System Manual: Siemens SIMATIC HMI (WinCCv7.0: Scripting VBS, ANSI-C, VBA)
Подождите немного. Документ загружается.
ValueColumnRename property
ValueColumnRename
Renames a value column which is referenced by means of "ValueColumnIndex" attribute.
The attribute can be assigned dynamic properties by means of the name
ValueColumnRename. "ValueColumnRename" also sets a dynamic attribute
"ValueColumnName".
ValueColumnRepos property
Up/Down - ValueColumnRepos
Changes the sorting order of the value columns. "Up" and "Down" move the value column
selected up or down in the list.
The sorting order in the list determines the order of value columns after the time column if
several value columns are assigned to the same time column. Higher positions of the value
column in the list moves it to closer proximity towards the time column.
You change the order of time columns and their assigned value columns in the "Time columns"
tab.
The attribute can be assigned dynamic properties by means of the name
ValueColumnRepos.
ValueColumnShowIcon property
ValueColumnShowIcon
Enables the display of value column contents as icon.
Value Description
TRUE The content is visualized as icon.
FALSE The content is not visualized as icon.
The attribute can be assigned dynamic properties by means of the name
ValueColumnShowIcon.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
621
ValueColumnShowTitleIcon property
ValueColumnShowTitleIcon
Enables display of the value column header as icon.
Value Description
TRUE The header is displayed as icon.
FALSE The header is not displayed as icon.
The attribute can be assigned dynamic properties by means of the name
ValueColumnShowTitleIcon.
ValueColumnSort property
ValueColumnSort
Defines the sorting order of the value column referenced in "ValueColumnIndex" .
The following settings are available:
Value Description Description
0 no No sorting
1 Ascending Ascending order, starting at the lowest value.
2 Descending Descending order, starting at the highest value.
The attribute can be assigned dynamic properties by means of the name ValueColumnSort .
ValueColumnSortIndex property
ValueColumnSortIndex
Defines the sorting order of the value column referenced in "ValueColumnIndex". The sorting
criterion is removed from "ValueColumnSort" if you set a "0" value..
The attribute can be assigned dynamic properties by means of the name
ValueColumnSortIndex.
ValueColumnState property
ValueColumnState
Displays the data connection status of a selected value column in Runtime.
The attribute can be assigned dynamic properties by means of the name ValueColumnState.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
622
System Manual, 11/2008,
ValueColumnTagName property
Tag name - ValueColumnTagName
Displays the name of connected tags. You can change the tag connection using the selection
button.
The attribute can be assigned dynamic properties by means of the name
ValueColumnTagName.
ValueColumnTimeColumn property
Time column - ValueColumnTimeColumn
Specifies the time column for displaying the value column selected. Define the available time
columns in the "Time columns" tab.
The attribute can be assigned dynamic properties by means of the name
ValueColumnTimeColumn.
ValueColumnVisible property
Value columns - ValueColumnVisible
The list shows all value columns you created.
Select the value columns to be displayed in the table from the list. Value columns are displayed
if interconnected with a time column.
Click a value column entry in the list to adapt the properties, to assign the value column, and
to define the data connection.
The attribute can be assigned dynamic properties by means of the name
ValueColumnVisible .
ValueMax Property
Description
Defines the value at the end of the scale. Write/Read access.
See also
WinCC Gauge Control (Page 243)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
623
ValueMin Property
Description
Defines the value at the start of the scale. Write/Read access.
See also
WinCC Gauge Control (Page 243)
ScreenItem Object (Page 134)
Variable Property
Description
The "Index" property references a pair of columns. "Tag" defines the name of the tag which
should be connected to this column pair.
See also
WinCC Online Table Control (before WinCC V7) (Page 269)
ScreenItem Object (Page 134)
VerticalGridLines property
Vertical - VerticalGridLines
Enables the display of vertical dividers.
Value Description
TRUE Enables the displays of vertical dividers.
FALSE Disables the display of vertical dividers.
The attribute can be assigned dynamic properties by means of the name VerticalGridLines.
Visible Property
Description
witches an object visible or invisible or issues a corresponding value:
● TRUE : Object is visible
● FALSE : Object is invisible
VARIANT_BOOL (write-read access)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
624
System Manual, 11/2008,
Example:
The following example sets all the objects in the picture "NewPDL1" to invisible:
'VBS95
Dim objScreen
Dim objScrItem
Dim lngIndex
Dim strName
lngIndex = 1
Set objScreen = HMIRuntime.Screens("NewPDL1")
For lngIndex = 1 To objScreen.ScreenItems.Count
strName = objScreen.ScreenItems(lngIndex).ObjectName
Set objScrItem = objScreen.ScreenItems(strName)
objScrItem.Visible = False
Next
See also
ScreenItem Object (Page 134)
Layer Object (Page 127)
HMIRuntime Object (Page 125)
1.14.4.22 W
Warning Property
Description
Defines the start of the "Warning zone" as a scale value. Write/Read access.
