Bhadeshia H.K.D.H. Bainite In Steels. Transformations, Microstructure and Properties
Подождите немного. Документ загружается.
Alloys, eds. A. R. Marder and J. I. Goldstein, AIME, Cleveland, Ohio, USA
(1984) 293±326.
Christian, J. W. and Mahajan, S. Progress in Materials Science 39 (1995) 1±157.
Chung, D. W., Todd, J. A., Youngs, J. K. and Parker, E. R. Advanced Materials for
Pressure Vessel Service with Hydrogen at High Temperatures and Pressures, ed. M. Sem-
chyshen, MPA±18 (1982) 25.
Clark, H. M. and Wayman, C. M. Phase Transformations, ASM, Metals Park, Ohio, USA
(1970) 59±114.
Clayton, P., Sawley, K. J., Bolton, P. J. and Pell, G. M. Wear 120 (1987) 199±220.
Coates, D. E. Metall. Trans. 3 (1972) 1203±1212.
Coates, D. E. Metall. Trans. 4 (1973a) 1077±1086.
Coates, D. E. Metall. Trans. 4 (1973b) 2313±2325.
Cohen, M. Trans. ASM 28 (1940) 537.
Cohen, M. Discussion to Troiano and Greninger (1946).
Cohen, M., Machlin, E. S. and Paranjpe, V. G. Thermodynamics in Physical Metallurgy,
ASM, Cleveland, Ohio, USA (1950).
Coheur, P. and Habraken, L. Rev. Univ. Min. 94 (1951) 107.
Coldren, A. P., Cryderman, R. L., Semchysen, M. Steel Strengthening Mechanisms,
Climax Molybdenum, Ann Arbor, USA, (1969) 17.
Collins, L. E., Knight, R. F., Ruddle, G. E. and Boyd, J. D. Accelerated Cooling of Steel, ed.
P. D. Southwick, TMS±AIME (1985) 261±282.
Collins, M. Materials Science and Technology 5 (1989) 323±327.
Conrad, H. J. Metals (July 1964) 582.
Cotterell, B. Trans. ASME, J. Basic. Eng. 87 (1965) 230.
Cottrell, A. H. JISI 151 (1945) 93P±104P.
Cottrell, A. H. International Journal of Pressure Vessels and Piping 64 (1995) 171±174.
Cottrell, S. A. and Ko, T. JISI 173 (1953) 225.
Crosky, A., McDougall, P. G. and Bowles, J. S. Acta Metall. 28 (1980) 1495±1504.
Cullison, A. American Welding Journal 70 (1991) 80±82.
Curry, D. A. and Knott, J. F. Metal Science 12 (1978) 511.
Dadian, M. Advances in Welding Science and Technology, ed. S. A. David, ASM, Metals
Park, Ohio, USA (1987) 101±117.
Daigne, J., Guttmann, M. and Naylor, J. P. Mat. Sci. and Eng. 56 (1982) 1±10.
Dallum, C. B. and Olson, D. L. American Welding Journal (1989) 198s±205s.
Darken, L. S. Transactions AIME 180 (1949) 430±438.
Dauskardt, R. H. and Ritchie, R. O. ASME PVP Vol. 114/MPC Vol. 27, American
Society for Mechanical Engineers, New York, NY (1986) 17±28.
Davenport, A. S. Trans. Met. Soc. AIME 145 (1941) 301±340.
Davenport, A. T. The Crystallography of Upper Bainite, Republic Steel Research Rep. on
Project 12051 (February 1974) 1±35.
Davenport, A. T. The Hot Deformation of Austenite, ed. J. B. Ballance, TMS±AIME, New
York, USA (1977) 517±536.
Davenport, E. S. and Bain, E. C. Trans. Met Soc. AIME 90 (1930) 117±154; Also
published in Metall. Trans. A 1 (1970) 3501±3530, as a Metallurgical Classic, with
commentary by H. W. Paxton.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 417 411-440
417
Davenport, E. S. Trans. ASM 27 (1939) 837±886.
Davies, G. J. and Garland, J. G. International Metals Reviews 20 (1975) 83±106.
Davies, G. J., Kallend, J. S. and Morris, P. P. The Hot Deformation of Austenite, ed. J. B.
Ballance, TMS±AIME, New York, USA (1977) 599±626.
Davies, R. G. and Magee, C. L. Proc. Second International Conference on the Strength of
Metals and Alloys, ASM (1970a) 817.
Davies, R. G. and Magee, C. L. Metall. Trans. 1 (1970b) 2927±2931.
Davies, R. G. and Magee, C. L. Metall. Trans. 2 (1971) 1939±1947.
Dearden, J. and O'Neill, H. Trans. Inst. Weld. 3 (1940) 203.
DeArdo, A. J. Accelerated Cooling of Rolled Steel, eds. G. E. Ruddle and A. F. Crawley,
Pergamon Press, Oxford, UK (1988) 3±27.
