System Manual: Siemens SIMATIC HMI (WinCCv7.0: Scripting VBS, ANSI-C, VBA)
Подождите немного. Документ загружается.
End With
End Sub
See also
DataFormat Property (Page 2089)
IOField Object (Page 1886)
OutputValue Property
Description
Defines or returns presetting for the value to be displayed.
This value is used in Runtime when the associated tag cannot be connected or updated when
a picture is started.
Example:
The "IOFieldConfiguration()" procedure accesses the properties of the I/O field. In this example
the output value will be set to "00":
Sub IOFieldConfiguration()
'VBA660
Dim objIOField As HMIIOField
Set objIOField = ActiveDocument.HMIObjects.AddHMIObject("IOField1", "HMIIOField")
With objIOField
.OutputValue = "00"
End With
End Sub
See also
TextList Object (Page 1964)
IOField Object (Page 1886)
4.4.8.12 P-Q
Parent Property
Description
Returns the higher-ranking object in the specified object. Read only access.
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
2241
Example:
In the following example a copy of the active picture is created and the name of the picture is
then output with the aid of the Parent property:
Sub ExampleForParent()
'VBA661
Dim objView As HMIView
Set objView = ActiveDocument.Views.Add
MsgBox objView.Parent.Name
End Sub
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
2242
System Manual, 11/2008,
See also
Toolbars Object (Listing) (Page 1968)
Menu Object (Page 1903)
Document Object (Page 1847)
Views Object (Listing) (Page 1993)
View Object (Page 1991)
VariableTriggers Object (Listing) (Page 1990)
VariableTrigger Object (Page 1989)
VariableStateValues Object (Listing) (Page 1987)
VariableStateValue Object (Page 1986)
Trigger Object (Page 1974)
ToolbarItems Object (Listing) (Page 1973)
ToolbarItem Object (Page 1970)
Toolbar Object (Page 1967)
TextList Object (Page 1964)
SymbolLibraries Object (Listing) (Page 1963)
SymbolLibrary Object (Page 1962)
StatusDisplay Object (Page 1959)
StaticText Object (Page 1956)
SourceLink Object (Page 1955)
Slider object (Page 1952)
Selection Object (Listing) (Page 1949)
ScriptInfo Object (Page 1948)
RoundRectangle Object (Page 1945)
RoundButton Object (Page 1942)
Rectangle Object (Page 1939)
Properties Object (Listing) (Page 1931)
Property Object (Page 1932)
PolyLine Object (Page 1928)
Polygon Object (Page 1925)
PictureWindow Object (Page 1919)
PieSegment Object (Page 1922)
OptionGroup Object (Page 1916)
OLEObject Object (Page 1914)
MenuItems Object (Listing) (Page 1909)
MenuItem Object (Page 1906)
Menus Object (Listing) (Page 1904)
Line Object (Page 1897)
Layers Object (Listing) (Page 1895)
Layer Object (Page 1894)
LanguageTexts Object (Listing) (Page 1893)
LanguageText Object (Page 1892)
LanguageFonts Object (Listing) (Page 1890)
LanguageFont Object (Page 1889)
IOField Object (Page 1886)
HMIObjects Object (Listing) (Page 1884)
HMIObject Object (Page 1882)
HMIDefaultObjects Object (Listing) (Page 1878)
GroupedObjects Object (Listing) (Page 1877)
GroupDisplay Object (Page 1874)
Group Object (Page 1873)
GraphicObject Object (Page 1870)
FolderItems Object (Listing) (Page 1868)
FolderItem Object (Page 1867)
Events Object (Listing) (Page 1863)
Event Object (Page 1862)
EllipseSegment Object (Page 1859)
EllipseArc Object (Page 1856)
Ellipse Object (Page 1853)
DynamicDialog Object (Page 1851)
Documents Object (Listing) (Page 1850)
DirectConnection Object (Page 1845)
DestLink Object (Page 1843)
DataLanguages Object (Listing) (Page 1842)
DataLanguage Object (Page 1841)
CustomizedObject Object (Page 1839)
ConnectionPoints Object (Listing) (Page 1837)
CircularArc Object (Page 1831)
Circle Object (Page 1828)
CheckBox Object (Page 1827)
Button Object (Page 1824)
BitResultInfo Object (Page 1823)
BinaryResultInfo Object (Page 1822)
BarGraph Object (Page 1819)
ApplicationWindow Object (Page 1817)
Actions Object (Listing) (Page 1810)
3DBarGraph Object (Page 1805)
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
2243
PasswordLevel Property
Description
Defines the authorization for operation (e.g. no input or no triggering actions) of the object.
