Rowell R.M. (ed.) Handbook of Wood Chemistry and Wood Composites
Подождите немного. Документ загружается.
Chapman, B.N. (1980). Glow Discharge Processes: Sputtering and Plasma Etching. John Wiley & Sons, New
York.
Chen, F.F. (1965.). Electric probes. In: Huddlestone R.H. and Leonard S.L. (Eds.), Plasma Diagnostic
Techniques. Academic Press, New York.
Chen, H.Y. and Zavarin, E. (1990). Interactions of cold radiofrequency plasma with solid wood, I: Nitrogen
permeability along the grain. J. Wood Chem. Technol. 10(3):387–400.
Chen, X. and Pfender E. (1983). Behavior of small particles in a thermal plasma flow. Plasma Chem. Plasma
Proc. 3(3):351–366.
Cho, D. L. and Sjöblom, E. (1990a). Plasma treatment of wood. Polym. Mater. Sci. Eng. 62:48–49.
Cho, D.L. and Sjöblom, E. (1990b). Plasma treatment of wood. J. Appl. Polym. Sci.: Applied Polymer
Symposium. 46:461–472.
Christiansen, A.W. (1990). How overdrying wood reduces its bonding to phenol-formaldehyde adhesives: A
critical review of the literature, Part I: Physical responses. Wood Fiber Sci. 22(4):441–459.
Christiansen, A.W. (1991). How overdrying wood reduces its bonding to phenol-formaldehyde adhesives: A
critical review of the literature, Part II: Chemical reactions. Wood Fiber Sci. 23(1):69–84.
Danikas, M.G. (1993). The definitions used for partial discharge phenomena. IEEE Trans. Elec. Insul.
28(6):1075–1081.
Denes, A.R. and Young, R.A. (1999). Reduction of weathering degradation of wood through plasma-polymer
coating. Holzforschung 53(6):632–640.
Denes, A.R., Tshabalala, M.A., Rowell, R.M., Denes, F.S., and Young, R.A. (1999). Hexamethyldisiloxane-
plasma coating of wood surfaces for creating water repellent characteristics. Holzforschung
53(3):318–326.
Eliasson, B., Egli, W., and Kogelschatz, U. (1994). Modeling of dielectric barrier discharge chemistry. Pure
Appl. Chem. 66(6):1279–1286.
Eliasson, B., Hirth, M., and Kogelschatz, U. (1987). Ozone synthesis from oxygen in dielectric barrier
discharges. J. Phys. D: Appl. Phys. 20(11):1421–1437.
Eruzin, A.A., Gavrilenko, I.B, and Udalov, Y.P. (1999). Surface polymerization of acetylene in plasma of a
D.C. glow discharge on wood. Fizika I Khimiya Obrabotki Materialov 6:36–41.
Esteves Magalhães, W.L. and Ferreira de Souza, M. (2000). Solid softwood coated with plasma-polymer for
water repellence. Proceedings from the 3
rd
International Symposium on Natural Polymers and Com-
posites. (Meeting date 2000), 260–264.
Esteves Magalhães, W.L. and Ferreira de Souza, M. (2002). Solid wood coated with plasma-polymer for water
repellence. Surf. Coat. Technol. 155:11–15.
Gavrilenko, I.B., Eruzin, A.A., Tsoi, Y., Lukin, V.G., Onegin, V.I., and Udalov, Y.P. (2002). Method for working
of wood for musical instruments. Russian Patent, RU 2185283.
Gentile, A.C. and Kushner, M.J. (1996). Microstreamer dynamics during plasma remediation of NO using
atmospheric pressure dielectric barrier discharges. J. Appl. Phys. 79(8):3877–3885.
Gericke, K.-H., Gessner, C., Scheffler, P. (2002). Microstructure electrodes as a means of creating uniform
discharges at atmospheric pressure. Vacuum 65(3-4):291–297.
Goldman, M., Goldman, A., and Sigmond, R.S. (1985). The corona discharge, its properties and specific uses.
Pure App. Chem. 57(9):1353–1362.
Goring, D.A.I. (1976). Plasma-induced adhesion in cellulose and synthetic polymers. Transactions of the
Symposium on The Fundamental Properties of Paper Related to its Uses. (Meeting date 1973),
172–189.
Grill, A. (1994). Cold Plasma in Materials Fabrication—From Fundamentals to Applications. IEEE Press,
New York.