Deep, G. and Williams, W. M. Canadian Metall. Quart. 14 (1975) 85±96.
Degang, Y., Dajun, C., Jinghong, Z., Yirong, H. E. and Fufa, S. Acta Metallurgica Sinica 2
(1989) 161±167.
DeHoff, R. T. and Rhines, F. N., eds. Quantitative Microscopy, McGraw±Hill Book
Company, New York (1968).
Delaey, L. and Warlimont, H. Shape Memory Effects in Alloys, ed. J. Perkins, TMS±AIME,
Plenum Press, New York, NY (1975) 89±114.
Deliry, J. Mem. Sci. Rev. Metall. 62 (1965) 527±550.
Denis, S., Gautier, E., Simon, A. and Beck, G. Materials Science and Technology 1 (1985)
805±814.
Devanathan, R. and Clayton, P. Rolling/Sliding Wear Behaviour of Three Bainitic Steels,
Private communication (1990).
Diesburg, D. E., Kim, C. and Fairhurst, W. Heat Treatment 81, The Institute of Metals,
London, (1981) 178.
Dionne, S., Krishnadev, M. R., Collins, L. E. and Boyd, J. D. Accelerated Cooling of
Rolled Steel, eds. G. E. Ruddle and A. F. Crawley, Pergamon Press, Oxford, UK
(1988) 71±84.
Dorazil, E., Barta, B., Munsterova, E., Stransky, L. and Huvar, A. AFS Int. Cast Met. J.
(June 1962) 52±62.
Dorazil, E., Svejcar Arch Eisenhuttenaves 50 (1979) 293±298.
Dorn, J. E. Dislocation Dynamics, eds. A. R. Rosen®eld, G. T. Hahn, A. L. Bement
and R. I. Jaffee, McGraw-Hill, New York (1968) 27.
Dowling, J. M., Corbett, J. M. and Kerr, H. W. Metall. Trans. A 17A (1986) 1611.
Drozdov, B. Ya., Kogan, L. I. and Entin, R. I. Fiz. Metal. Metalloved. 13, No. 5
(1962) 776±779; English translation in Physics of Metals and Metallography 13 No. 5
(1962) 135±138.
Dube
Â
C. A. PhD Thesis, Carnegie Institute of Technology (1948).
Dube
Â
, C. A., Aaronson, H. I. and Mehl, R. F. Rev. Met. 55 (1958) 201.
Dubensky, W. J. and Rundman, K. B. AFS Transactions 93 (1985) 389±394.
Dubrov, V. A. Fiz. Metal. Metalloved. 28 (No. 2) (1969) 309±314; English translation in
Physics of Metals and Metallography 28 No. 2 (1969) 126±131.
Duckworth, W. E. Journal of Metals 18 (1966) 915.
Duckworth, W. E., Taylor, P. R. and Leak, D. A. JISI 55 (1964) 135.
Dunne, D. P. and Wayman, C. M. Metallurgical Transactions 202 (1971) 2327±2341.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 418 411-440
418
Durbin, M. and Krahe, P. R. Processing and Properties of Low-Carbon Steel, AIME,
Warrendale, Pennsylvania, USA (1973) 109±31.
Easterling, K. E. Introduction to the Physical Metallurgy of Welding, Butterworths, London
(1983).
Edwards, D. P. JISI 207 (1969) 1494±1502.
Edwards, R. H. and Kennon, N. F. J. Aust. Inst. Metals 19 (1974) 45.
Edwards, R. H. and Kennon, N. F. Metall. Trans. 9A (1978) 1801.
Ehrenfest, P. Proc. Acad. Sci. Amsterdam 36 (1933) 153.
Entin, R. Decomposition of Austenite by Diffusional Processes, Interscience, New York
(1962) 295±311.
Ericsson, C. E., Bhat, M. S., Parker, E. R. and Zackay, V. F. Metall. Trans. A 7A (1976)
1800±1803.
Es-Souni, M. and Beaven, P. A. Microanalysis of inclusion/matrix interfaces in weld metals,
International Institute of Welding Document II±A±815±90 (1990).
Esaka, K., Koyama, K., Matsumura, Y. and Tashiro, M. HSLA Steels: Metallurgy and
Applications, eds. J. M. Gray, T. Ko, Z. Shouhua, W. Baorong and X. Xishan, Beijing,
China, ASM International (1985) 959±968.
Eterashvili, T. V., Utevsky, L. M. and Spasskiy, M. N. Phys. Met. Metall. 48(4) (1979)
113±121.
Evans, G. M. International Institute of Welding Document II±A±666±86 (1986).
Evans, G. M. International Institute of Welding Document II±A±739±86 (1988).
Evans, P. R. V. and O'Neill, H. JISI 191 (1959) 34.
Evans, G. M. The effect of aluminium in shielded metal-arc C±Mn steel multi-run
deposits, International Institute of Welding Document II±1146±90 sub commission
II±A±796±90 (1990) 1±14.
