System Manual: Siemens SIMATIC HMI (WinCCv7.0: Scripting VBS, ANSI-C, VBA)
Подождите немного. Документ загружается.
See also
Button (Page 214)
Static text (Page 178)
Text list (Page 210)
Radio box (Page 219)
Check box (Page 217)
I/O Field (Page 196)
ScreenItem Object (Page 134)
AdaptPicture Property
Description
Defines whether the picture displayed in a picture window should be adapted to the size of the
picture window in Runtime or not. Read only access.
TRUE, when the picture adapts to the picture window size.
FALSE, when the picture does not adapt to the picture window size.
See also
Picture Window (Page 191)
ScreenItem Object (Page 134)
AdaptSize Property
Description
Defines whether the picture window should adapt to the size of the picture displayed in it during
Runtime or not. Read only access.
TRUE, when the picture window adapts to the picture size.
FALSE, when the picture window does not adapt to the picture size.
See also
Picture Window (Page 191)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
281
AdjustRuler Property
Description
Specifies if the ruler window should be adjusted to the trend window upon each appearance.
TRUE, if you move the ruler window and make it appear and disappear again, it will be
displayed in its original position and its original size.
See also
WinCC Online Trend Control (before WinCC V7) (Page 271)
ScreenItem Object (Page 134)
Al - Ap
AlarmID property
Description
Returns the AlarmID of the Alarm object. The AlarmID is unique, and is assigned by the system.
AlarmID (readonly)
See also
Alarms object (list) (Page 116)
AlarmHigh Property
Description
Defines the top limit value at which an alarm should be triggered or returned.
The type of the evaluation (in percent or absolute) is defined in the "TypeAlarmHigh"
property.
The "CheckAlarmHigh" property determines whether the monitoring for this limit value is
activated.
See also
Bar (Page 188)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
282
System Manual, 11/2008,
AlarmLogs Property
Description
Returns an object of type "AlarmLogs".
AlarmLogs (read-only)
See also
HMIRuntime Object (Page 125)
AlarmLow Property
Description
Defines the bottom limit value at which an alarm should be triggered or returned.
The type of the evaluation (in percent or absolute) is defined in the "TypeAlarmLow"
property.
The "CheckAlarmLow" property determines whether the monitoring for this limit value is
activated.
See also
Bar (Page 188)
ScreenItem Object (Page 134)
Alignment Property
Description
Defines or returns the representation of the scale (left/right or top/bottom) according to the
position of the bar graph object. The "Scaling" property must be set to TRUE for the scale to
be displayed.
See also
Bar (Page 188)
ScreenItem Object (Page 134)
AlignmentLeft Property
Description
Defines or returns the horizontal alignment of the text. Value range from 0 to 2.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
283
0 = left
1 = centered
2 = right
See also
Group Display (Page 208)
Static text (Page 178)
Text list (Page 210)
Radio box (Page 219)
Check box (Page 217)
Button (Page 214)
I/O Field (Page 196)
ScreenItem Object (Page 134)
AlignmentTop Property
Description
Defines or returns the vertical alignment of the text. Value range from 0 to 2.
0 = top
1 = centered
2 = bottom
See also
Group Display (Page 208)
Static text (Page 178)
Text list (Page 210)
Radio box (Page 219)
Check box (Page 217)
Button (Page 214)
I/O Field (Page 196)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
284
System Manual, 11/2008,
AllowPersistence Property
Description
TRUE, when settings regarding persistence are possible. BOOLEAN write-read access.
See also
WinCC Online Trend Control (before WinCC V7) (Page 271)
WinCC Online Table Control (before WinCC V7) (Page 269)
WinCC Function Trend Control (before WinCC V7) (Page 267)
ScreenItem Object (Page 134)
AllowXAxisColor - Property
Description
TRUE if the defined color of the common X-axis is displayed in runtime. BOOLEAN write-read
access.
AllServer Property
Description
Defines that the data to be displayed in the message window is required by all servers
participating in a distributed system on which Alarm Logging is activated. Write/Read access.
See also
WinCC Alarm Control (before WinCC V7) (Page 265)
ScreenItem Object (Page 134)
AllServer property
All servers - AllServer
Selects all servers whose packages were loaded and on which "Alarm Logging Runtime" is
activated in the startup list.
Value Description
TRUE All servers are activated.
FALSE Activates only the servers entered in "Server selection".
The attribute can be assigned dynamic properties by means of the name AllServer.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
285
Analog Property
Description
TRUE, when the clock is to be displayed as an analog clock. BOOLEAN write-read access.
