System Manual: Siemens SIMATIC HMI (WinCCv7.0: Scripting VBS, ANSI-C, VBA)
Подождите немного. Документ загружается.
OperationReport Property
Description
TRUE, if the reason for an operation should be recorded. BOOLEAN write/read
access.
When the object is used or operated in Runtime, a dialog opens in which the operator can
input the reason for the operation in the form of text. The operation is sent to the message
system, and is archived.
See also
Slider (Page 223)
Text list (Page 210)
I/O Field (Page 196)
ScreenItem Object (Page 134)
OperatorMessageNumber property
Message number - OperatorMessageNumber
Define a message number for the selected operator message event if you do not want to use
the operator message of WinCC.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageNumber.
OperatorMessageSelected property
Operator messages for - OperatorMessageSelected
Activate the message events which trigger operator messages in the list.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSelected.
OperatorMessageSource1 property
Source - OperatorMessageSource1
Define the message block of an operated message to be added to "Process value block 1" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of
"User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 1" of the operator message. Select "1" at process value as the message lock of
the operated message "User text block 1".
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
461
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource1.
OperatorMessageSource2 property
Source - OperatorMessageSource2
Define the message block of an operated message to be added to "Process value block 2" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of
"User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 2" of the operator message. Select "2" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource2.
OperatorMessageSource3 property
Source - OperatorMessageSource3
Define the message block of an operated message to be added to "Process value block 3" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of "User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 3" of the operator message. Select "3" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource3.
OperatorMessageSource4 property
Source - OperatorMessageSource4
Define the message block of an operated message to be added to "Process value block 4" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of "User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 4" of the operator message. Select "4" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource4.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
462
System Manual, 11/2008,
OperatorMessageSource5 property
Source - OperatorMessageSource5
Define the message block of an operated message to be added to "Process value block 5" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of
"User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 5" of the operator message. Select "5" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource5.
OperatorMessageSource6 property
Source - OperatorMessageSource6
Define the message block of an operated message to be added to "Process value block 6" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of "User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 6" of the operator message. Select "6" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource6.
OperatorMessageSource7 property
Source - OperatorMessageSource7
Define the message block of an operated message to be added to "Process value block 7" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of "User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 7" of the operator message. Select "7" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource7.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
463
OperatorMessageSource8 property
Source - OperatorMessageSource8
Define the message block of an operated message to be added to "Process value block 8" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of
"User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 8" of the operator message. Select "8" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource8.
OperatorMessageSource9 property
Source - OperatorMessageSource9
Define the message block of an operated message to be added to "Process value block 9" of
the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of "User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 9" of the operator message. Select "9" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource9.
OperatorMessageSource10 property
Source - OperatorMessageSource10
Define the message block of an operated message to be added to "Process value block 10"
of the operator message configured in Source.
An operator message is to be generated to indicate that a message was locked. The content
of "User text block 1" of the locked message, e.g. "Motor faulty", is to be displayed in "Process
value block 10" of the operator message. Select "10" at process value as the message lock of
the operated message "User text block 1".
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSource10.
OperatorMessageSourceType1 property
Transfer as - OperatorMessageSourceType1
Specifies the format of the source content for the transfer.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
464
System Manual, 11/2008,
The following formats are available:
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType1.
OperatorMessageSourceType2 property
Transfer as - OperatorMessageSourceType2
Specifies the format of the source content for the transfer.
The following formats are available:
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType2.
OperatorMessageSourceType3 property
Transfer as - OperatorMessageSourceType3
Specifies the format of the source content for the transfer.
The following formats are available:
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType3.
OperatorMessageSourceType4 property
Transfer as - OperatorMessageSourceType4
Specifies the format of the source content for the transfer.
The following formats are available:
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
465
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType4.
OperatorMessageSourceType5 property
Transfer as - OperatorMessageSourceType5
Specifies the format of the source content for the transfer.
The following formats are available:
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType5.
OperatorMessageSourceType6 property
Transfer as - OperatorMessageSourceType6
Specifies the format of the source content for the transfer.
The following formats are available:
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType6.
OperatorMessageSourceType7 property
Transfer as - OperatorMessageSourceType7
Specifies the format of the source content for the transfer.
The following formats are available:
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
466
System Manual, 11/2008,
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType7.
OperatorMessageSourceType8 property
Transfer as - OperatorMessageSourceType8
Specifies the format of the source content for the transfer.
The following formats are available:
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType8.
OperatorMessageSourceType9 property
Transfer as - OperatorMessageSourceType9
Defines the format for transferring the source.
The following formats are available:
Value Description Description
0 Text Transfer the source as text.
1 Value Transfer the source as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType9.
OperatorMessageSourceType10 property
Transfer as - OperatorMessageSourceType10
Specifies the format of the source content for the transfer.
The following formats are available:
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
467
Value Description Description
0 Text Transfer the source content in text format.
1 Value Transfer the source content as value.
The attribute can be assigned dynamic properties by means of the name
OperatorMessageSourceType10.
Or - Ou
Orientation Property
Description
TRUE, when the text in the object should be displayed horizontally. BOOLEAN write-read
access.
Description of the "Connector" object type
Modifies the orientation of the connector. BOOLEAN write-read access.
See also
Connector (Page 180)
Static text (Page 178)
Text list (Page 210)
Radio box (Page 219)
Check box (Page 217)
Button (Page 214)
I/O Field (Page 196)
ScreenItem Object (Page 134)
OuterBevelStyle Property
Description
Defines the 3D effect for the outer bevel of the object.
● 0: No border.
● 1: The border is displayed depressed.
● 2: The border is displayed raised.
● 3: The border is displayed in one color without a 3D effect. The border color is defined by
the "BevelColorUp" property.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
468
System Manual, 11/2008,
See also
WinCC Slider Control (Page 259)
ScreenItem Object (Page 134)
OuterBevelWidth Property
Description
Defines the width of the outer bevel in pixels.
See also
WinCC Slider Control (Page 259)
ScreenItem Object (Page 134)
Outline Property
Description
TRUE, when the button should be given a black border in addition to the 3D border. BOOLEAN
write-read access.
See also
WinCC Push Button Control (Page 253)
ScreenItem Object (Page 134)
OutputFormat Property
Description
Returns the value for the representation of the output value and sets it. The representation
depends on the data format.
See also
I/O Field (Page 196)
ScreenItem Object (Page 134)
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
System Manual, 11/2008,
469
OutputValue Property
Description
Determines the default setting for the value to be displayed or returns it.
This value is used in Runtime when the associated tag cannot be connected or updated when
a picture is started.
See also
Text list (Page 210)
I/O Field (Page 196)
ScreenItem Object (Page 134)
1.14.4.15 P
Pa - Pe
PageMode property
Enable paging - PageMode
Enables paging is in the long-term archive list. Allows you to display all messages of the short-
term
archive in the long-term archive list. Use the "Messages per page" property to determine
the number of messages output per page.
The page up/down buttons of the toolbar can be used if paging is enabled.
Value Description
TRUE Paging is enabled for the long-term archive list.
FALSE Paging is disabled for the long-term archive list.
The attribute can be assigned dynamic properties by means of the name PageMode.
PageModeMessageNumber property
Messages per page - PageModeMessageNumber
Defines the number of messages shown per page when paging the long-term archive list.
The attribute can be assigned dynamic properties by means of the name
PageModeMessageNumber.
VBS for Creating Procedures and Actions
1.14 VBS Reference
MDM - WinCC: Scripting (VBS, ANSI-C, VBA)
470
System Manual, 11/2008,