Farrar, R. A. and Harrison, P. L. Journal of Materials Science 22 (1987) 3812±3820.
Fisher, J. C. Metals Transactions 185 (1949) 688±700.
Fisher, J. C. Thermodynamics in Physical Metallurgy, ASM, Cleveland, Ohio, USA (1950).
Fisher, R. M. Proc. Int. Conf. on Electron Microscopy, Springer Verlag OHG, Berlin (1958)
579±588.
Fitzgerald, F. Metals and Materials 7 (1991) 378±387.
Fleck, N. A., Grong, O., Edwards, G. R. and Matlock, D. K. Welding Journal (1986)
113s±121s.
Foct, J., Rochegude, P. and Hendry, A. Scripta Metallurgica 23 (1988) 613±615.
Fondekar, M. K., Rao, A. M. and Mallik, A. K. Metall. Trans. 1 (1970) 885±890.
Forster, F. and Scheil, E. Z. Metallkunde 28 (1936) 245±247.
Forster, F. and Scheil, E. Naturwissenschaften 25 (1937) 439.
Forster, F. and Scheil, E. Z. Metallkunde 32 (1940) 165.
Fourlaris, G., Baker, A. J. and Papadimitriou, G. D. Acta Materialia 44 (1996) 4791±4805.
Fowler, R. H. and Guggenhiem, E. A. Statistical Thermodynamics, Cambridge University
Press, New York (1939) 442.
Franetovic, V., Sachdev, A. K. and Ryntz, E. F. Metallography 20 (1987a) 15±37.
Franetovic, V., Shea, M. M. and Ryntz, E. F. Materials Science and Engineering 96 (1987b)
231±245.
Franklin, A. G. J. Iron Steel Inst. 207 (1969) 181±186.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 419 411-440
419
Franti, G. W., Williams, J. C. and Aaronson, H. I. Metall. Trans. 9A (1978) 1641.
Freiwillig, R., Kudrman, J. and Chraska, P. Metall. Trans. 7A (1976) 1091.
Fridberg, J., Torndahl, L.-E. and Hillert, M. Jernkont. Ann. 153 (1969) 263±273.
Fujita, N. and Bhadeshia, H. K. D. H. Materials Science and Technology 15 (1999) 627±634.
Fullman, R. L. Trans. AIMME 197 (1953) 477, 1267.
Gagne, M. AFS Transactions 93 (1985) 801±812.
Garnham, J. University of Leicester, private communication (1989).
Garwood, R. D. J. Inst. Met. 83 (1954±1955) 64±68.
George, T., Parker, E. R. and Ritchie, R. O. Materials Science and Technology 1 (1985)
198±208.
Ghonem, H., Kalousek, J. and Stone, D. Specialty Steels and Hard Materials, Pretoria,
South Africa, Pergamon Press, Oxford (1982) 259.
Ghosh, G. and Olson, G. B. Acta Metallurgica et Materialia 42 (1994) 3361±3370.
Ghosh, G., Campbell, C. E. and Olson, G. B. Metallurgical and Materials Transactions A
30A (1999) 501±512.
Gibson, G. B. Review of cleavage fracture mechanisms in ferritic steels, UKAEA Report
R13227, Harwell, Oxon (1988) referred to by Burdekin (1990).
Gladman, T. Private communication to Honeycombe and Pickering (1972).
Gladman, T. Physical Metallurgy of Microalloyed Steels, Inst. of Materials, London (1997)
1±360.
Gladman, T., Dulieu, D. and McIvor, I. D. Proc. Conf. Microalloying 1975, Washington,
(1±3 October 1975).
Glicksman, M. E., Shaefer, R. J. and Ayres, J. D. Metall. Trans. A 7A (1976) 1747±1759.
Goldak, J., Patel, B., Bibby, M. and Moore, J. Computational Weld Mechanics, Carelton
University, Canada, private communication (1985).
Goldman, L. M. and Aziz, M. J. J. Mater. Res. 2 (1987) 524±527.
Goodenow, R. H. and Hehemann, R. F. Discussion to Speich (1962).
Goodenow, R. H., Matas, S. J. and Hehemann, R. F. Trans. AIMME (1963) 651±658.
Goodenow, R. H., Hehemann, R. F. Trans. AIMME 233 (1965) 1777.
Goodenow, R. H., Barkalow, R. H. and Hehemann, R. F. ISI Spec. Rep. 93, London
(1969) 135±141.
Gorbach, V. G., Jelenkowski, J. and Filipiuk, J. Materials Science and Technology 5 (1989)
36±39.
Gordine, J. and Codd, I. JISI 207 (1969) 461±467.
Gourgues, A.-F., Flower, H. M. and Lindley, T. C. Materials Science and Technology 16
(2000) 26±40.
Grabke, H. J., Hennesen, K., Moller, R. and Wei, W. Scripta Metall. 21 (1987) 1329±1334.
