Статья. Опубликована в журнале "Inteational Joual of Machine
Tools and Manufacture". – 2004. – Vol. 44 – P. 1547-1553.
Статья на английском языке.
Название на русском языке: Изучение механохимического процесса
полирования с помощью магнитного поля внутренней поверхности Si3N4
керамических компонентов. Отделочные характеристики при обработке с
использованием дистиллированной воды.
Аннотация к статье на английском языке:
This study discusses the finishing characteristics of a magnetic field assisted mechanochemical polishing process using Cr2O3 abrasive mixed with magnetic particles in the case of wet finishing using distilled water, which was proposed for inteal finishing of Si3N4 fine ceramic tubes. It was clarified that a highly accurate finishing can be achieved more efficiently in the case of wet finishing using distilled water compared with dry finishing. Moreover, those conditions necessary to achieve high efficiency finishing are discussed.
This study discusses the finishing characteristics of a magnetic field assisted mechanochemical polishing process using Cr2O3 abrasive mixed with magnetic particles in the case of wet finishing using distilled water, which was proposed for inteal finishing of Si3N4 fine ceramic tubes. It was clarified that a highly accurate finishing can be achieved more efficiently in the case of wet finishing using distilled water compared with dry finishing. Moreover, those conditions necessary to achieve high efficiency finishing are discussed.