Guanben, D., Yukun, H., and Zheng, W. (2001). Wood surface treatment with microwave plasma. Proceedings
from the 7
th
International Symposium on Wood Adhesives. (Meeting date 2000), 361–366.
Harada, T., Hirata, T., Setoyama, K., Ohkoshi, M. (1994). Utilization of wood and its feasibility as ecomaterials.
Trans. Mater. Res. Soc. Jpn. 18A(Ecomaterials):677–680.
Hatano, Y. and Hirabayashi, Y. (2001). Wettability on the wood surface treated with plasma and adhesive
strength. Koen Yoshisu-Nippon Setchaku Gakkai Nenji Taikai 39:5–6.
Herman, H. (1988). Plasma-sprayed coatings. Sci. Am. 259(3):112–117.
Hershkowitz, N. (1989). How Langmuir probes work. In: Auciello O. and Flamm D.L. (Eds.), Plasma
Diagnostics. Vol. 1. Academic Press, New York.
© 2005 by CRC Press
Hitchon, W.N.G. (1999). Plasma Processes for Semiconductor Fabrication. Cambridge University Press,
Cambridge.
Hollahan, J.R. and Bell, A.T. (Eds.). (1974). Techniques and Applications of Plasma Chemistry. John Wiley
& Sons, Inc., New York.
Ishikawa, H., Usui, H., Adachi. A., Konishi, S., Oonishi, K., and Pponda, K. (1994). Improved process for
formalination of wood. Jpn. Kokai Tokkyo Koho, JP 06099409.
Katakami, E., Uehara, T., and Katayama, H. (2001). Plasma polymerization of ethylene on wood at atmospheric
pressure. Nippon Setchaku Gakkaishi 37(10):380–384.
Kawamura, J. and Kotani, K. (1992). Improvement treatments of bamboo culm surfaces. Mokuzai Gakkaishi
38(4):417–423.
Kikuchi, M., Kataoka, A., Akita, K., and Kaneiwa, H. (2002). Weather-resistant lignocellulose, manufacture
thereof, and composites therefrom for interiors/exteriors. Jpn. Kokai Tokkyo Koho, JP 20022283306.
Kogelschatz, U., Eliasson, B., and Egli, W. (1997). Dielectric-barrier discharges: Principle and applications.
XXIII International Conference on Phenomena in Ionized Gases. J. Phys. IV. 7(C4):C4/47–C4/66.
Kondo, Y. (2002). Method for surface treatment. Jpn. Kokai Tokkyo Koho, JP 2002035574.
Kreuger, F.H., Gulski, E., and Krivda, A. (1993). Classification of partial discharges. IEEE Trans. Elec. Insul.
28(6):917–931.
Legeay, G., Epaillard, F., and Brosse, J.C. Surface modification of natural or synthetic polymers by cold
plasmas. Proceedings from the 2
nd
Annual Int. Conf. Plasma Chem. Technol. (Meeting date 1984),
29–39.
Leveroni, E. and Pfender, E. (1990). A unified approach to plasma-particle heat transfer under non-continuum
and non-equilibrium conditions. Int. J. Heat Transfer, 33(7):1497–1509.
Lukowsky, D. and Hora, G. (2002). Pretreatments of Wood to enhance performance of outdoor coatings.
Macromolecular Symposia. 187:77–85.
MacRae, D.R. (1989). Plasma arc process systems, reactors, and applications. Plasma Chem. Plasma Proc.
9(1, Suppl.):85S–118S.
Mahlberg, R., Niemi, H.E.-M., Denes, F.S., and Rowell, R.M. (1999). Application of AFM on the adhesion
studies of oxygen-plasma-treated polypropylene and lignocellulosics. Langmuir 15(8):2985–2992.
Mahlberg, R., Niemi, H.E.-M., Denes, F.S., and Rowell, R.M. (1998). Effect of oxygen and hexamethyldisi-
loxane plasma on morphology, wettability and adhesion properties of polypropylene and lignocellu-
losics. Int. J. Adhesion Adhesives 18:283–297.
Matsui, H., Setoyama, K., and Kurosu, H. (1992). Surface modification of wood in fluorine-containing gas
plasma, I: Tetrafluoromethane plasma treatment. Mokuzai Gakkaishi 38(1):73–80.
Nasser, E. (1971). Fundamentals of Gaseous Ionization and Plasma Electronics. Wiley-Interscience, New York.
