Morales E.V. (Ed.) Alloy Steel - Properties and Use

формат pdf
размер 30.63 МБ
добавлен 28 декабря 2011 г.

InTech, Rijeka, Croatia, 2011, 260 pages

The sections in this book are devoted to new approaches and usages of stainless steels, the influence of the environments on the behavior of certain classes of steels, new structural concepts to understand some fatigue processes, new insight on strengthening mechanisms, and toughness in microalloyed steels. The kinetics during tempering in low-alloy steels is also discussed through a new set-up that uses a modified Avrami formalism.

Stainless Steels: New Approaches and Usages
Alloy Steel: Properties and Use First-Principles Quantum Mechanical Approach to Stainless Steel Alloys
Review – Metallic Bipolar Plates and Their Usage in Energy Conversion Systems

New Insight in Microalloyed and Low-Alloy Steels
Comments About the Strengthening Mechanisms in Commercial Microalloyed Steels and Reaction
Kinetics on Tempering in Low-Alloy Steels
Effect of Niobium on HAZ Toughness of HSLA Steels

Behaviour of Steels: Influence of the Enviroments
Environmentally Assisted Cracking Behavior of Low Alloy Steels in Simulated BWR Coolant Conditions
Influence of Dissolved Hydrogen on Stress Corrosion Cracking Susceptibility of Nickel Based Weld Alloy 182
SMAW Process in Terms of the Amount of Oxygen
Advanced Austenitic Heat-Resistant Steels for Ultra-Super-Critical (USC) Fossil Power Plants

Fatigue in Steels: From the Basic to New Concepts
Metal Fatigue and Basic Theoretical Models: A Review
A New Systemic Study Regarding the Behaviour of Some Alloy Steels During Low Cycles Fatigue Process

Смотрите также

?alak A., Seleck? M., Danninger H. Machinability of Powder Metallurgy Steels

формат pdf
размер 6.43 МБ
добавлен 03 января 2012 г.

Cambridge International Science Publishing, 2005, 536 pages The machinability of powder metallurgy steels is lower compared with wrought steels of appropriate composition and/or mechanical properties. This is due to a larger number of material and processing variables affecting the final properties of sintered materials. The aim of the book is to present knowledge for an overview of all interacting factors in machining, including those applied...

Beswick J.M. Bearing Steel Technology, ASTM STP 1419

формат pdf
размер 12.13 МБ
добавлен 15 января 2012 г.

ASTM International, 2002, 0803128940, 533 pages Astm Special Technical Publication Forty-two peer-reviewed papers provide the latest global information on bearing steel manufacture and service life endurance along with an up-to-date perspective on rolling bearing steel technologies. Papers cover: Bearing Steel Process Developments; Steel Technology and Bearing Component Manufacture; Developments in Bearing Steel quality Assessment and Cor...

Higgins R.A. Engineering Metallurgy: Applied Physical Metallurgy

формат pdf
размер 28.23 МБ
добавлен 04 января 2012 г.

6 Edition, Arnold, Hodder Headline Group, London, 1993, 582 pages An ideal introduction to physical metallurgy, this popular and well-established text offers far more specific information on alloys and steels that comparable general materials books. Placing emphasis very much on applied metallurgy, the author employs a simple, direct style, together with helpful diagrams, to relate theory to commercial alloys and real applications. Some Fundam...

Klar E., Samal P.K. Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties

формат pdf
размер 7.48 МБ
добавлен 20 января 2012 г.

ASM International, 2007, ISBN: 0871708485, 243 pages Progress in the understanding of corrosion and corrosion resistance properties of sintered stainless steels has lead to new applications that benefit from net shape processing and more efficient material utilization. The text, extensive graphics, and tabular summaries provide a comprehensive reference to obtain good corrosion resistance properties of sintered stainless steels with careful pro...

Mazanec K., Mazancova E. Physical Metallurgy of Thermomechanical Treatment of Structural Steels

формат pdf
размер 1.7 МБ
добавлен 15 января 2012 г.

Cambridge International Science Publishing, 1997, 143 Pages, ISBN: 1898326436 The main feature of TMT is that the plastic deformation of the initial austenitic matrix and the formation of its controlled structural and mechanical state with subsequent heat treatment, phase transformation, are linked. This link makes it possible to utilize the hardening or refining of the grains of the initial austenitic matrix and also utilize the structural mod...

Nisbett E.G. Steel Forgings: Design, Production, Selection, Testing and Application

формат pdf
размер 22.17 МБ
добавлен 30 декабря 2011 г.

ASTM International, 2005, 132 pages ASTM Stock No. MNl53 (Manual 53) Manual 53 is a comprehensive, in-depth publication that covers the full range and scope of steel forgings. Manual 53 is both a practical and vital resource for design engineers; purchasing managers; manufacturers of pressure vessels, turbines, and generators; metallurgical engineers; university professors, and lawyers. Introduction: Why Steel Forgings? Why Use Forgings? Effe...

Sha W., Guo Z. Maraging Steels: Modelling of Microstructure, Properties and Applications

формат pdf
размер 16.39 МБ
добавлен 24 декабря 2011 г.

Woodhead Publishing Limited, 2009, 203 pages Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels. Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Me...

Verhoeven J.D. Steel Metallurgy for the Non-Metallurgist

формат pdf
размер 5.96 МБ
добавлен 06 января 2012 г.

ASM International, 2007, 212 pages This book explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts_beginning at the level of high-school chemisty classes_and building to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. This book is THE practicle primer on steel metallurgy for those who heat, forge, or machine steel. Consider this the Cliff...

Weng Y., Dong H., Gan Y. (Eds.) Advanced Steels: The Recent Scenario in Steel Science and Technology

формат pdf
размер 37.91 МБ
добавлен 30 декабря 2011 г.

Metallurgical Industry Press, Beijing and Springer-Verlag GmbH Berlin, 2011, 511 pages This book contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. It covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for...

Whang S.H. (Ed.) Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications

формат pdf
размер 27.87 МБ
добавлен 28 декабря 2011 г.

Woodhead Publishing Limited, 2011, 803 pages Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical pro...