BS EN 10246-1: 1996 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness

  1. Файлы
  2. Стандарты
  3. Стандарты Британии (BS)
  4. BS EN
Стандарты Британии (BS)
Стандарт
  • формат pdf
  • размер 707.35 КБ
  • добавлен 05 декабря 2011 г.
BS EN 10246-1: 1996 Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
18 стр.
The European Standard EN 10246-10:2000 has the status of a British Standard
July 1996
This Part of EN 10246 specifies the requirements for automatic electromagnetic testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc-welded (SAW) tubes, for verification of hydraulic leak-tightness. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm.
For automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes (excluding SAW tubes), for verification of hydraulic leak-tightness, EN 10246-2 applies. European Standard EN 10246 Non-destructive testing of steel tubes comprises the Parts shown in Annex A.
Похожие разделы
  1. Стандарты
  2. Европейские стандарты (EN)
  1. Стандарты
  2. Стандарты Беларуси
  3. СТБ EN
  1. Стандарты
  2. Стандарты Германии (DIN)
  3. DIN EN
  1. Стандарты
  2. Стандарты Украины (ДБН, ДСТУ)
  3. ДСТУ EN
Смотрите также

BS EN 10246-12: 2000 Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

Стандарт
  • формат pdf
  • размер 141.19 КБ
  • добавлен 05 декабря 2011 г.
14 cтр. The European Standard EN 10246-12:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements and the acceptance levels for magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections. This part of EN 10246 is to be used for the detection of surface imperfections on the entire or any part of the outer surface of tubes, excluding the e...

BS EN 10246-13: 2000 Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes

Стандарт
  • формат pdf
  • размер 360.88 КБ
  • добавлен 05 декабря 2011 г.
10 cтр. The European Standard EN 10246-13:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements for the full peripheral ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc welded (SAW) tubes, for wall thickness measurement. The standard specifies acceptance levels and calibration procedures. NOTE 1: Full peripheral testing does not necessarily mean that 100...

BS EN 10246-14: 2000 Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections

Стандарт
  • формат pdf
  • размер 159.02 КБ
  • добавлен 05 декабря 2011 г.
16 стр. The European Standard EN 10246-14:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies requirements for automatic ultrasonic testing of seamless and welded steel tubes, with the exception of submerged arc welded (SAW) tubes, for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. NOTE : An alternative test method for the detection of laminar imperf...

BS EN 10246-17: 2000 Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections

Стандарт
  • формат pdf
  • размер 175.86 КБ
  • добавлен 05 декабря 2011 г.
12 стр. The European Standard EN 10246-17:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies requirements for the full peripheral ultrasonic testing of the ends of seamless and welded tubes for the detection of laminar imperfections. The standard specifies acceptance levels and calibration procedures. This part of EN 10246 is applicable to the inspection of welded tubes with an outside diameter greater than 30...

BS EN 10246-18: 2000 Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections

Стандарт
  • формат pdf
  • размер 114.43 КБ
  • добавлен 05 декабря 2011 г.
10 стр. The European Standard EN 10246-18:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements for magnetic particle inspection of the end/bevel face at the ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections. This part of EN 10246 is to be used for the detection of laminar imperfections on the end/bevel face at the ends of plain end and bevelled end...

BS EN 10246-2: 2000 Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness

Стандарт
  • формат pdf
  • размер 425.88 КБ
  • добавлен 06 декабря 2011 г.
16 cтр. The European Standard EN 10246-2:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies requirements for automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes with the exception of submerged arc-welded (SAW) tubes for verification of hydraulic leak-tightness. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations...

BS EN 10246-3: 2000 Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections

Стандарт
  • формат pdf
  • размер 409.37 КБ
  • добавлен 06 декабря 2011 г.
18 стр. The European Standard EN 10246-3:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic eddy current testing of seamless and welded tubes with the exception of submerged arc-welded (SAW) tubes for the detection of imperfections. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applica...

BS EN 10246-5: 2000 Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal im

Стандарт
  • формат pdf
  • размер 134.17 КБ
  • добавлен 06 декабря 2011 г.
16 cтр. The European Standard EN 10246-5:1999 has the status of a British Standard November 1999 This Part of EN 10246 specifies the requirements for automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded ferromagnetic steel tubes, with the exception of submerged arc welded (SAW) tubes, for the detection of longitudinal imperfections. The standard specifies acceptance levels, calibration procedures and gives gui...

BS EN 10246-7: 2005 Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections

Стандарт
  • формат pdf
  • размер 458.61 КБ
  • добавлен 06 декабря 2011 г.
14 стр. The European Standard EN 10246-7:2005 has the status of a British Standard October 2005 This part of EN 10246 specifies the requirements for automatic full peripheral ultrasonic shear wave (including phased array technique) and Lamb wave testing of seamless and welded steel tubes, with the exception of submerged arc-weld (SAW) tubes, for the detection of longitudinal imperfections. This European Standard specifies acceptance levels and ca...

BS EN 10246-9: 2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections

Стандарт
  • формат pdf
  • размер 370.65 КБ
  • добавлен 06 декабря 2011 г.
14 стр. The European Standard EN 10246-9:2000 has the status of a British Standard February 2000 This part of EN 10246 specifies the requirements for the automatic ultrasonic testing of the weld seam of submerged arc-welded (longitudinally or helically) tubes for the detection of imperfections oriented predominantly parallel to and/or at right angles to the weld seam. The standard specifies acceptance levels and calibration procedures. European S...
  • 2008 — 2024 «СтудМед»