This Standard was approved by CEN on 18 July 2007. 36p. This
Inteational Standard provides quality levels of imperfections in
fusion-welded joints (except for beam welding) in all types of
steel, nickel, titanium and their alloys. It applies to material
thickness above 0,5 mm. It covers fully penetrated butt welds and
all fillet welds. The priciples of this Inteational Standard may
also be applied to partial-penetration butt welds.
BS EN ISO 5817: 2007 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817: 2003, corrected version: 2005, including Technical CCorrigendum 1: 2006) (Eng)
Стандарт
- формат pdf
- размер 756.41 КБ
- добавлен 19 декабря 2011 г.
Смотрите также
Blondeau R. (Ed.) Metallurgy and Mechanics of Welding
- формат pdf
- размер 7.81 МБ
- добавлен 05 января 2012 г.
Wiley-ISTE Ltd, 2008, 496 pages This book offers a comprehensive overview on the subject of welding. The first part of the book provides a review of the various different welding processes in use, including both traditional and more recent high energy input welding techniques. It then goes on the deal with the entire set of thermal, metallurgical and mechanical phenomena in the heat affected zone (HAX) of bases metals and molten metals. Particu...
BS EN 1011-4: 2000+A1: 2003 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys (Eng)
Стандарт- формат pdf
- размер 389.43 КБ
- добавлен 18 декабря 2011 г.
This European Standard was approved by CEN on 14 August 2000, and amendment A1 was approved by CEN on 20 November 2003. 26p. This European Standard gives general recommendations for the manual, mechanized and automatic fusion welding of wrought and cast aluminium alloys and combinations thereof.
BS EN 1011-5: 2003 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel (Eng)
Стандарт- формат pdf
- размер 163.22 КБ
- добавлен 18 декабря 2011 г.
This European Standard was approved by CEN on 28 February 2003. 14p. This European Standard gives general recommendations for welding of clad steels by means of appropriate arc welding processes and electroslag strip cladding. It is generally applicable to all clad steels and is appropriate regardless of the type of fabrication involved, although the application standard may have additional requirements. Non-ferrous claddings, such as titanium, t...
BS EN 14532-1: 2004 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys (Eng)
Стандарт- формат pdf
- размер 599.96 КБ
- добавлен 25 января 2012 г.
This European Standard was approved by CEN on 14 October 2004. 44p. This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of welding consumables for steel, nickel and nickel alloys intended for all fields of application.
BS EN 14532-2: 2004 Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys (Eng)
Стандарт- формат pdf
- размер 450.05 КБ
- добавлен 25 января 2012 г.
This European Standard was approved by CEN on 14 October 2004. 26p. This document applies to welding consumables for which supplementary qualification is required. It contains the technical requirements to be fulfilled.
John C. Lippold, Samuel D. Kiser, John N. DuPont. Welding Metallurgy and Weldability of Nickel-Base Alloys (на английский язык)
- формат pdf
- размер 6.97 МБ
- добавлен 18 февраля 2011 г.
Published by John Wiley & Sons, Inc. , Hoboken, New Jersey, 2009, 440 pages Английский язык Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures ar...
Lancaster J.F. Metallurgy of welding
- формат pdf
- размер 17.59 МБ
- добавлен 06 июня 2011 г.
Published by Abington Publishing Woodhead Publishing Limited, Abington Hall, Abington, Cambridge CB1 6AH, England. 468 p. First published 1965, George Allen & Unwin Sixth edition published 1999, Abington Publishing. ISBN 1855734281 Metallurgical Effects of the Weld Thermal Cycle Gas-metal Equilibria Gas-metal Reactions in Arc Welding The Mechanism of Gas Absorption in Welding Porosity Diffusion Dilution and Unifor...
Olsen F.O. (Ed.) Hybrid Laser Arc Welding
- формат pdf
- размер 6.85 МБ
- добавлен 28 декабря 2011 г.
Woodhead Publishing Limited and CRC Press, 2009, 323 pages Hybrid laser-arc welding (HLAW) is a combination of laser welding with arc welding that overcomes many of the shortfalls of both processes. This important book gives a comprehensive account of hybrid laser-arc welding technology and applications. The first part of the book reviews the characteristics of the process, including the properties of joints produced by hybrid laser-arc weldin...
Sun X. (Ed.) Failure Mechanisms of Advanced Welding Processes
- формат pdf
- размер 6.52 МБ
- добавлен 28 декабря 2011 г.
Woodhead Publishing Ltd + CRC Press, 2010, 318 pages Many new, or relatively new, welding processes such as friction stir welding, resistance spot welding and laser welding are being increasingly adopted to replace or improve on traditional welding techniques. Before advanced welding techniques are employed, their potential failure mechanisms should be well understood and their suitability for welding particular metals and alloys in different s...