American Petroleum Instltute (API) Third Edition, May 2004. 52p.
This recommended practice is intended to assist in development of a
management program designed to promote safety and environmental
protection during the performance of offshore oil and gas and
sulphur operations.
API RP 75-2004 Recommended Practice for Development of a Safety and Environmental Management Program for Offshore Operations and Facilities
Стандарт
- формат pdf
- размер 280.14 КБ
- добавлен 06 февраля 2012 г.
Смотрите также
API RP 14E-1991 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
Стандарт- формат pdf
- размер 3.97 МБ
- добавлен 03 февраля 2012 г.
American Petroleum Instltute (API) Fifth Edition, October. 1991. Reaffirmed June 2000. 62p. This document recommends minimum requirements and guidelines for the design and installation of new piping systems on production platforms located offshore
API RP 14F-1999 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations
Стандарт- формат pdf
- размер 979.25 КБ
- добавлен 07 февраля 2012 г.
American Petroleum Instltute (API) Fourth Edition, June 1999. 104p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore
API RP 14FZ-2001 Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Zone 0, Zone 1 and Zone 2 Locations
Стандарт- формат pdf
- размер 1.03 МБ
- добавлен 07 февраля 2012 г.
American Petroleum Instltute (API) First Edition, September 2006. 127p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore when hazardous locations are classified as Zone 0, Zone 1, or Zone 2.
API RP 2A-WSD-2002 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design
Стандарт- формат pdf
- размер 2 МБ
- добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Twenty-First Edition, December 2000, Errata and Supplement 1, December 2002. 242p. This publication serves as a guide for those who are concerned with the design and construction of new platforms and for the relocation of existing platforms used for the drilling, development, and storage of hydrocarbons in offshore areas
API RP 2D-2003 Operation and Maintenance of Offshore Cranes
Стандарт- формат pdf
- размер 944.77 КБ
- добавлен 02 февраля 2012 г.
American Petroleum Institute (API) Fifth Edition, June 2003. 54p. This Recommended Practice is intended to serve as a guide to crane owners and operators in developing operating and maintenance practices and procedures for use in the safe operation of pedestal-mounted revolving cranes on fixed or oating offshore platforms, jackup drilling rigs, semisubmersible drilling rigs and other types of mobile offshore drilling units (MODUs).
API RP 2FB-2006 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading
Стандарт- формат pdf
- размер 715.9 КБ
- добавлен 08 февраля 2012 г.
American Petroleum Institute (API) First Edition, April 2002. 76p. This document provides guidelines and recommended practice for the satisfactory design of offshore structures against fire and blast loading.
API RP 2FPS-2001 Recommended Practice for Planning, Designing, and Constructing Floating Production Systems
Стандарт- формат pdf
- размер 1.8 МБ
- добавлен 02 февраля 2012 г.
American Petroleum Institute (API) First Edition, March 2001. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs).
API RP 578. Material Verification Program for New and Existing Alloy Piping Systems
Стандарт- формат pdf
- размер 216.3 КБ
- добавлен 26 января 2012 г.
The purpose of this recommended practice is to provide the guidelines for a material and quality assurance system to verify that the nominal composition of alloy components within the pressure envelope of a piping system is consistent with the selected or specified construction materials to minimize the potential for catastrophic release of toxic or hazardous liquids or vapors.
API RP 59-2006 Recommended Practice for Well Control Operations
Стандарт- формат pdf
- размер 4.11 МБ
- добавлен 06 февраля 2012 г.
American Petroleum Instltute (API) Second Edition, May 2006. 106p. The purpose of these recommended practices is to provide information that can serve as a voluntary industry guide for safe well control operations. This publication is designed to serve as a direct field aid in well control and as a technical source for teaching well control principles.
AWS QC4-89 Standard for Accreditation of Test Facilities for AWS Certified Welder Program
Стандарт- формат pdf
- размер 668.56 КБ
- добавлен 30 января 2012 г.
This standard American Welding Society (AWS). 1989. 14p. This Standard establishes minimum requirements for Test Facilities, their personnel, and equipment to qualify for accreditation to test and qualify welders in the AWS Certified Welder Program.