PasswordLevel Assigned Value
<No Access Security> 0
User Administration 1
Value input 2
Process controlling 3
Picture editing 4
Screen change 5
Window selection 6
Hard copy 7
Confirm alarms 8
Lock alarms 9
Free alarms 10
Message editing 11
Start archive 12
Stop archive 13
Edit archive values 14
Archive editing 15
Action editing 16
Project Manager 17
Activate remote 1000
Configure remote 1001
Just monitor 1002
You must first define the operator authorizations in the User Administrator.
Example:
--
See also
HMIObject Object (Page 1882)
Path Property
Description
Returns the full path of the folder in which the specified picture is stored. Read only access.
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
2244
System Manual, 11/2008,
Example:
In this example the path to the folder of the active picture will be output:
Sub ShowDocumentPath()
'VBA663
MsgBox ActiveDocument.Path
End Sub
See also
Document Object (Page 1847)
Pathname Property
Description
Returns the internal access path to the Components Library for the specified object of the
"FolderItem" type. Read only access.
Example:
In this example the internal access path is output for the "PC" object contained in the Global
Components Library:
Sub ShowInternalNameOfFolderItem()
'VBA664
Dim objGlobalLib As HMISymbolLibrary
Set objGlobalLib = Application.SymbolLibraries(1)
MsgBox objGlobalLib.FolderItems(2).Folder(2).Folder.Item(1).PathName
End Sub
See also
FolderItem Object (Page 1867)
Accessing the component library with VBA (Page 1593)
PicDeactReferenced-Eigenschaft
Description
TRUE if the picture assigned to the "Deactivated" status is to be saved in the RoundButton
object.
Otherwise, only the associated object reference is saved. BOOLEAN write-read access.
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
2245
Example:
The "RoundButtonConfiguration()" procedure accesses the properties of the RoundButton. In
this example the picture assigned to the "Deactivated" status will be referenced:
Sub RoundButtonConfiguration()
'VBA665
Dim objRoundButton As HMIRoundButton
Set objRoundButton = ActiveDocument.HMIObjects.AddHMIObject("RButton1", "HMIRoundButton")
With objRoundButton
.PicDeactReferenced = False
End With
End Sub
See also
RoundButton Object (Page 1942)
PicDeactTransparent Property
Description
Defines or returns which color of the bitmap object (.bmp, .dib) assigned to the "Disabled"
status should be set to "transparent". LONG write-read access.
The color is only set to "Transparent" if the value of the "PicDeactUseTransColor" property is
"True".
Determination of Color Value
The color is displayed in RGB format (Red, Green, Blue). Specify the corresponding decimal
value for each of the three RGB values (value range from 0 to 255).
Use VBA function "RGB" to assign a color to a property. The color "red", for example, is
represented as follows: RGB(255, 0, 0)
Example:
The "RoundButtonConfiguration()" procedure accesses the properties of the RoundButton. In
this
example the color "Red" assigned in the Bitmap object is to be displayed transparent when
in the "Deactivated" status.
Sub RoundButtonConfiguration()
'VBA666
Dim objRoundButton As HMIRoundButton
Set objRoundButton = ActiveDocument.HMIObjects.AddHMIObject("RButton1", "HMIRoundButton")
With objRoundButton
.PicDeactTransparent = RGB(255, 0, 0)
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
2246
System Manual, 11/2008,
.PicDeactUseTransColor = True
End With
End Sub
See also
PicDeactUseTransColor Property (Page 2247)
RoundButton Object (Page 1942)
PicDeactUseTransColor Property
Description
TRUE, when the transparent color defined by the "PicDeactTransparent" property for the
"Disable" status should be used. BOOLEAN write-read access.
Example:
The "RoundButtonConfiguration()" procedure accesses the properties of the RoundButton. In
this
example the color "Red" assigned in the Bitmap object is to be displayed transparent when
in the "Deactivated" status:
Sub RoundButtonConfiguration()
'VBA667
Dim objRoundButton As HMIRoundButton
Set objRoundButton = ActiveDocument.HMIObjects.AddHMIObject("RButton1", "HMIRoundButton")
With objRoundButton
.PicDeactTransparent = RGB(255, 0, 0)
.PicDeactUseTransColor = True
End With
End Sub
See also
PicDeactTransparent Property (Page 2246)
RoundButton Object (Page 1942)
PicDownReferenced Property
Description
TRUE if the picture assigned to the "On" status is to be saved in the RoundButton object.