Graham, L. W. and Axon, H. J. JISI 191 (1959) 361.
Graf, M. K., Hillenbrand, H. G., Peters, P. A. Accelerated Cooling of Steel, ed. P. D.
Southwick, TMS±AIME (1985) 349±366.
Grange, R. A. Metall. Trans. 2 (1971) 417.
Grassl, K., Thompson, S. W. and Krauss, G. New Options for Steel Selection for Auto-
motive Applications, Society of Automotive Engineers, Warrendale, USA, Technical
Paper 890508 (March 1989) 1±13.
Greenwell, B. Private communication, NEI Parsons, Ltd., Newcastle, UK (1989).
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 420 411-440
420
Greenwood, G. W. Acta Metall. 4 (1956) 243.
Gregg, M. and Bhadeshia, H. K. D. H. Metallurgical Transactions A 25 (1994a) 1603±
1611.
Gregg, M. and Bhadeshia, H. K. D. H. Acta Metallurgica et Materialia 42 (1994b) 3321±
3330.
Gregory, E. and Simmons, E. N. The Structure of Steel, Blackie and Son Ltd. London
(1947).
Greninger, A. B. and Troiano, A. R. Trans. AIMME 140 (1940) 307±336.
Grif®ths, J. R. and Oates, G. Metal Science 11 (1977) 285±292.
Grong, O. Metallurgical Modelling of Welding, 2nd edition, Institute of Materials, Lon-
don (1997) 1±602.
Grong, O. and Matlock, D. K. Int. Met. Rev. 31 (1986) 27±48.
Grong, O., Kluken, A. O. and Bjornbakk, B. Joining and Materials (1988) 164±169.
Gross, J. H., Stout, R. D. and Czyryca, E. J. Welding Journal 74 (1995) 53±62.
Grube, W. L. and Rouze, S. R. High Temperature±High Resolution Metallography, Gordon
and Breach, New York (1967) 313.
Grujicic, M., Olson, G. B. and Owen, W. S. Metall. Trans. A 16A (1985a) 1713±1722.
Grujicic, M., Olson, G. B. and Owen, W. S. Metall. Trans. A 16A (1985b) 1723±1734.
Grujicic, M., Olson, G. B. and Owen, W. S. Metall. Trans. A 16A (1985c) 1735±1745.
Gulyaev, A. P. Metallurgy 15 (1940) 43.
Gutierrez, I., Aranzabal, J., Castro, F. and Urcola, J. J. Metall. and Materials Transactions
A 26A (1995) 1045±1060.
Habraken, L. J. Rev. Met. 53 (1956) 930.
Habraken, L. J. Compt. Rend. 19 (1957) 126.
Habraken, L. J. Proc. 4th Int. Conf. on Electron Microscopy, Springer-Verlag, Berlin (1958)
621±628.
Habraken, L. Physical Properties of Martensite and Bainite, Special Report 93, Iron and
Steel Institute, London (1965) 147.
Habraken, L. J. and Economopolus, M. Transformation and Hardenability in Steels,
Climax Molybdenum, Ann Arbor, Michigan, USA (1967) 69±107.
Ha
È
gg, G. Z. Kristallogr. 89 (1934) 92.
Haezebrouck, D. M. Ph.D. Thesis entitled Nucleation and Growth of a Single
Martensitic Particle, Massachusetts Institute of Technology (June 1987).
Hall, B. Ph.D. Thesis, University of Cambridge (1990).
Hall, D. J., Self, P. G. and Stobbs, W. M. J. of Microscopy 130 (1983) 215±224.
Hannemann, H., Hofmann, W. and Wiester, H. J. Arch. Eisenhuttewesen 6 (1932±1933)
199.
Harrison, P. L. and Farrar, R. A. J. of Materials Science 16 (1981) 2218±2226.
Harrison, P. L. and Farrar, R. A. Int. Materials Rev. 34 (1989) 35±51.
Hawkins, M. J. and Barford, J. JISI 210 (1972) 97±105.
Hayrynen, K. L., Moore, D. J. and Rundman, K. B. Presented at the 1988 American
Foundry Society Conference, private communication to H. K. D. H. Bhadeshia
(1988) 1±13.
Heckel, R. W. and Paxton, H. W. Trans. ASM 53 (1961) 539.
Hehemann, R. F., Luhan, V. J. and Troiano, A. R. Trans. ASM 49 (1957) 409±426.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 421 411-440
421
Hehemann, R. F. Phase Transformations, ASM, Metals Park, Ohio, USA (1970) 397±432.
Hehemann, R. F., Kinsman, K. R. and Aaronson, H. I. Metall. Trans. 3 (1972) 1077.
Heitmann, W. F. and Babu, F. B. Fundamentals of Microalloying Forging Steels, eds. G.
Krauss and S. K. Banerji, The Metallurgical Society of the AIME, Warrendale,
Pennsylvania, U.S.A. (1987) 55±72.
