Статья
  • формат pdf
  • размер 5.22 МБ
  • добавлен 04 декабря 2011 г.
Bunch J.O., Mitchel M.R. (editors) Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results Into Design
ASTM special technical publication, STP 1497. 164 р.

This publication, Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results into Design, contains papers presented at the Symposium on Residual Stress, which was held in Salt Lake City, UT on 19-20 May, 2004. The symposium was sponsored by ASTM Inteational Committee E08 on Fatigue and Fracture. Dr. Jeffrey O. Bunch, Boeing Integrated Defense Systems, presided as symposium chairman and served as editor of this compilation. Co-chair of the symposium, was Dr. Michael R. Mitchell, Northe Arizona University.
Смотрите также

Bednar H.H. Pressure vessel design handbook

Справочник
  • формат pdf
  • размер 18.07 МБ
  • добавлен 14 января 2012 г.
Handbook, 2nd edition Krieger Publishing Compane, 1986. - 431 p. Design loads Stress categories and design limit stresses Membrane stress analysis of vessel shell components Design of tall cylindrical self-supporting prosess columns Supports for short vertical vessels Design of saddle supports for large horizontal cylindrical pressure vessels Local stresses in slells due to loads on attachments Discontinuity stresses Thermal stresses Weld design...

Bui H.D. Fracture Mechanics. Inverse Problems and Solutions

  • формат pdf
  • размер 19.02 МБ
  • добавлен 01 августа 2011 г.
Springer, 2006. - 375 p. Today, Fracture Mechanics is a well known topic within the scientific community. Applications of Fracture Mechanics can be found in various fields ranging from solid mechanics and structures to materials sciences and computational mechanics. However, most of these results apply only to linear fracture mechanics of two-dimensional and homogeneous isotropic solids. Therefore there are still incompletely solved problems; s...

Chopra O.K., Alexandreanu B., and Shac W.J. Effect of Material Heat Treatment on Fatigue Crack Initiation in Austenitic Stainless Steels in LWR Environments

  • формат pdf
  • размер 22.86 МБ
  • добавлен 04 декабря 2011 г.
65 стр. Office of Nuclear Regulatory Research U.S. Nuclear Regulatory Commission Washington, DC 20555–0001 The ASME Boiler and Pressure Vessel Code provides rules for the design of Class 1 components of nuclear power plants. Figures I–9.1 through I–9.6 of Appendix I to Section III of the Code specify design curves for applicable structural materials. However, the effects of light water reactor (LWR) coolant environments are not explicitly address...

Fischer-Cripps A.C. Introduction to Contact Mechanics

  • формат pdf
  • размер 8.03 МБ
  • добавлен 27 сентября 2011 г.
2nd edition, Springer Science+Business Media, 2007, 221 pages This book deals with the mechanics of solid bodies in contact, a subject intimately connected with such topics as fracture, hardness, and elasticity. Coverage begins with an introduction to the mechanical properties of materials, general fracture mechanics, and the fracture of brittle solids. It then provides a detailed description of indentation stress fields for both elastic and el...

High temperature fatigue behaviour of intermetallics

Статья
  • формат pdf
  • размер 471.93 КБ
  • добавлен 04 декабря 2011 г.
Статья. Опубликована в журнале Sadhana Vol. 28, Parts 3 & 4, June/August 2003 pp. 695-708 Автор - неизвестен There would be considerable benefits in developing new structural materials where high use temperatures and strength coupled with low density are minimum capabilities. Nickel and titanium aluminides exhibit considerable potential for near-term application in various branches of modern industry due to the number of property advantages t...

Kuna Meinhard, Ricoeur Andreas (Editors). IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials

Статья
  • формат pdf
  • размер 5.88 МБ
  • добавлен 04 декабря 2011 г.
319 стр. Series Editors G.M.L. Gladwell, University of Waterloo, Waterloo, Ontario, Canada R. Moreau, INPG, Grenoble, France Editorial Board J. Engelbrecht, Institute of Cybernetics, Tallinn, Estonia L.B. Freund, Brown University, Providence, USA A. Kluwick, Technische Universitt, Vienna, Austria H.K. Moffatt, University of Cambridge, Cambridge, UK N. Olhoff, Aalborg University, Aalborg, Denmark K. Tsutomu, IIDS, Tokyo, Japan D. van Campen, Techn...

Liu A.F. Mechanics and Mechanisms of Fracture: An Introduction

  • формат pdf
  • размер 22.76 МБ
  • добавлен 20 января 2012 г.
ASM International, 2005, ISBN: 0871708027, 458 pages This text is for readers who want an introductory overview on the mechanical and material factors of fracture in design analysis, material evaluation, and failure prevention. Both fundamental and practical concepts of fracture are described in terms of stress analysis and the mechanical behavior of materials. The metallurgical aspects of deformation and fracture in metals are also discussed....

Manson S.S., Halford G.R. Fatigue And Durability of Structural Materials

  • формат pdf
  • размер 16.82 МБ
  • добавлен 04 декабря 2011 г.
424 cтр. ASM International_ Materials Park, Ohio 44073-0002 Copyright 2006 by ASM International First printing, March 2006 Library of Congress Cataloging-in-Publication Data ISBN: 0-87170-825-6 Metal fatigue has long been associated with variations of stress and strain. In Wo?hler’s time, about 150 years ago, it was his identification of this fact that led him to the development of the rotating bending machine that has been used so effectively th...

Singh R.K. (ed.). Weld Cracking in Ferrous Alloys

  • формат pdf
  • размер 9.37 МБ
  • добавлен 01 января 2012 г.
Woodhead Publishing Limited, 2009. - 562 pages Weld cracks are unacceptable defects that can compromise the integrity of welded structures. Most cracks are the result of solidification, cooling and stresses that develop due to weld shrinkage. Weld cracking can lead to structural failures which at best will require remedial action and at worst can lead to loss of life. All industries that utilize welding can be affected, including nuclear, aerospa...

Virkkunen I. Thermal Fatigue of Austenitic and Duplex Stainless Steels

  • формат pdf
  • размер 11.71 МБ
  • добавлен 04 декабря 2011 г.
Acta Polytechnica Scandinavica, Mechanical Engineering Series No. 154, Espoo 2001, 115 pp. Published by the Finnish Academies of Technology Helsinki University of Technology Department of Mechanical Engineering Puumiehenkuja 3 A P.O.Box 4200 FIN-02015 HUT Finland Thermal fatigue behavior of AISI 304L, AISI 316, AISI 321, and AISI 347 austenitic stainless steels as well as 3RE60 and ACX-100 duplex stainless steels was studied. Test samples were s...