Стандарт
  • формат pdf
  • размер 982.62 КБ
  • добавлен 18 января 2012 г.
API RP 651 - 2007 Cathodic Protection of Aboveground Petroleum Storage Tanks (Eng)
American Petroleum Institute (API) Third Edition, January 2007. 46p. The purpose of this recommended practice is to present procedures and practices for achieving effective corrosion control on aboveground storage tank bottoms through the use of cathodic protection. It contains provisions for the application of cathodic protection to existing and new storage tanks. Corrosion control methods based on chemical control of the environment or the use of protective coatings are not covered in detail.
Смотрите также

API 579-2/ASME FFS-2 2009 Fitness-For-Service Example Problem Manual

Стандарт
  • формат pdf
  • размер 3.93 МБ
  • добавлен 10 декабря 2011 г.
374 стр. American Petroleum Institute, The American Society of Mechanical Engineers, AUGUST 11, 2009 Fitness-For-Service (FFS) assessments in API 579-1/ASME FFS-1 Fitness-For-Service are engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage or that may be operating under specific conditions that could produce a failure. API 579-1/ASME FFS-1 provides guidance...

API RP 1110-2007 Pressure Testing of Steel Pipelines for the Transportation of Gas, Petroleum Gas, Hazardous Liquids, Highly Volatile Liquids or Carbon Dioxide

Стандарт
  • формат pdf
  • размер 1.11 МБ
  • добавлен 13 декабря 2011 г.
30 стр. American Petroleum Institute, Fifth Edition, June 2007 This Recommended Practice (RP) provides guidelines for pressure testing steel pipelines for the transportation of gas, petroleum gas, hazardous liquids, highly volatile liquids or carbon dioxide. The RP provides guidance so that: a. Pipeline operators can select a pressure test suitable for the conditions under which the test will be conducted. This includes, but is not limited to, pi...

API RP 2A-WSD-2007 Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms-Working Stress Design

Стандарт
  • формат pdf
  • размер 4.61 МБ
  • добавлен 13 декабря 2011 г.
288 стр. American Petroleum Institute, Errata And Supplement 3, October 2007 This publication serves as a guide for those who are concerned with the design and construction of new platforms and for the relocation of existing platforms used for the drilling, development, and storage of hydrocarbons in offshore areas. In addition, guidelines are provided for the assessment of existing platforms in the event that it becomes necessary to make a deter...

API Std 520-2008 Sizing, Selection, and Installation of Pressure-relieving Devices in Refineries: Part I-Sizing and Selection

Стандарт
  • формат pdf
  • размер 3.52 МБ
  • добавлен 08 декабря 2011 г.
148 стр. EIGHTH EDITION, DECEMBER 2008 This standard applies to the sizing and selection of pressure relief devices used in refineries and related industries for equipment that has a maximum allowable working pressure of 15 psig (103 kPag) or greater. The pressure relief devices covered in this standard are intended to protect unfired pressure vessels and related equipment against overpressure from operating and fire contingencies. This standard...

API Std 610 Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries

Стандарт
  • формат pdf
  • размер 6.99 МБ
  • добавлен 19 ноября 2011 г.
American Petroleum Institute / 01-Sep-2010 / 220 pages. Edition: 11th. Eleventh Edition (ISO 13709:2009 Identical Adoption). Scope. This International Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This International Standard is applicable to overhung pumps, between-bearings pumps and vertically s...

API Std 620 - 2002 Design and Construction of Large, Welded, Low-Pressure Storage Tanks (Eng)

Стандарт
  • формат pdf
  • размер 1.96 МБ
  • добавлен 18 января 2012 г.
American Petroleum Institute (API) Temth Edition, February 2002. 196p. This standard is based on the accumulated knowledge and experience of purchasers and manufacturers of welded, low-pressure oil storage tanks of various sizes and capacities for internal pressures not more than 15 pounds per square inch gauge. The object of this publication is to provide a purchase specification to facilitate the manufacture and procurement of such storage tank...

API Std 650 - 2001 Welded Steel Tanks for Oil Storage (Eng)

Стандарт
  • формат pdf
  • размер 1.94 МБ
  • добавлен 18 января 2012 г.
American Petroleum Institute (API) Temth Edition, November 1998. Addendum 2, November 2001. 240p. This standard covers material, design, fabrication, erection, and testing requirements for vertical, cylindrical, aboveground, closed- and open-top, welded steel storage tanks in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates), but a higher interna...

API Std 653-2010 Tank Inspection, Repair, Alteration, and Reconstruction

Стандарт
  • формат pdf
  • размер 586.1 КБ
  • добавлен 08 декабря 2011 г.
44 стр. FOURTH EDITION, APRIL 2009 ADDENDUM 1, AUGUST 2010 This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been placed in service and addresses inspection, repair, alteration, relocation, and reconstruction. The scope is limited to the tank foundation, bottom, shell, structure, roof, attached appurtenances, and nozzl...

ASTM D 4175-05. Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants

  • формат pdf
  • размер 254.23 КБ
  • добавлен 16 июня 2010 г.
Термины принятые по ASTM для нефти, нефтепродуктов и смазок. 35 с.

NACE Standard RP0472-2005 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

Стандарт
  • формат pdf
  • размер 268.46 КБ
  • добавлен 09 декабря 2011 г.
17 стр. NACE International This standard establishes guidelines to prevent most forms of environmental cracking of weldments in carbon steel refinery equipment and piping. Weldments are defined to include the weld deposit, base metal HAZs, and adjacent base metal zones subject to residual stresses from welding. This standard covers only carbon steels classified as P-No. 1, Group 1 or 2. These classifications can be found in the ASME Boiler and Pr...