Heller, W. and Schweitzer, R. Railway Gazette International (October 1980) 855±857.
Heller, W. and Schweitzer, R. 2nd Int. Conf. Heavy Haul Railways, Colorado, USA (1982)
282±286.
Heritier, B. et al. HSLA Steels ± Technology and Applications, ASM International, Ohio,
U.S.A. (1984) 981±990.
Hildenwall, B. Prediction of the Residual Stresses Created During Quenching, PhD.Thesis,
Linkoping University, Sweden 1 (1979).
Hillert, M. Jernkontorets Ann. 136 (1952) 25±37.
Hillert, M. Paraequilibrium, Internal Report, Swedish Inst. Met. Res., Stockholm,
Sweden (1953).
Hillert, M. Jernkontorets Ann. 141 (1957) 757±764.
Hillert, M. The Growth of Ferrite, Bainite and Martensite, Internal Report, Swedish Inst.
Met. Res., Stockholm, Sweden (1960).
Hillert, M. Decomposition of Austenite by Diffusional Processes, eds. V. F. Zackay and H. I.
Aaronson, Interscience, New York (1962) 197±247.
Hillert, M. Metall. Trans. A 6A (1975) 5±19.
Hillert, M. Solid ! Solid Phase Transformations, TMS±AIME, Warrendale, PA, USA
(1982) 789±806.
Hillert, M. and Sundman, B. Acta Metall. 24 (1976) 731±743.
Hillert, M., Ho
È
glund, L. and A
Ê
gren, J. Acta Metallurgica et Materialia 41 (1993)
1951±1957.
Hirotsu, K. C. S. and Nagakura, S. Acta Metall. 20 (1972) 645±655.
Hirth, J. P. and Cohen, M. Metall. Trans. 1 (1970) 3.
Hobbs, R. M., Lorimer, G. W. and Ridley, N. JISI 210 (1972) 757.
Hodgson, W. H. and Preston, R. R. Bulletin of the Canadian Institute of Metals CIM Bull.
(October 1988) 95±101.
Hofer, W. E., Cohn, E. M. and Peebles, W. C. J. Amer. Chem. Soc. 71 (1949) 189.
Hoffman, D. W. and Cohen, M. Acta Metallurgica 21 (1973) 1215±1223.
Hollomon, J. H. and Jaffe, L. D. Trans. TMS±AIME 162 (1945) 223±249.
Homma, H., Ohkita, S., Matsuda, S. and Yamamoto, K. American Welding Journal
(October 1987) 301s±309s.
Honeycombe, R. W. K. Phase Transformations in Ferrous Alloys, eds. A. R. Marder and J. I.
Goldstein, The Metallurgical Society of the AIME, Warrendale, Pennsylvania (1984)
259±280.
Honeycombe, R. W. K. and Pickering, F. B. Metall. Trans. 3 (1972) 1099±1112.
Honeycombe, R. W. K. Steels, Edward Arnold, London (1981).
Honeycombe, R. W. K. The Plastic Deformation of Metals, 2nd edition, Edward Arnold,
London (1984) 150±151.
Honeycombe, R. W. K. and Bhadeshia, H. K. D. H. Steels, 2nd edition, Edward Arnold,
London (1995).
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 422 411-440
422
Horii, Y., Ohkita, S., Wakabayashi, M. and Namura, M. Nippon Steel Technical Report
Nippon Steel Company, Japan (1986) 1±9.
Horii, Y., Wakabayashi, M., Ohkita, S. and Namura, M. Nippon Steel Technical Report
No. 37, Nippon Steel Company, Japan (1988) 1±9.
Horn, R. PhD Thesis, University of California (1976).
Horn, R. M. and Ritchie, R. O. Metall. Trans. A 9A (1978) 1039±1053.
Hornbogen, E. Materials Science and Engineering A A273±275 (1999) 630±633.
Houdremont, E., Koch, E. and Wiester, H.±J. Arch. Eisenhuttenwesen 18 (1945) 147.
Houillier, R. Le, Begin, G. and Dube
Â
,C.E.Metall. Trans. 2A (1971) 2645±2653.
Howard, R. T. and Cohen, M. Trans. AIMME 176 (1948) 384±400.
Hrivank, I. Guide to the welding and weldability of CrMo and CrMoV heat resistant steels,
International Institute for Welding Document IX±G±319/c±87 (1987) 1±61.
Huang, D. H. and Thomas, G. Metall. Trans. 8A (1977) 1661.
Hulka, K., Heisterkamp, F. and Nachtel, L. Processing, Microstructure and Properties of
HSLA Steels, ed. A. J. DeArdo, The Minerals, Metals and Materials Society,
Warrendale, Pennsylvania, USA (1988) 153±167.
Hull, D. Bulletin of the Institute of Metals 2 (1954) 134±139.
Hultgren, A. Trans. ASM 39 (1947) 915±1005.
