Статья. Опубликована в журнале "Inteational Joual of
Engineering Science and Technology". – 2011. – Vol. 3, No. 7 – P.
5747-5753.
Статья на английском языке.
Название на русском языке: Внутренняя финишная обработка
цилиндрических труб с использованием спеченных магнитных абразивов.
Аннотация к статье на английском языке:
An inteal magnetic abrasive finishing (MAF) process was proposed to produce highly finished inner surfaces of workpieces used in critical applications. The process principle and the finishing characteristics of magnetic abrasive finishing of cylindrical pipes using sintered magnetic abrasives are described in this research work. The sintered magnetic abrasive is a mixture of Al2O3 abrasive and ferromagnetic particles. The Al2O3 based sintered magnetic abrasives have been developed in sintering machine. The surface roughness measurements resulting from finishing experiments demonstrate the effects of the abrasive behavior on the surface modifications. The surface finish was analysed in terms of percent improvement in surface finish (PISF). Also surface finish was analysed using Response Surface Methodology (RSM). The obtained maximum PISF was 95% and minimum surface roughness was 0.05 μm Ra. To further study the improvement in surface finish, the surface was microscopically examined using X-Ray Diffraction (XRD).
An inteal magnetic abrasive finishing (MAF) process was proposed to produce highly finished inner surfaces of workpieces used in critical applications. The process principle and the finishing characteristics of magnetic abrasive finishing of cylindrical pipes using sintered magnetic abrasives are described in this research work. The sintered magnetic abrasive is a mixture of Al2O3 abrasive and ferromagnetic particles. The Al2O3 based sintered magnetic abrasives have been developed in sintering machine. The surface roughness measurements resulting from finishing experiments demonstrate the effects of the abrasive behavior on the surface modifications. The surface finish was analysed in terms of percent improvement in surface finish (PISF). Also surface finish was analysed using Response Surface Methodology (RSM). The obtained maximum PISF was 95% and minimum surface roughness was 0.05 μm Ra. To further study the improvement in surface finish, the surface was microscopically examined using X-Ray Diffraction (XRD).