API Spec 5L-2000 Specification for Line Pipe

American Institute of Steel Construction (AISC). Chicago, Illinois. 2005. 519p. This Specification has been based upon past successful usage, advances in the state of knowledge, and changes in design practice. The 2005 American Institute of Steel Construction’s Specification for Structural Steel Buildings for the first time provides an integrated treatment of Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD), and thus com...

American Petroleum Institute (API) Second Edition, March 2002. Effective Data, January 2005. 110p. These specifications establish design standards for systems, that are used to control blowout preventers (BOPs) and associated valves that control well pressure during drilling operations.

American Petroleum Institute (API) Fifth Edition, January 2002. 19p. This specification covers the fabrication of structural steel pipe formed from plate steel with longitudinal and circumferential butt-welded seams, typically in sizes 14 in. outside diameter (OD) and larger (40 in. and larger for LWDS) with wall thickness 3/8 in. and greater (up to a nominal 40 ft in length) suitable for use in construction of welded offshore structures.

American Petroleum Institute (API) Forty-third Edition, March 2004, Effective Date: October 2004. 171p. The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.

This standard American Welding Society (AWS). 2005. 50p. This specification prescribes requirements for the classification of carbon steel electrodes for flux cored arc welding (FCAW) either with or without shielding gas.

This standard American Welding Society (AWS). 2008. 22p. This specification establishes the minimum requirements for the Welding Quality Program for Welding Fabricators. This specification is intended to be used by welding fabricators regardless of the welding processes or materials used.

This standard American Welding Society (AWS). Draft. 60p. This specification contains the requirements for designing, friction stir welding, and inspecting aluminum, aerospace hardware. Friction stir welding (FSW) produces a weld between two butting workpieces by the friction heating and plastic material displacement caused by a rotating tool that traverses along the weld joint. This is a working document under consideration by an AWS Committee....

This standard American Welding Society (AWS). 2009. 18p. This specification establishes the requirements for certification and maintenance of certification in accordance with qualification requirements stated in AWS B5.14, Specification for the Qualification of Welding Sales Representatives.

This standard American Welding Society (AWS). 2008. 20p. This specification establishes the requirements and procedures for the certification of radiographic interpreters by the American Welding Society (AWS). It describes how personnel are certified, and outlines the principles of conduct and practices by which certification may be maintained.

This standard American Welding Society (AWS). 2008. 18p. This specification establishes the procedure by which a welding fabricator may seek, obtain, and maintain accreditation from AWS to participate in the AWS Certified Welding Fabricator Program.