Teng J.G., Rotler J.M. (eds.) Buckling of Thin Metal Shells

  1. Файлы
  2. Академическая и специальная литература
  3. Механика
  4. Строительная механика
  5. Теория пластин и оболочек
Строительная механика
  • формат pdf
  • размер 8.06 МБ
  • добавлен 06 апреля 2011 г.
Teng J.G., Rotler J.M. (eds.) Buckling of Thin Metal Shells
Spon Press. 2004. 518 p.
Buckling of thin shells: an overview
Cylindrical shells under axial compression
Cylindrical shells above local supports
Settlement beneath cylindrical shells
Cylindrical shells under uniform exteal pressure
Cylindrical shells under non-uniform exteal pressure
Tall cylindrical shells under wind pressure
Cylindrical shells under torsional and transverse shear
Cylindrical shells under global shear loading
Cylindrical shells under combined loading: axial compression, exteal pressure and torsional shear
Stiffened cylindrical shells
Large diameter fabricated steel tubes
Shell junctions
Rings at shell junctions
A probabilistic approach to design shell structures
Смотрите также

ASM Metals HandBook Vol. 15 - Casting

  • формат pdf
  • размер 48.79 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 2002 p. The Handbook is structured in ten Sections, along with a Glossary of Terms. The reader is first introduced to the historical development of metal casting, as well as to the advantages of castings over parts produced by other manufacturing processes, their applications, and the current market size of the industry. Then, the thermodynamic relationships and properties of liquid metals and the physical chemistry of g...

ASM Metals HandBook Vol. 7 - Powder Metal Technologies and Applications

  • формат pdf
  • размер 59.46 МБ
  • добавлен 16 февраля 2011 г.
ASM International, 2002, 2762 p. On behalf of the ASM Handbook Committee, it is a pleasure to introduce this fully revised and updated edition of Volume 7, Powder Metal Technologies and Applications as part of the ASM Handbook series. Since the first publication of Volume 7 in 1984 as part of the 9th Edition Metals Handbook, substantial new methods, technologies, and applications have occurred in powder metallurgy. These developments reflect the...

Gubanov V.A., Ivanovsky A.L., Zhukov V.P. Electronic Structure of Refractory Carbides and Nitrides

  • формат pdf
  • размер 5.91 МБ
  • добавлен 03 апреля 2011 г.
Cambridge University Press, 1994. 272 p. ISBN:0521418852 This book presents a systematic description of the electronic and physico-chemical properties of transition metal carbides and nitrides. The discussion is devoted to the theoretical modeling of refractory carbides and nitrides and alloys based on them, and the authors uniquely make use of computational methods to calculate their spectroscopic, electric, magnetic, superconducting, thermody...

L?tjering G., Williams J.C. Titanium

  • формат pdf
  • размер 13.92 МБ
  • добавлен 15 января 2012 г.
Springer-Verlag Berlin, 2003, ISBN: 3540713972, 442 pages Engineering Materials and Processes This comprehensive summary of the current state of the art of titanium addresses all aspects of titanium. It is all covered, from the magical metal’s basic characteristics and physical metallurgy to the correlations between processing, microstructure and properties. Richly illustrated with more than 300 figures, this compendium takes a conceptual ap...

McEvily M.J. Metal Failures: Mechanisms, Analysis, Prevention

  • формат djvu
  • размер 2.5 МБ
  • добавлен 20 января 2012 г.
Wiley-Interscience, 2002, Pages: 336, ISBN 0471414360 Comprehensive coverage of both the "how" and "why" of metal failures Metal Failures gives engineers the intellectual tools and practical understanding needed to analyze failures from a structural point of view. Its proven methods of examination and analysis enable investigators to: Reach correct, fact-based conclusions on the causes of metal failures Present and defend these conclusions...

Mileiko S.T. Metal and Ceramic Based Composites, Volume 12

  • формат pdf
  • размер 30.05 МБ
  • добавлен 17 марта 2011 г.
Elsevier Science; 1997. 704 p. ISBN-10: 0444828141 Modern scientific and technological fields are frequently of an interdisciplinary nature, and the field of fibrous composites is no exception. Unlike fibre-reinforced plastics, the family of metal- and ceramic-based composites is still quite a new group of materials with a large variety of mechanical and physical properties. Up until now it has been difficult to produce these materials as the n...

Murakami Y. Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions

  • формат pdf
  • размер 10.66 МБ
  • добавлен 28 декабря 2011 г.
Elsevier Science, 2002, 369 pages This work is an English translation of the original Japanese, first published in 1993, but with extra chapters on fatigue failure of steels and the effect of surface roughness on fatigue strength. The first part of this book includes a concise explanation of metal fatigue. The methodology employed is based on important and reliable experimental results and may be usefully applied to other fatigue problems not d...

Peters S.T. Handbook of Composites

  • формат djvu
  • размер 47.74 МБ
  • добавлен 08 января 2012 г.
Изд-во: Chapman&Hall, Second Edition, 1998. - 1120 pages. Язык: английский. This book by presenting, in a single volume, many of the recent advances in he field of composite materials. The main focus of this book is on polymeric matrix, metal matrix, and ceramic matrix composites. The book treats a wide range of subjects.

Singh R. Introduction to Basic Manufacturing Processes and Workshop Technology

  • формат pdf
  • размер 4.01 МБ
  • добавлен 05 января 2012 г.
New Age International Ltd, 2006, 493 pages Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The knowledge of manufacturing practices is highly essential for all engineers and technocrats for familiarizing themselves with modern concepts of manufacturing technologies. The basic need is to provide theoretical and practical knowledge of manufacturing processes...

Totten G.E., MacKenzie D.S. (Eds.) Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes

  • формат pdf
  • размер 16.85 МБ
  • добавлен 05 января 2012 г.
Marcel Dekker Ltd, 2003, 1296 pages The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length considerat...
  • 2008 — 2024 «СтудМед»