AWS A5.8-92 / ASME SFA-5.8 Specification for filler metals for brazing and braze welding. (Eng)

Published by the American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990, 2010, 290 pages Английский язык This Section contains rules relating to the qualification of welding and brazing procedures as required by other Code Sections for component manufacture. It also covers rules relating to the qualification and requalification of welders, brazers, and welding and brazing operators in order that they may perform...

This standard American Welding Society (AWS). 1980. 23p. This specification prescribes requirements for solid bare surfacing welding rods for use with the oxyfuel and gas tungsten arc welding processes. This specification also covers solid bare surfacing electrodes for use with the gas metal arc process and solid covered surfacing electrodes for use with the shielded metal arc welding process.

This standard American Welding Society (AWS). 1990. 18p. This specification prescribes requirements for the classification of the following: (a) Rods for oxyfuel gas welding; (b) Electrodes for gas metal arc welding; (c) Electrodes for flux cored arc welding; (d) Electrodes for shielded metal arc welding.

This standard American Welding Society (AWS). 1980. 20p. This specification prescribes requirements for composite surfacing welding rods and electrodes. The specification covers straight length bare and covered composite welding rods for use with the oxyfuel, gas tungsten arc, and atomic hydrogen welding processes.

This standard American Welding Society (AWS). 1992. 10p. This specification prescribes requirements for the classification of brazing fluxes used with brazing or braze welding filler metals such as those classified in AWS A5.8.

This standard American Welding Society (AWS). 1984. 10p. This specification prescribes requirements for the classification of copper and copper alloy bare welding rods and electrodes for plasma arc, gas metal arc, and gas tungsten arc welding

This standard American Welding Society (AWS). 1993. 25p. This specification prescribes requirements for the classification of bare stainless steel wire, strip, composite metal cored, and stranded welding electrodes and rods.The chromium content of these filler metals is not less than 10.5 percent and the iron content exceeds that of any other element.

This European Standard was approved by CEN on 1997-05-09. 12p. This standard specifies technical delivery conditions for filler metals for fusion welding. This standard does not apply to auxiliaries such as shielding gases.

First published in 1996 by The Growood Press Ltd Ramsbury Marlborough Wiltshire SN8 2HR This impression 2004, 150 p. ISBN 186126390 Soldering, Brazing & Welding is an ideal manual for anyone requiring comprehensive advice and instruction in these common forms of metalwork. Their applications are now increasingly widespread in the craft of metalwork, as well as more traditionally in light industry. Topics covered include procedure for makin...