Otherwise, only the associated object reference is saved. BOOLEAN write-read access.
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
2247
Example:
The "RoundButtonConfiguration()" procedure accesses the properties of the RoundButton. In
this example the picture assigned to the "On" status will be referenced:
Sub RoundButtonConfiguration()
'VBA668
Dim objRoundButton As HMIRoundButton
Set objRoundButton = ActiveDocument.HMIObjects.AddHMIObject("RButton1", "HMIRoundButton")
With objRoundButton
.PicDownReferenced = False
End With
End Sub
See also
RoundButton Object (Page 1942)
PicDownTransparent Property
Description
Defines or returns which color of the bitmap object (.bmp, .dib) assigned to the "On" status
should be set to "transparent". LONG write-read access.
The color is only set to "Transparent" if the value of the "PicDownUseTransColor" property is
"True".
Determination of Color Value
The color is displayed in RGB format (Red, Green, Blue). Specify the corresponding decimal
value for each of the three RGB values (value range from 0 to 255).
Use VBA function "RGB" to assign a color to a property. The color "red", for example, is
represented as follows: RGB(255, 0, 0)
Example:
The "RoundButtonConfiguration()" procedure accesses the properties of the RoundButton. In
this example the color "Yellow" assigned in the Bitmap object is to be displayed transparent
when in the "Deactivated" status.
Sub RoundButtonConfiguration()
'VBA669
Dim objRoundButton As HMIRoundButton
Set objRoundButton = ActiveDocument.HMIObjects.AddHMIObject("RButton1", "HMIRoundButton")
With objRoundButton
.PicDownTransparent = RGB(255, 255, 0)
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
2248
System Manual, 11/2008,
.PicDownUseTransColor = True
End With
End Sub
See also
PicDownUseTransColor Property (Page 2249)
RoundButton Object (Page 1942)
PicDownUseTransColor Property
Description
TRUE, when the transparent color defined by the "PicDownTransparent" property for the "On"
status should be used. BOOLEAN write-read access.
Example:
The "RoundButtonConfiguration()" procedure accesses the properties of the RoundButton. In
this example the color "Yellow" assigned in the Bitmap object is to be displayed transparent
when in the "Deactivated" status:
Sub RoundButtonConfiguration()
'VBA670
Dim objRoundButton As HMIRoundButton
Set objRoundButton = ActiveDocument.HMIObjects.AddHMIObject("RButton1", "HMIRoundButton")
With objRoundButton
.PicDownTransparent = RGB(255, 255, 0)
.PicDownUseTransColor = True
End With
End Sub
See also
PicDownTransparent Property (Page 2248)
RoundButton Object (Page 1942)
PicReferenced Property
Description
TRUE if the picture assigned to the GraphicObject object is to be referenced and not saved in
the object. BOOLEAN write-read access.
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
2249
Example:
The "GraphicObjectConfiguration()" procedure accesses the properties of the graphics object.
In this example the assigned picture will be referenced:
Sub GraphicObjectConfiguration()
'VBA671
Dim objGraphicObject As HMIGraphicObject
Set objGraphicObject = ActiveDocument.HMIObjects.AddHMIObject("GraphicObject1",
"HMIGraphicObject")
With objGraphicObject
.PicReferenced = True
End With
End Sub
See also
GraphicObject Object (Page 1870)
PicTransColor Property
Description
Defines or returns which color of the assigned bitmap object (.bmp, .dib) should be set to
"transparent". LONG write-read access.
The color is only set to "Transparent" if the value of the "PicUseTransColor" property is "True".
Determination of Color Value
The color is displayed in RGB format (Red, Green, Blue). Specify the corresponding decimal
value for each of the three RGB values (value range from 0 to 255).
Use VBA function "RGB" to assign a color to a property. The color "red", for example, is
represented as follows: RGB(255, 0, 0)
Example:
The "GraphicObjectConfiguration()" procedure accesses the properties of the graphics object.
In this example the color "Blue" assigned in the Bitmap object is to be displayed transparent:
Sub GraphicObjectConfiguration()
'VBA672
Dim objGraphicObject As HMIGraphicObject
Set objGraphicObject = ActiveDocument.HMIObjects.AddHMIObject("GraphicObject1",
"HMIGraphicObject")
With objGraphicObject
.PicTransColor = 16711680
.PicUseTransColor = True
VBA for Automated Configuration
4.4 The object model of the Graphics Designer
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
2250
System Manual, 11/2008,