See also
WinCC Digital/Analog Clock (Page 239)
ScreenItem Object (Page 134)
AnchorRuler Property
Description
TRUE if the ruler window is firmly linked to the curve window. BOOLEAN write-read access.
AngleAlpha Property
Description
Defines or returns depth angle a for the 3D-effect of the "3DBarGraph" object. Value range in
degrees from 0 to 90.
See also
3D Bar (Page 182)
ScreenItem Object (Page 134)
AngleBeta Property
Description
Defines or returns depth angle b for the 3D-effect of the "3DBarGraph" object. Value range in
degrees from 0 to 90.
See also
3D Bar (Page 182)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
286
System Manual, 11/2008,
AngleMax Property
Description
Defines or returns the angle on the scale at which the scale graduation ends. LONG write-read
access.
The start and end of the scale graduation are described by the attributes "AngleMin" and
"AngleMax" in angular degrees. AngleMin < AngleMax applies.
Angle 0 degrees is at the right side of the horizontal diameter of the graduated scale disk.
Positive angle values are counted in a counterclockwise direction.
See also
WinCC Gauge Control (Page 243)
ScreenItem Object (Page 134)
AngleMin Property
Description
Defines or returns the angle on the scale at which the scale graduation begins. LONG write-
read access.
See also
WinCC Gauge Control (Page 243)
ScreenItem Object (Page 134)
Application Property
Description
Returns the Graphics Designer application when the application property is used without an
object
identifier. If the application property is used with object identifier, it returns an application
object which displays the application with which the defined object was created. Read only
access.
See also
Application Window (Page 186)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
287
ApplyProjectSettings property
Apply project settings - ApplyProjectSettings
Activates the project settings derived from "Alarm Logging".
Value Description
TRUE The "Apply project settings" check box is activated. The message blocks configured
in "Alarm Logging" and their properties are activated in AlarmControl. The message
blocks are displayed with these properties in the message window.
FALSE The "Apply project settings" check box is deactivated. You can add or remove message
blocks, or edit their properties.
The attribute can be assigned dynamic properties by means of the name
ApplyProjectSettings.
Ar - Ax
Archive Property
Description
The "Index" property references a pair of columns. "Archive" defines process archive values
linked to the column pair. The name of the process value archive is specified in the following
form: Server name::Archive name
See also
WinCC Online Table Control (before WinCC V7) (Page 269)
ScreenItem Object (Page 134)
ArchiveName property
Name - ArchiveName
Specifies the user archive or view to be displayed. Open the "Package Browser" dialog for
configuring an archive or a view by clicking the button.
The attribute can be assigned dynamic properties by means of the name ArchiveName.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
288
System Manual, 11/2008,
Assignments Property
Description
A list which contains the assignments between the output values and the actual output texts
to be output.
The assignments depend on the set list type. The list type is defined with the ListType property.
Read only access.
See also
Text list (Page 210)
ScreenItem Object (Page 134)
AssumeOnExit Property
Description
TRUE, if the entered text is assumed upon exiting the entry field (e.g., with the key or mouse
click). BOOLEAN write-read access.
See also
I/O Field (Page 196)
Text list (Page 210)
ScreenItem Object (Page 134)
AssumeOnFull Property
Description
TRUE, when the content of the input field is full (specified number of characters have been
entered) and should be exited automatically and the input accepted. BOOLEAN write-read
access.
See also
I/O Field (Page 196)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
289
AutoCompleteColumns property
Show blank columns - AutoCompleteColumns
Adds blank columns if the Control width is greater than the width of columns configured.
Value Description
TRUE Enables the display of blank columns.
FALSE Disables the display of blank columns.
The attribute can be assigned dynamic properties by means of the name
AutoCompleteColumns.
AutoCompleteRows property
Show blank rows - AutoCompleteRows
Enables the insertion of blank rows if the Control length is greater than the number of rows
configured.
Value Description
TRUE Enables the display of blank rows.
FALSE Disables the display of blank rows.
The attribute can be assigned dynamic properties by means of the name
AutoCompleteRows.
AutoPosition property
Automatic positioning - AutoPosition
Defines whether to position the RulerControl exactly below the source control.
The following settings are available:
Value Description
TRUE The RulerControl is positioned exactly below the source control.
FALSE The RulerControl is displayed in accordance with your configuration of the control position.
The attribute can be assigned dynamic properties by means of the name AutoPosition.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
290
System Manual, 11/2008,