• формат pdf
  • размер 2.5 МБ
  • добавлен 30 октября 2010 г.
Ironmaking Process Alternatives Screening Study. Volume I: Summary Report
Lockwood Green Technologies, 2000 г. , 154 с.
This report was prepared as an account of work sponsored by an agency of the United States Govement. Neither the United States Govement nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Govement or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Govement or any agency thereof.
Смотрите также

Ferry M. Direct Stripcasting of Metals and Alloys: Processing, Microstructure and Properties

  • формат pdf
  • размер 68.06 МБ
  • добавлен 28 декабря 2011 г.
Woodhead Publishing and Maney Publishing, 2006, 275 pages Direct strip casting is a continuous casting process for producing metallic sheet directly from the molten state that minimises the need for substantial secondary processing. This important book is the first to review the implications of strip casting technology for a range of alloys, including carbon and stainless steel, aluminium, magnesium, titanium, copper and other non-ferrous allo...

Fritsching U. Spray Simulation: Modeling and Numerical Simulation of Sprayforming metals

  • формат pdf
  • размер 8.72 МБ
  • добавлен 20 января 2012 г.
Cambridge University Press, 2004, ISBN: 0521820987, 272 pages Spray forming combines the metallurgical processes of metal casting and powder metallurgy to fabricate metal products with enhanced properties. This book provides an instruction to the various modelling and simulation techniques employed in spray forming, and shows how they are applied in process analysis and development. The author begins by deriving and describing the main models....

Gupta C.K. Chemical Metallurgy

  • формат pdf
  • размер 6.09 МБ
  • добавлен 14 января 2012 г.
Wiley-VCH, 2003. 811 pp. This volume provides in one place a self-contained and adequately detailed coverage of the chemical metallurgy of the major metals, common as well as less common. It has been brought into being as an exceedingly well-structured treatise. The presentation has been organised in seven chapters. The first chapter gives a general appraisal of the whole field of chemical metallurgy. The coverage also includes a brief account of...

Lenard J.G. (Ed.) Metal Forming Science and Practice

  • формат pdf
  • размер 17.76 МБ
  • добавлен 30 декабря 2011 г.
Elsevier Science, 2002, Pages: 378 A State-of-the-Art Volume in Honour of Professor J.A. Schey's 80 th Birthday The topics included in this book include: John Schey and value-added manufacturing; Surface finish and friction in cold-metal rolling; Direct observation of interface for tribology in metal forming; An examination of the coefficient of friction; Studies on micro plasto hydrodynamic lubrication in metal forming; Numerical simulation o...

Morales E.V. (Ed.) Alloy Steel - Properties and Use

  • формат pdf
  • размер 30.63 МБ
  • добавлен 28 декабря 2011 г.
InTech, Rijeka, Croatia, 2011, 260 pages The sections in this book are devoted to new approaches and usages of stainless steels, the influence of the environments on the behavior of certain classes of steels, new structural concepts to understand some fatigue processes, new insight on strengthening mechanisms, and toughness in microalloyed steels. The kinetics during tempering in low-alloy steels is also discussed through a new set-up that uses...

Prasad K. Chemical and Metallurgical Thermodynamics

  • формат pdf
  • размер 3.39 МБ
  • добавлен 05 февраля 2012 г.
New Age International Pvt Ltd Publishers. 2006. 110p Based on the author's study of the subject as well as his long teaching experience, this title places emphasis on clarity of concepts, in addition to practical applications of thermodynamics in metallurgical process.

Sahai Y., Emi T. Tundish Technology For Clean Steel Production

  • формат pdf
  • размер 23.47 МБ
  • добавлен 30 декабря 2011 г.
World Scientific Publishing Company, 2008, 316 pages Continuous casting of steel has become a widely used process and an important step in steel production. The worldwide share of continuously cast steel has increased significantly in the last 25 years or so. However, concurrent with this increase in production levels are stringent quality requirements that have become crucial in the face of progressively increasing machine throughputs and lar...

Transformations in TRIP-assisted Steels: Microstructure and Properties

Дисертация
  • формат pdf
  • размер 11.23 МБ
  • добавлен 08 декабря 2010 г.
A thesis submitted for the degree of Doctor of Philosophy Sourabh Chatterjee Darwin College, University of Cambridge November, 2006 Abstract Despite the presence of high-carbon martensite, TRIP-assisted steels possess large uniform elongation. High-carbon martensite is normally brittle. In this thesis, it has been demonstrated that this apparent anomaly is due to the fine size of the martensite plates. The mechanical properties of these steels a...

Wright R.N. Wire Technology: Process Engineering and Metallurgy

  • формат pdf
  • размер 3.53 МБ
  • добавлен 30 октября 2011 г.
Butterworth-Heinemann, Elsevier, 2011, 320 pages Wire drawing is a metalworking process used to reduce the diameter of a wire by pulling the wire through a single, or series of, drawing die(s). The engineering applications of wire drawing are broad and far-reaching, including electrical wiring, cables, tension-loaded structural components, springs, paper clips and spokes for wheels. This all-new, classical text is the first to explain the co...

Yin R. Metallurgical Process Engineering

  • формат pdf
  • размер 13.09 МБ
  • добавлен 30 декабря 2011 г.
Metallurgical Industry Press, Beijing and Springer-Verlag Berlin, 2011, 328 pages "Metallurgical Process Engineering" discusses large-scale integrated theory on the level of manufacturing production processes, putting forward concepts for exploring non-equilibrium and irreversible complex system. It emphasizes the dynamic and orderly operation of the steel plant manufacturing process, the major elements of which are the flow, process network an...