Keating E.L. Applied combustion

формат pdf
размер 64.04 МБ
добавлен 22 января 2011 г.

2nd ed. CRC Press, Taylor & Francis Group, 2007. 649 р. ISBN?13: 978?1?57444?640?1; ISBN?10: 1?57444?640?1

Introduction to Applied Combustion
Combustion and Energy
Combustion and Entropy
Fluid Mechanics
Chemical Kinetics
Solid Fuels
Liquid Fuels
Gaseous Fuels
Combustion Engine Testing
Spark-Ignition Engine Combustion
Compression-Ignition Engine Combustion
Gas Turbine Engine Combustion
Thermal Destruction
Appendixes
A. Dimensions and Units
A.1 Some Systems of Primary Dimensions with Corresponding Units
A.2 Length Conversion Factors
A.3 Area Conversion Factors
A.4 Volume Conversion Factors
A.5 Time Conversion Factors
A.6 Velocity Conversion Factors
A.7 Volume Flow Rate Conversion Factors
A.8 Mass Conversion Factors
A.9 Density Conversion Factors
A.10 Mass Flow Rate Conversion Factors
A.11 Pressure Conversion Factors
A.12 Energy Conversion Factors
A.13 Specific Energy (Mass) Conversion Factors
A.14 Specific Energy (Volume) Conversion Factors
A.15 Specific Energy (Mass Flux) Conversion Factors
A.16 Specific Heat and Entropy Conversion Factors
A.17 Power Conversion Factors
A.18 Engineers-SI Conversion Factors
A.19 SI Prefixes
B. Some Thermochemical Properties
B.1 Standard State Heats of Formation and Combustion
(Higher Heating Value) for Various Compounds
B.2 Thermochemical Properties of Carbon
B.3 Thermochemical Properties of Methane
B.4 Thermochemical Properties of Carbon Monoxide
B.5 Thermochemical Properties of Carbon Dioxide
B.6 Thermochemical Properties of Acetylene
B.7 Thermochemical Properties of Ethylene
B.8 Thermochemical Properties of n-Octane
B.9 Thermochemical Properties of n-Dodecane
B.10 Thermochemical Properties of Methanol
B.11 Thermochemical Properties of Ethanol
B.12 Thermochemical Properties of Monatomic Hydrogen
B.13 Thermochemical Properties of Hydrogen
B.14 Thermochemical Properties of Water Vapor
B.15 Thermochemical Properties of Nitrogen
B.16 Thermochemical Properties of Nitric Oxide
B.17 Thermochemical Properties of Nitrogen Dioxide
B.18 Thermochemical Properties of Nitrogen
B.19 Thermochemical Properties of Dinitrogen Monoxide
B.20 Thermochemical Properties of Monatomic Oxygen
B.21 Thermochemical Properties of Hydroxyl
B.22 Thermochemical Properties of Diatomic Oxygen
B.23 Thermochemical Properties of Sulfur
B.24 Thermochemical Properties of Sulfur Dioxide
B.25 Thermochemical Properties of Air
C. Properties of Fuel Oil
D. Properties of Saturated Water
Bibliography

Похожие разделы

Смотрите также

Buckmaster J.D. (ed.) The Mathematics of Combustion

формат pdf
размер 13.38 МБ
добавлен 05 декабря 2010 г.

Society for Industrial and Applied Mathematics, Siam, Philadelphia, 1985. 254 р. ISBN:0-89871-053-7 Contents Contributors Foreword (H. T. Banks) Preface (John D. Buckmaster) Chapter I. An Introduction to Combustion Theory (John D. Buckmaster) Chapter II. Sensitivity Analysis of Combustion Systems (Herschel Rabitz) Chapter III. Turbulent Combustion (F. A. Williams) Chapter IV. Detonation in Miniature (Wildon Pickett) Chapter IV. Detonati...

Compton R.G. (Ed.) Low-temperature Combustion and Autoignition (Comprehensive Chemical Kinetics)

формат pdf
размер 34.89 МБ
добавлен 13 июля 2011 г.

Elsevier Science, 1997. 818 p. ISBN:0444824855 Combustion has played a central role in the development of our civilization which it maintains today as its predominant source of energy. The aim of this book is to provide an understanding of both fundamental and applied aspects of low-temperature combustion chemistry and autoignition. The topic is rooted in classical observational science and has grown, through an increasing understanding of the...

