API RP 555-2001 Process Analyzers

American Petroleum Institute (API) Sixth Edition, August 2001. 58p. This standard is applicable to cleaning stationaru atmospheric and lov-pressure (up to and including 15 psig) aboveground petroleum storage tanks used in all sectors of the petroleum and petrochemical industry, including crude oil and gas production, refineries, petrochemical plants, bulk plants and terminals.

American Petroleum Instltute (API) First Edition, September 2006. 127p. This document recommends minimum requirements and guidelines for the design and installation of electrical systems on fixed and floating petroleum facilities located offshore when hazardous locations are classified as Zone 0, Zone 1, or Zone 2.

American Petroleum Institute (API) First Edition, March 2001. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs).

American Petroleum Institute (API) First Edition, March 2002. 99p. This Recommended Practice (RP) provides guidelines for design, fabrication, installation, inspection and operation of Floating Production Systems (FPSs). The basic function of a FPS is to receive hydrocarbons from the wellhead, process the hydrocarbons, and store and/or ofЯoad the product to a shuttle tanker or convey it to a pipeline system

American Petroleum Instltute (API) First Edition, May 1991. 68p. The procedures for installation of the instruments covered in this recommended practice are based on experience with and evaluation of many installations.

American Petroleum Instltute (API) Second Edition, September 2008. 654p. This publication provides quantitative procedures to establish an inspection program using risk-based methods for pressurized fixed equipment, including pressure vessel, piping, tankage, pressure relief devices, and heat exchanger tube bundles. This document is to be used in conjunction with API 580, which provides guidance on developing a riskbased inspection program for fi...

American Petroleum Instltute (API) First Edition, October 2001, Reaffirmed, March 2007. 36p. The purpose of this document is to recommend practices and procedures for promotion and maintenance of safe working conditions for personnel engaged in onshore oil and gas production, including special services.

American Petroleum Institute (API) Fifth Edition, June 2001. 30p. The following definitions are applicable to underground tank lining and inspection as described in this standard.

American Petroleum Instltute (API) Eighth Edition, May 1995. 34p. This standard covers the design, construction, and location of liqueЮed petroleum gas (LPG) installations at marine and pipeline terminals, natural gas processing plants, reЮneries, petrochemical plants, or tank farms.

This standard American Welding Society (AWS). 2010. 68p. This specification prescribes requirements for the classification of flux cored stainless steel electrodes for flux cored arc welding, flux cored stainless steel rods for root pass welding with the gas tungsten arc process, and metal cored stainless steel electrodes for gas metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding, and any other process to which...