Origasa, T. (1998). Treatment of wooden substrates containing formaldehyde-based resins. Jpn. Kokai Tokkyo
Koho, JP 1026410.
Podgorski, L., Bousta, G., Schambourg, F., Maguin, J., and Chevet, B. (2001). Surface modification of wood
by plasma polymerization. Pigment Resin Technol. 31(1):33–40.
Podgorski, L., Chevet, B., Onic, L., and Merlin, A. (2000). Modification of wood wettability by plasma and
corona treatments. Int. J. Adhesion Adhesives 20:103–111.
Podgorski, L. and Roux, M. (2000). Wood modification to improve the durability of coatings. Färg och Lack
Scandinavia 46(1):4–12.
Podgorski, L. and Roux, M. (1999). Wood modification to improve the durability of coatings. Surf. Coat. Int.
82(12):590–596.
Raizer, Y.P. (1991). Gas Discharge Physics. Springer-Verlag, Berlin.
Rehn, P. and Viöl, W. (2003). Dielectric barrier discharge treatments at atmospheric pressure for wood surface
modification. Holz als Roh- und Werkstoff 61(2):145–150.
Rehn, P., Wolkenhauer, A., Bente, M., Förster, S., and Viöl, W. (2003). Wood surface modification in dielectric
barrier discharges at atmospheric pressure. Surf. Coat. Technol. 174–175:515–518.
Scheffler, P., Bräuning-Demian, A., Gericke, K.-H., Gessner, C., Penache, C., Schmidt-Böcking, H., and
Spielberger, L. (2004). Micro-structured electrode 2D-arrays as a new device for direct current glow
discharges. Available at www.pci.tu-bs.de/aggericke/Forschung/MSE2D_basic.htm.
Setoyama, K. (1996). Surface modification of wood by plasma treatment and plasma polymerization.
J. Photopolymer Sci. Technol. 9(2):243–250.
Smith, R.W., Wei, D., and Apelian, D. (1989). Thermal plasma materials processing-applications and oppor-
tunities. Plasma Chem. Plasma Proc. 9(1, Suppl.):135S–165S.
© 2005 by CRC Press
Sokolov, O.M., Komarov, V.I., Kazakov, Y.V., and Visil’ev, M.N. (2001). Use of alkali-soluble extracts of
plasma-modified wood for strengthening of paper. Tsellyuloza, Bumaga, Karton 9–10:38–31.
Sokolov, O.M., Vasilijev, M.N., and Chukhchin, D.G. (1999). Investigation of changes in wood composition
during low-enthalpy treatment by electron-beam-induced plasma. Izvestiya Vysshikh Uchebnykh
Zavedenii, Lesnoi Zhurnal 2–3:167–175.
Sugawara, A., Sawata, Y., Onishi, K., and Okudaira, Y. (1998). Manufacturing of modified lignocellulosic
board with good water and moisture resistance. Jpn. Kokai Tokkyo Koho, JP 10305410.
Togawa, S. (1994). Method and apparatus for manufacture of solid building materials and the materials. Jpn.
Kokai Tokkyo Koho, JP 06100349.
Uehara, T. (2002). Surface treatment of timber by atmospheric plasma polymerization. Setchaku 46(2):60–64.
Van Brunt, R.J. (1994). Physics and chemistry of partial discharge and corona—Recent advances and future
challenges. IEEE Trans. on Dielectrics and Electrical Insulators 1(5):761–784.
Venugopalan, M. (1971). Reactions Under Plasma Conditions. Vol. 1. Wiley-Interscience, New York.
Vossen, J.L. and Kern, W. (Eds.). (1978). Thin Film Processes. Academic Press, New York.
Wistara, N., Denes, F.S., and Young, R.A. (2002). The resistance of CF
4
plasma treated tropical woods against
white-rot (Trametes versicolor L. Fr. Pilat) attack. Proceedings of the International Wood Science
Symposium. (Meeting date 2002), pp. 157–163.
Yang, P., Jinno, K., Nishimoto, A., Ohsako, Y., Yamauchi, H., and Sasaki, H. (1999). Reinforcement of
cylindrical LVL, I: Improving the bondability of waste paper-polyethylene composite core fillers to
the cylindrical LVL. Mokuzai Kogyo 54(9):416–419.
© 2005 by CRC Press