Liberman M.A. Introduction to Physics and Chemistry of Combustion: Explosion, Flame, Detonation

формат pdf
размер 14.75 МБ
добавлен 02 ноября 2011 г.

Springer, 2008. 349 p. ISBN:3540787585. Most of the material covered in this book deals with the fundamentals of chemistry and physics of key processes and fundamental mechanisms for various combustion and combustion related phenomena in gaseous combustible mixture. It provides the reader with basic knowledge of burning processes and mechanisms of reaction wave propagation. The combustion of a gas mixture (flame, explosion, detonation) is neces...

McAllister S., Chen J-Y., Fernandez-Pello A.C. Fundamentals of Combustion Processes (Mechanical Engineering Series)

формат pdf
размер 2.7 МБ
добавлен 21 мая 2011 г.

Springer, 2011. 325 p. ISBN:1441979425 Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes expl...

Merker G.P., Schwarz C., Stiesch G., Otto F. Simulating Combustion. Simulation of combustion and pollutant formation for engine-development

формат pdf
размер 7.39 МБ
добавлен 15 декабря 2010 г.

Springer-Verlag, Berlin, Heidelberg, 2006. 401 р. Introduction. Introduction into the functioning of internal combustion engines. Foundations of reaction kinetics. Engine combustion. Phenomenological combustion models. Pollutant formation. Calculation of the real working process. Total process analysis. Fluid mechanical simulation. Literature. Index.

Merker G.P., Schwarz C., Stiesch G., Otto F. Simulating Combustion. Simulation of combustion and pollutant formation for engine-development

формат djvu
размер 4.03 МБ
добавлен 11 сентября 2011 г.

Springer-Verlag, Berlin, Heidelberg, 2006. 423 р. ISBN-10:3540251618. Introduction. Introduction into the functioning of internal combustion engines. Foundations of reaction kinetics. Engine combustion. Phenomenological combustion models. Pollutant formation. Calculation of the real working process. Total process analysis. Fluid mechanical simulation. Literature. Index.

Poinsot T., Veynante D. Theoretical and Numerical Combustion

формат pdf
размер 11.49 МБ
добавлен 02 ноября 2011 г.

Second Edition. Erdwards, 2005. 540 p. ISBN:1930217102. Presents basic techniques and recent progress in numerical combustion while establishing important connections with the underlying combustion basics. Fully updated to reflect the latest advances in combustion research. Mirrors evolution of unsteady simulation methods such as LES codes for partially premixed flames and complex geometry burners. Includes extended descriptions of wave equatio...

Willard W. Pulkrabek. Engineering Fundamentals of the Internal Combustion Engine

формат pdf
размер 6.65 МБ
добавлен 13 августа 2010 г.

Prentice Hall, 2004. 504 p. This applied thermoscience book explores the basic principles and applications of various types of internal combustion engines, with a major emphasis on reciprocating engines. It covers both spark ignition and compression ignition engines—as well as those operating on four-stroke cycles and on two stroke cycles—ranging in size from small model airplane engines to the larger stationary engines. For use as a reference gu...

Zhao F., Lai M.-C., Harrington D.L. (Eds.) Automotive Spark-Ignited Direct-Injection Gasoline Engines

формат pdf
размер 7.45 МБ
добавлен 15 августа 2010 г.

Pergamon, Prog. Energy Comb. Sci., (An International Review Journal), 1999. vol .25. pp. 437-562 ISBN:0-08 043676-5 Introduction Overview Key potential benefits: GDI engine versus PFI engine Direct-injection gasoline fuel system Fuel system requirements Fuel injector considerations Fuel spray characteristics Atomization requirements Single-fluid high-pressure swirl injector Effect of injector sac volume Air-assisted injection Best pra...

Zhao F., Lai M.-C., Harrington D.L. (Eds.) Automotive Spark-Ignited Direct-Injection Gasoline Engines

формат djvu
размер 10.7 МБ
добавлен 11 сентября 2011 г.

Elsevier Science, Pergamon, 1999, 129 p. ISBN:0-08 043676-5 Introduction Overview Key potential benefits: GDI engine versus PFI engine Direct-injection gasoline fuel system Fuel system requirements Fuel injector considerations Fuel spray characteristics Atomization requirements Single-fluid high-pressure swirl injector Effect of injector sac volume Air-assisted injection Best practice performance of current GDI injectors Future requ...