Стандарт
  • формат pdf
  • размер 1.03 МБ
  • добавлен 08 декабря 2011 г.
API 570-2009 Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems
78 стр.
THIRD EDITION, NOVEMBER 2009
The intent of this code is to specify the in-service inspection and condition-monitoring program that is needed to determine the integrity of piping. That program should provide reasonably accurate and timely assessments to determine if any changes in the condition of piping could possibly compromise continued safe operation. It is also the intent of this code that owner-users shall respond to any inspection results that require corrective actions to assure the continued safe operation of piping.
API 570 was developed for the petroleum refining and chemical process industries but may be used, where practical, for any piping system. It is intended for use by organizations that maintain or have access to an authorized inspection agency, a repair organization, and technically qualified piping engineers, inspectors, and examiners, all as defined in Section 3.
Смотрите также

API (American Petroleum Institute) Standards - (ENGL)

Стандарт
  • формат pdf
  • размер 84.57 МБ
  • добавлен 09 января 2012 г.
API 551 (1993)_Process Measurement Instrumentation.pdf ( 4206 KB) API 552 (1994)_Transmission Systems.pdf (3162 KB) API 553 (1998)_Refinery Control Valves.pdf (413 KB) API 554 (1995)_Process Instrumentation and Control.pdf (5545 KB) API 555 (2001)_Process Analyzers.pdf (3633 KB) API 556 (1997)_Instrumentation and Control Systems.pdf (2423 KB) API 557 (2000)_Guide To Advanced Control Systems.pdf (2867 KB) API 560 (2001)_Fired Heaters f...

API 510-2006 Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration

Стандарт
  • формат pdf
  • размер 848.62 КБ
  • добавлен 13 декабря 2011 г.
70 стр. Downstream Segment American Petroleum Institute, Ninth Edition , June 2006 General Application Coverage This inspection code covers the in-service inspection, repair, alteration, and rerating activities for pressure vessels and the pressure- relieving devices protecting these vessels. This inspection code applies to all refining and chemical process vessels that have been placed in service unless specifically excluded per 1.2.2. This incl...

API 579-1/ASME FFS-1 Fitness-For-Service

Стандарт
  • формат pdf
  • размер 9.59 МБ
  • добавлен 10 декабря 2011 г.
1128 стр. American Petroleum Institute, The American Society of Mechanical Engineers, JUNE 5, 2007, Second Edition The methods and procedures in this Standard are intended to supplement and augment the requirements in API 510, API 570, API 653, and other post construction codes that reference FFS evaluations such as NB-23. The assessment procedures in this Standard can be used for Fitness-For-Service assessments and/or rerating of equipment desig...

API 579-2/ASME FFS-2 2009 Fitness-For-Service Example Problem Manual

Стандарт
  • формат pdf
  • размер 3.93 МБ
  • добавлен 10 декабря 2011 г.
374 стр. American Petroleum Institute, The American Society of Mechanical Engineers, AUGUST 11, 2009 Fitness-For-Service (FFS) assessments in API 579-1/ASME FFS-1 Fitness-For-Service are engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage or that may be operating under specific conditions that could produce a failure. API 579-1/ASME FFS-1 provides guidance...

API RP 572-2009 Inspection Practices for Pressure Vessels

Стандарт
  • формат pdf
  • размер 2.53 МБ
  • добавлен 08 декабря 2011 г.
63 стр. THIRD EDITION, NOVEMBER 2009 This recommended practice (RP) covers the inspection of pressure vessels. It includes a description of the various types of pressure vessels (including pressure vessels with a design pressure below 15 psig) and the standards for their construction and maintenance. This RP also includes reasons for inspection, causes of deterioration, frequency and methods of inspection, methods of repair, and preparation of re...

API RP 572-2009 Inspection Practices for Pressure Vessels (With Annex A, B,C)

Стандарт
  • формат pdf
  • размер 17.89 МБ
  • добавлен 09 декабря 2011 г.
150 стр. c Приложениями Annex A (informative) Exchangers Annex B (informative) Towers Annex C (informative) Sample Record Forms THIRD EDITION, NOVEMBER 2009 This recommended practice (RP) covers the inspection of pressure vessels. It includes a description of the various types of pressure vessels (including pressure vessels with a design pressure below 15 psig) and the standards for their construction and maintenance. This RP also includes reason...

API RР 577-2004 Welding Inspection and Metallurgy (Eng)

Стандарт
  • формат pdf
  • размер 5.86 МБ
  • добавлен 17 января 2012 г.
American Petroleum Institute (API). First Edition. October 2004. 114p. This recommended practice (RP) provides guidance to the API authorized inspector on welding inspection as encountered with fabrication and repair of refinery and chemical plant equipment and piping. Common welding processes, welding procedures, welder qualifications, metallurgical effects from welding, and inspection techniques are described to aid the inspector in fulfilling...

API Std 653-2010 Tank Inspection, Repair, Alteration, and Reconstruction

Стандарт
  • формат pdf
  • размер 586.1 КБ
  • добавлен 08 декабря 2011 г.
44 стр. FOURTH EDITION, APRIL 2009 ADDENDUM 1, AUGUST 2010 This standard covers steel storage tanks built to API 650 and its predecessor API 12C. It provides minimum requirements for maintaining the integrity of such tanks after they have been placed in service and addresses inspection, repair, alteration, relocation, and reconstruction. The scope is limited to the tank foundation, bottom, shell, structure, roof, attached appurtenances, and nozzl...

ASME Section XI 2010. ASME Boiler and Pressure Vessel Code. Rules for Inservice Inspection of Nuclear Power Plant Components

Стандарт
  • формат pdf
  • размер 13.81 МБ
  • добавлен 31 октября 2011 г.
ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE XI Rules for Inservice Inspection of Nuclear Power Plant Components Date of Issuance: July 1, 2010 (Includes all Addenda dated July 2009 and earlier) 543 стр.

BS EN 13480-5: 2002 Metallic industrial piping - Part 5: Inspection and testing(Eng)

Стандарт
  • формат pdf
  • размер 348.29 КБ
  • добавлен 31 декабря 2011 г.
This European Standard was approved by CEN on 23 May 2002. 36p. This Part of this European Standard specifies the requirements for inspection and testing of industrial piping as defined in EN 13480-1:2002 to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3 and prEN 13480-6 (if applicable), and fabricated and installed in accordance with EN 13480-4.