. F. and Troiano, A. R. Corrosion 22 (1966) 253±256.
Singh, S. B. and Bhadeshia, H. K. D. H. Materials Science and Technology 12 (1996) 610±
612.
Singh, S. B. and Bhadeshia, H. K. D. H. Materials Science and Engineering A A245 (1998)
72±79.
Singh, S. B. PhD Thesis, University of Cambridge (1998).
Siriwardene, P. P. L. G. PhD Thesis, University of Cambridge (1955).
Smirenskaya, N. A., Kogan, L. I. and Entin, R. I. Fiz. Metal. Metalloved. 41 (1976) 1019±
1028.
Smith, C. S. A History of Metallography, University of Chicago Press (1960) 225.
Smith, E. Physical Basis of Yield and Fracture, Inst. of Phys. and Phys. Soc., Oxford (1966)
36.
Smith, G. M. PhD Thesis on `The Microstructure and Yielding behaviour of some Ti
Steels', University of Cambridge (1984).
Smith, G. V. and Mehl, R. F. Trans. AIMME 150 (1942) 211±226.
Smith, M. F., Speich, G. R. and Cohen, M. Trans. Met Soc. AIME 215 (1959) 528±530.
Smith, Y. E. and Siebert, C. A. American Society for Testing and Materials, Special Tech-
nical Publication 480 (1970) 131±151.
Smith, J. F. Acta Metall. 28 (1980) 1555±1564.
Snieder, G. and Kerr, H. W. Canadian Metallurgical Quarterly 23 (1984) 315±325.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 435 411-440
435
Solana, F., Takamadate, C., Bernstein, I. M. and Thompson, A. W. Metall. Trans. A 18A
(1987) 1023±1028.
Speich, G. R. Decomposition of Austenite by Diffusional Processes, Interscience, New York
(1962) 353±369.
Speich, G. R. Trans. AIME 245 (1969) 2553±2564.
Speich, G. R. Innovations in Ultrahigh±Strength Steel Technology, eds. G. B. Olson, M.
Azrin and E. S. Wright, 34th Sagamore Army Materials Conference, Watertown,
Massachusetts, USA (1987) 89±112.
Speich, G. R. and Cohen, M. Trans. Met Soc. AIME 218 (1960) 1050±1059.
Speich, G. R. and Warlimont, H. JISI 206 (1968) 385±392.
Speich, G. R., Cuddy, L. J., Gordon, C. R. and DeArdo, A. K. Int. Conf. on Phase
Transformations in Ferrous Alloys, eds. Marder, A. R. and Goldstein, J. I., ASM, Cleve-
land, Ohio, USA (1984) 341±392.
Spencer, P. N., Dauskardt, R. H., Parker, E. R. and Ritchie, R. O. High Temperature
Technology 7 (1989) 17±26.
Spielfeld, J. Materials Science and Engineering A A273±275 (1999) 639±643.
Srinivasan, G. R. and Wayman, C. M. Trans. Met Soc. AIME 242 (1968a) 79±81.
Srinivasan, G. R. and Wayman, C. M. Acta Metall. 16 (1968b) 609±620.
Srinivasan, G. R. and Wayman, C. M. Acta Metall. 16 (1968c) 621±636.
Stark, I. and Smith, G. D. W. Journal de Physique 48 (C) 6 (1987) 447±452.
Stark, I., Smith, G. D. W. and Bhadeshia, H. K. D. H. Solid ! Solid Phase Transforma-
tions, Institute of Metals, London (1988) 211±215.
Stark, I., Smith, G. D. W. and Bhadeshia, H. K. D. H. Metall. Trans. A 21A (1990) 847±
845.
Steven, W. and Haynes, A. J. JISI 183 (1956) 349±359.
Stewart, J., Thomson, R. C. and Bhadeshia, H. K. D. H. Journal of Materials Science 29
(1994) 6079±6084.
Stickels, C. A. Metall. Trans. 5 (1974) 865±874.
Strang, A., Beech, S. M. and Gooch, D. J. Materials for Advanced Power Engineering, ed.
D. Coutsouradis, Netherlands (1994) 549±560.
Strang, A., Vodarek, V. and Bhadeshia, H. K. D. H. Modelling of Microstructural
Evolution in Creep Resistant Materials, eds. A. Strang and M. McLean, IOM Commu-
nications London (1999) 129±150.
Strangwood, M. PhD Thesis, University of Cambridge (1987).
Strangwood, M. and Bhadeshia, H. K. D. H. Advances in Welding Science and Technology,
ed. S. A. David, ASM, Metals Park, Ohio, USA (1987) 209±213.
Strangwood, M. and Bhadeshia, H. K. D. H. Solid ! Solid Phase Transformations, Insti-
tute of Metals, ed. G. W. Lorimer, London (1988) 466±470.
Sudo, M., Higashi, M., Hori, H., Iwai, T., Kambe, S. and Shibata, Z. Trans. Iron and Steel
Institute of Japan 21 (1981) 820±827.
Sudo, M., Tsukatani, I. and Shibata, Z. Metallurgy of Continuously Annealed Sheet Steel,
eds. B. L. Bram®tt and P. L. Mangonon Jr., TMS±AIME, Warrendale, Pennsylvania
(1982) 301±319.
Sudo, M. and Iwai, T. Trans. Iron and Steel Institute of Japan 23 (1983) 294.
Sugden, A. A. B. and Bhadeshia, H. K. D. H. Metall. Trans. A 19A (1988) 669±674.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 436 411-440
436