Hultgren, A. Jernkontorets Ann. 4 (1951) 403.
Hultgren, A. Kungl. Ver. Akad. Handl. 4 (1953) 1.
Hume-Rothery, W.The Structures of Alloys ofIron, Pergamon Press, Oxford (1966) 240±253.
Hume-Rothery, W., Raynor, G. V. and Little, A. T. Arch Eisenhuttenwesen 145 (1942) 143.
Hwang, J. R., Peng, K. P. and Wang, C. C. Journal of Materials Science Letters 15 (1996)
192±196.
Ichinose, H., Takehara, J. and Ueda, M. 1st Int. Conf. on Heavy Haul Railways, Perth,
Australia (1978).
Ichinose, H., Takehara, J. and Ueda, M. 2nd Int. Conf. on Heavy Haul Railways, Colorado
Springs, USA (1982) 178±186.
Imagumbai, M., Chijiiwa, R., Aikawa, N., Nagumo, M., Homma, H., Matsuda, S. and
Mimura, H. HSLA Steels: Metallurgy and Applications, eds. J. M. Gray, T. Ko, Z.
Shouhua, W. Baorong and X. Xishan, ASM Int., Ohio (1985) 557±566.
Inagaki, M. and Hiroyuki, M. Quality and reliability in welding, Hangzhou, China,
Welding Institute of the Chinese Mechanical Engineering Society (1984).
Ion, J. C., Easterling, K. E. and Ashby, M. F. Acta Metall. 32 (1984) 1949±1962.
Irani, J. J. British Iron and Steel Research Association Report No. MG/A/60/67, BSIRA,
London (1967).
Irvine, K. J. and Pickering, F. B. JISI 187 (1957) 292±309.
Irvine, K. J., Pickering, F. B., Heselwood, W. C. and Atkins, M. JISI 195 (1957) 54±67.
Irvine, K. J. and Pickering, F. B. JISI 188 (1958) 101.
Irvine, K. J., Llewellyn, D. T. and Pickering, F. B. JISI 199 (1961) 153.
Irvine, K. J. and Pickering, F. B. JISI 201 (1963) 518±531.
Irvine, K. J. and Pickering, F. B. ISI Spec. Rep. 93, London (1965) 110±125.
Isaichev, I. V. Zhur Tekhn. Fiziki. 17 (1947) 835.
Ishiguro, T., Murakami, Y., Ohnishi, K. and Watanabe, J. ASTM-STP 755, American
Society for Testing Materials, Philadelphia, USA (1982) 129±147.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 423 411-440
423
Ishiguro, T., Ohnishi, K., Murakami, Y., Mima, S. and Watanabe, J. Research on Chrome-
Moly Steels, MPC-21, American Society of Mechanical Engineers, New York (1984)
43±52.
Ishikawa, F., Takahashi, T. and Ochi, T. Metallurgical and Materials Transactions 25A
(1994) 929±936.
Ito, Y. and Bessyo, K. Int. Inst. of Welding Document IX±576±68 (1968).
Ito, Y. and Nakanishi, M. International Institute for Welding Document XII±113±75
(1975).
Ito, Y. and Nakanishi, M. Sumitomo Search 15 (1976) 42±62.
Ito, Y., Nakanishi, M. and Komizo, Y. Metal Constr. 14 (1982) 472.
Ivantsov, G. P. Dokl. Akad. Nauk. SSSR 58 (1947) 567.
Jack, K. H. Acta Cryst. 3 (1950) 392.
Jack, K. H. JISI 169 (1951) 26±36.
James, J. S. and Thomson, R. C. Solid!Solid Phase Transformations 1999, eds. M.
Koiwa, K. Otsuka and T. Miyazaki, Japan Institute for Metals, Tokyo, Japan
(1999) 1473±1476.
Jana, S. and Wayman, C. M. Metall. Trans. 1 (1970) 2825.
Jellinghaus, W. Arch. Eisenhuttenwesen 23 (1952) 459.
Jellinghaus, W. Arch. Eisenhuttenwesen 28 (1957) 469.
Jellinghaus, W. and Friedewold, H. Arch. Eisenhuttenwesen 31 (1960) 309.
Jepson, M. D. and Thompson, F. C. JISI 162 (1949) 49±56.
Jerath, V., Mistry, K., Bird, P. and Preston, R. R. British Steel Report Collaborative
research, University of Cambridge (H. Bhadeshia) and British Steel Corporation,
Report SL/RS/R/S/1975/1/91A (1991) 1±43.
Jihua, Z., Shuchuan, C. and Hsu, T. Y. Acta Metall. 37 (1989) 241±246.
Jin, N. and Clayton, P. Wear 202 (1997) 202±207.
Jingsheng, Y., Zongsen, Y. and Chengjian, W. J. of Metals 40 (1988) 26±31.
