• формат pdf
  • размер 16.85 МБ
  • добавлен 05 января 2012 г.
Totten G.E., MacKenzie D.S. (Eds.) Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes
Marcel Dekker Ltd, 2003, 1296 pages

The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length consideration of quenching.

Aluminum physical metallurgy and analytical techniques
Introduction to Aluminum
Properties of Pure Aluminum
Physical Metallurgy and the Effect of Alloying Additions in Aluminum Alloys
Recrystallization and Grain Growth
Hardening, Annealing, and Aging
Residual Stress and Distortion

Processing of aluminum
Rolling of Aluminum
Extrusion
Aluminum Welding
Casting Design
Modeling of the Filling, Solidification, and Cooling of Shaped Aluminum Castings
Castings
Molten Metal Processing
Shaping by Pulling from the Melt
Low-g Crystallization for High-Tech Castings
Designing for Aluminum Forging
Forging
Sheet Forming of Aluminum Alloys
Heat Treating Processes and Equipment
Quenching
Machining
Superplastic Forming
Aluminum Chemical Milling
Powder Metallurgy
Похожие разделы
Смотрите также

ASM Metals HandBook Vol. 14 - Forming and Forging

  • формат pdf
  • размер 56.24 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 2110 p. Forming and forging processes are among the oldest and most important of materials-related technologies. Volume 14 of the 9th Edition of Metals Handbook describes these processes comprehensively, with accuracy and clarity. Today, industry must continuously evaluate the costs of competitive materials and the operations necessary for converting each material into finished products. Manufacturing economy with no sa...

ASM Metals HandBook Vol. 15 - Casting

  • формат pdf
  • размер 48.79 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 2002 p. The Handbook is structured in ten Sections, along with a Glossary of Terms. The reader is first introduced to the historical development of metal casting, as well as to the advantages of castings over parts produced by other manufacturing processes, their applications, and the current market size of the industry. Then, the thermodynamic relationships and properties of liquid metals and the physical chemistry of g...

ASM Metals HandBook Vol. 16 - Machining

  • формат pdf
  • размер 26.46 МБ
  • добавлен 17 февраля 2011 г.
ASM International, 2002, 1089 p. The present Volume of Metals Handbook has been structured to provide answers to the questions and challenges associated with current machining technology. Following a general introduction to machining processes, 9 major sections containing 78 articles cover all aspects of material removal. Much of this material is new. In fact, 30 articles in this Volume were not included in its 8th Edition predecessor. Noteworth...

ASM Metals HandBook Vol. 7 - Powder Metal Technologies and Applications

  • формат pdf
  • размер 59.46 МБ
  • добавлен 16 февраля 2011 г.
ASM International, 2002, 2762 p. On behalf of the ASM Handbook Committee, it is a pleasure to introduce this fully revised and updated edition of Volume 7, Powder Metal Technologies and Applications as part of the ASM Handbook series. Since the first publication of Volume 7 in 1984 as part of the 9th Edition Metals Handbook, substantial new methods, technologies, and applications have occurred in powder metallurgy. These developments reflect the...

L?tjering G., Williams J.C. Titanium

  • формат pdf
  • размер 13.92 МБ
  • добавлен 15 января 2012 г.
Springer-Verlag Berlin, 2003, ISBN: 3540713972, 442 pages Engineering Materials and Processes This comprehensive summary of the current state of the art of titanium addresses all aspects of titanium. It is all covered, from the magical metal’s basic characteristics and physical metallurgy to the correlations between processing, microstructure and properties. Richly illustrated with more than 300 figures, this compendium takes a conceptual ap...

Meyrick G., Wagoner R.H. (compilers) Steel Class Notes and lecture material For MSE 651.01 Physical Metallurgy of Steel

  • формат pdf
  • размер 1.31 МБ
  • добавлен 09 ноября 2011 г.
The Ohio State University, 173 p. This document is intended to augment formal lectures on the general topic of the physical metallurgy of steels, presented within the MSE Department during the Fall Quarter, 1998. It is based on a variety of texts and published articles and also on personal experience. Specific references to sources are made within the document. However, the material is often in the form of knowledge that has been accumulated by t...

Polmear I. Light Alloys: From Traditional Alloys to Nanocrystals

  • формат pdf
  • размер 9.23 МБ
  • добавлен 18 января 2012 г.
4th Edition,Butterworth-Heinemann, Elsevier, 2006, ISBN: 0750663715, Pages: 421 The definitive overview of the science and metallurgy of aluminum, magnesium, titanium and beryllium alloys, this is the only book available covering the background materials science, properties, manufacturing processes and applications of these key engineering metals in a single accessible volume. Use of these metals is now more widespread than ever, and they are r...

Smallman R.E., Bishop R.J. Modern Physical Metallurgy and Materials Engineering: Science, process, applications

  • формат pdf
  • размер 8.6 МБ
  • добавлен 20 января 2012 г.
6 edition, Butterworth - Heinemann, 1999, 438 pages, ISBN: 0750645644 For many years, various editions of Smallman's Modern Physical Metallurgy have served throughout the world as a standard undergraduate textbook on metals and alloys. In 1995, it was rewritten and enlarged to encompass the related subject of materials science and engineering and appeared under the title Metals & Materials: Science, Processes, Applications offering a compre...

Smallman R.E., Ngan A.H.W. Physical Metallurgy and Advanced Materials

  • формат pdf
  • размер 6.06 МБ
  • добавлен 24 марта 2011 г.
Physical Metallurgy andAdvanced Materials(Seventh edition 2007,Published by Elsevier Ltd). Language: English, 673 pages. The book has evolved from the earlier editions of Modern PhysicalMetallurgy (1962, 1970, 1985) and later editions of Modern Physical Metallurgy and Materials Engineering (1995, 1999). Additions have been made to almost every chapter, which now include a number of worked examples in the text to illustrate and emphasize a partic...

Wessel J.K. Handbook of advanced materials enabling new designs

Справочник
  • формат pdf
  • размер 4.43 МБ
  • добавлен 07 марта 2011 г.
Wiley, Hoboken, 2004, 645 c. This handbook presents the most recently introduced advanced materials in an effort to inform you as soon as possible of materials that may improve your product or process. Each chapter describes material characteristics from which materials can be tentatively selected for further exploration. 1 Polymer Composites 2 Advanced Ceramic Materials 3 Continuous Fiber Ceramic Composites 4 Low-Temperature Co-Fired Ceramic Chi...