See also
WinCC Gauge Control (Page 243)
ScreenItem Object (Page 134)
WarningColor Property
Description
Defines the color of the "Warning zone" o the scale. LONG write-read access.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
625
See also
WinCC Gauge Control (Page 243)
ScreenItem Object (Page 134)
WarningHigh Property
Description
Defines or returns the upper limit value for "Warning High".
In order that the limit value is monitored, the "CheckWarningHigh" property must be set to
TRUE.
The display on reaching the limit value and the type of evaluation are defined by means of the
"ColorWarningHigh" and "TypeWarningHigh" properties.
See also
Bar (Page 188)
ScreenItem Object (Page 134)
WarningLow Property
Description
Defines or returns the lower limit value for "Warning Low".
In order that the limit value is monitored, the "CheckWarningLow" property must be set to
TRUE.
The display on reaching the limit value and the type of evaluation are defined by means of the
"ColorWarningLow" and "TypeWarningLow" properties.
See also
Bar (Page 188)
ScreenItem Object (Page 134)
Width Property
Description
Sets or outputs the width of an object in pixels.
LONG
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
626
System Manual, 11/2008,
Example:
The following example doubles the width of all objects in the pictures "NewPDL1" whose name
begins with "Button":
'VBS96
Dim objScreen
Dim cmdButton
Dim lngIndex
Dim strName
lngIndex = 1
Set objScreen = HMIRuntime.Screens("NewPDL1")
For lngIndex = 1 To objScreen.ScreenItems.Count
'
'Get all "Buttons"
strName = objScreen.ScreenItems(lngIndex).ObjectName
If "Button" = Left(strName, 6) Then
Set cmdButton = objScreen.ScreenItems(strName)
cmdButton.Width = cmdButton.Width * 2
End If
Next
See also
Height Property (Page 391)
ScreenItem Object (Page 134)
WinCCStyle property
Description
Defines the style in which the object is displayed.
User Defined Shows the object according to the respective settings.
Global Shows the object in a globally defined design.
Windows Style Shows the object in Windows style.
WindowBorder Property
Description
TRUE, when the window is displayed with borders in Runtime. Read only access.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
627
See also
Picture Window (Page 191)
Application Window (Page 186)
ScreenItem Object (Page 134)
WindowMonitorNumber property
Description
Defines the number of the monitor on which the picture window is displayed. This requires that
your system supports more than one monitor.
The attribute is only effective if the "IndependentWindow" attribute is set to TRUE.
WindowPositionMode property
Description
Defines the position and scaling of the picture window on the screen. It is only effective if the
"Independent window" attribute is set to TRUE.
Standard The picture window is positioned in its original size in the configured position
on the screen.
Center The picture window is positioned in its original size, centered on the screen.
Maximize The picture window is scaled to the size of the screen.
WindowsStyle property
Description
Defines whether the object is displayed in the Windows style of WinCC version 6.2. It can only
be selected if "WinCC Classic" is chosen as the current design.
TRUE if the object is displayed in the Windows style of WinCC version 6.2.
FALSE if the object is not displayed in the Windows style of WinCC version 6.2.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
628
System Manual, 11/2008,
WindowsStyle Property
Description
TRUE, when the object complies with the general Windows style (e.g. gray buttons without
borders). BOOLEAN write-read access. Note:
● When this property is set to "True", the properties which do not comply with the Windows
style are ignored (e.g. "BorderWidth").
● On the other hand, the definition of a "BorderWidth" or a background color other than gray
causes "WindowsStyle" to receive the value"False".
● Exceptions here are the flash attributes: The definition of flash attributes does not
automatically lead to the deactivation of the "WindowsStyle" attribute.
See also
Slider (Page 223)
Button (Page 214)
ScreenItem Object (Page 134)
WindowType Property
Description
Defines the use of the message window.
● 0 - Message list: shows the currently pending messages.
● 1 - Short-term archive list: shows the archived messages.
● 2 - Long-term archive list: shows the archived messages.
● 3 - Lock list: shows the currently locked messages.
● 4 - Hit list: To display the statistical information of messages.
See also
WinCC Alarm Control (before WinCC V7) (Page 265)
ScreenItem Object (Page 134)
WithAxes Property
Description
TRUE, when the scale should be displayed. BOOLEAN write-read access.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
629
See also
WinCC Slider Control (Page 259)
ScreenItem Object (Page 134)
WithLabels Property
Description
TRUE, when the scale labels should be displayed. BOOLEAN write-read access.
See also
WinCC Slider Control (Page 259)
ScreenItem Object (Page 134)
1.14.4.23 X - Z
X/YAxisAdd property
New - X/YAxisAdd
Creates a new X or Y axis.
The X axis attribute can be assigned dynamic properties by means of the name XAxisAdd .
The Y axis attribute can be assigned dynamic properties by means of the name YAxisAdd .
X/YAxisAlign property
Alignment - X/YAxisAlign
Defines the alignment mode for a selected axis.
The following settings are available for the X axis:
Value Description Description
0 Bottom The X axis selected is displayed below the trend.
1 Top The X axis selected is displayed above the trend.
The X axis attribute can be assigned dynamic properties by means of the name XAxisAlign.
The following settings are available for the Y axis:
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
630
System Manual, 11/2008,