Jones, W. K. C. and Alberry, P. J. Ferritic Steels for Fast Reactor Steam Generators, British
Nuclear Engineering Society Conference, London (June 1977) paper 78, 1±4.
Jones, W. K. C. and Alberry, P. J. Residual Stresses in Welds by Welded Construction and
Their Effects, London, UK (Nov. 1978) 15±25.
Jones, B. L. and Johnson, D. L. Steels for Line±Pipe and Pipeline Fittings, Metals Society,
London (1983) 14.
Jones, B. L., DeArdo, A. J., Garcia, C. I., Hulka, K. and Luthy, H. HSLA Steels:
Metallurgy and Applications, Proc. of an Int. Conf. on HSLA Steels '85, China,
eds. J. M. Gray, T. Ko, Z. Shouhua, W. Baorong and X. Xishan, ASM Inter-
national, Ohio, USA (1985) 875±884.
Jones, C. L. and Pilkington, R. Metall. Trans. A 9A (1978) 865.
Jones, S. and Bhadeshia, H. K. D. H. Acta Materialia 45 (1997) 2911±2920.
Josefsson, B. `Microscopy and Microanalysis of Bainitic Weld Metal', Licentiate Thesis,
Chalmers University, Sweden (1989).
Josefsson, B., Kvist, A. and Andren, H. O. J. de Physique Colloque C6 48 (1987)
C6±435±440.
Josefsson, B. and Andren, H. O. Proc. of the 35th Int. Field Emission Symp., Oak Ridge,
Tennessee, USA (July 1988) 18±22.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 424 411-440
424
Josefsson, B. and Andren, H. O. Advances in the Science and Technology of Welding, eds. S.
A. David and J. Vitek, ASM Int., Ohio, USA (1989) 243±247.
Judson, P. and McKeown, D. Advances in the Control of Weld Metal Toughness, The
Welding Institute, Abington, Cambridge (1982).
Kakeshita, T., Shimizu, K., Kimima, S., Yu, Z. and Date, M. Trans. JIM 26 (1985) 630±
637.
Kajiwara, S., Ogawa, K., Kikuchi, T., Okamoto, H. and Oka, M. Int. Conf. Solid±Solid
Phase Transformations 99 (JIMIC±3), eds. M. Koiwa, K. Otsuka and T. Miyazaki,
Japan Inst. Metals, Tokyo (1999) 969±972.
Kalish, D., Kulin, S. A. and Cohen, M. J. of Metals (February 1965) 157.
Kalish, D. and Cohen, M. Mater. Sci. and Engng. 6 (1970) 156±166.
Kalousek, J. and Beynon, G. Rail Metallurgy, Canadian Paci®c Technical Reports, No.
S497±75 (1975).
Kalousek, J., Fegredo, D. M. and Laufer, E. E. Wear 105 (1985a) 199±222.
Kalousek, J., Fegredo, D. M. and Laufer, E. E. Wear of Materials, ed. K. C. Ludema,
Amer. Soc. of Mech. Engineers, New York (1985b) 212±231.
Kamada, A., Koshizuka, N. and Funakoshi, T. Trans. ISIJ 16 (1976) 407.
Kang, M. K., Sun, J. L. and Yang, Q. M. Metall. Trans. A 21A (1990) 853±858.
Kapadia, B. M. Hardenability Concepts with Applications to Steel, ed. D. V. Doane and J. S.
Kirkaldy, The Metallurgical Society of the AIME, Warrendale, Pennsylvania, USA
(1978) 448±480.
Kar, R. J., Horn, R. M. and Zackay, V. F. Metall. Trans. A 10A (1979) 1711±1717.
Kar, R. J. and Todd, J. A. Discussion on Transformation Characteristics, ASTM STP 755,
American Society for Testing Materials (1982) 361±362.
Kasuya, T., Ichikawa, K., Fuji, M. and Bhadeshia, H. K. D. H. Materials Science and
Technology, 15 (1999) 471±473.
Kaufman, L. and Cohen, M. Prog. in Metal Phys. 7 (1958) 165±246.
Kaufman, L. and Radcliffe, S. V. Decomposition of Austenite by Diffusional Processes, eds.
V. F. Zackay and H. I. Aaronson, Interscience, New York (1962) 313±351.
Keh, A. S. and Leslie, W. C. Materials Science Research, Plenum Press, New York 1 (1963)
208.
Keh, A. S. and Weissmann, S. Electron Microscopy and the Strength of Crystals, eds. G.
Thomas and J. Washburn, Interscience, New York, USA (1963) 231±300.
Kelly, P. M. and Nutting, J. Proc. Roy. Soc. London A259 (1960) 45±58.
Kennon, N. F. J. Aust. ISI 19 (1974) 3.
Kennon, N. F. Metall. Trans. 9A (1978) 57.
Kennon, N. F. and Kaye, N. A. Metall. Trans. 13A (1982) 975.
Keown, S. R., Smaill, J. S. and Erasmus, L. A. Metals Technology 3 (1976) 194.
Kerr, R., Solana, F., Bernstein, I. M. and Thompson, A. W. Metall. Trans. A 18A (1987)
1011±1022.
Kessler, H. and Pitsch, W. Acta Metall. 13 (1965) 871±874.
Kettunen, P. O. and Kocks, U. F. Scr. Metall. 1 (1967) 13±17.
Kettunen, P. O. and Kocks, U. F. Acta Metall. 20 (1972) 95±103.
Kettunen, P. O. and Lepisto
È
,T.Trans. JIM 17 (1976) 63.
Khan, S. A. and Bhadeshia, H. K. D. H. Metall. Trans. A 21A (1990a) 859±875.
Bainite in Steels
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 425 411-440
425
Khan, S. A. and Bhadeshia, H. K. D. H. Materials Science and Engineering A129 (1990b)
257±272.
Kimmins, S. T. and Gooch, D. J. Metal Science 17 (1983) 519±532.
Kimura, K., Kushima, H., Abe, F., Yagi, K. and Irie, H. Advances in turbine materials,
design and manufacturing, 4th Int. Charles Parsons Turbine Conference, eds A.
Strang, W. M. Banks, R. D. Conroy and M. J. Goulette, Institute of Materials, London
(1997) 257±269.
King, A. D. and Bell, T. Metall. Trans. A 6A (1975) 1419.
King, J. F., David, S. A., Sims, J. E. and Nasreldin, A.M. Welding Journal (July
1986) 39±47.
Kinsman, K. R. and Aaronson H. I. Discussion to Oblak and Hehemann (1967).
Kinsman, K. R. and Aaronson H. I. Metall. Trans. 1 (1970) 1485±1488.
Kinsman, K. R., Eichen, E. and Aaronson, H. I. Metall. Trans. 2 (1971) 346±348.
Kinsman, K. R. and Aaronson, H. I. Metall. Trans. 4 (1973) 959±967.
Kinsman, K. R., Eichen, E. and Aaronson, H. I. Metall. Trans. 6 (1975) 303.
Kinsman, K. R., Richman, R. H. and Verhoeven, J. D. Mater Sci. Symp. Abst., ASM (1974).
Kirkaldy, J. S. Can. J. Phys. 36 (1958) 899±925.
Kirkaldy, J. S., Forstmann, V. D. and Brigham, R. J. Canadian Metall. Quart. 1 (1962)
59±81.
Klier, E. P. and Lyman, T. Trans. AIMME 158 (1944) 394±422.
Klueh, R. L. Journal of Nuclear Materials 54 (1974a) 41±54.
Klueh, R. L. Journal of Nuclear Materials 54 (1974b) 55±63.
Klueh, R. L. and Nasreldin, A. M. Metall. Trans. A 18A (1987) 1279±1290.
Klueh, R. L. and Swindeman, R. W. Metall. Trans. A 17A (1986) 1027±1034.
Klueh, R. L., Alexander, D. J. and Kenik, E. A. Journal of Nuclear Materials 227 (1995)
11±23.
Klueh, R. L. and Alexander, D. J. Journal of Nuclear Materials 265 (1999) 262±272.
Klug, R. C., Hintz, M. B. and Rundman, K. B. Metall. Trans. A 16A (1985) 797±805.
Kluken, A. O. and Grong, O. Metall. Trans. A 20A (1989a) 1335±1349.
Kluken, A. O. and Grong, O. Recent Trends in Welding Science and Technology, eds. S. A.
David and J. Vitek, ASM International, OH, USA (1989b) 781±786.
Kluken, A. O., Grong, O. and Rorvik, G. Metall. Trans. A 21A (1990) 2047±2058.
Kluken, A. O., Grong, O. and Hjelen, J.Metall. Trans. A 22A (1991) 657±663.
Knott, J. F. JISI 204 (1966) 104.
Knott, J. F. Fundamentals of Fracture Mechanics, Butterworths, London (1973).
Knott, J. F. Advances in the Physical Metallurgy and Applications of Steels, Metals Society,
London (1981) 181
Knott, J. F. and Cottrell, A. H. JISI 201 (1963) 249±260.
Knowles, K. M. and Smith, D. A. Acta Crystallographica A38 (1982) 34±40.
Koistinen, P. P. and Marburger, R. E. Acta Metallurgica 7 (1959) 59±60.
Komai, N., Masuyama, F., Ishihara, I., Yokoyama, T., Yamadera, Y., Okada, H., Miyata,
K. and Sawaragi, Y. Advanced Heat Resistant Steels for Power Generation, San Sebas-
tian, The Institute of Materials, London (1999) 96±108.
Konoval, G., Zwell, L., Gorman, L. A. and Leslie, W. C. Nature 184 (1959) 1862±1863.
Ko, T. JISI 175 (1953) 16±18.
References
[13:44 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-refs.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 426 411-440
426